Evaluation of durability and functional performance of porous polyurethane mixture in porous pavement

Amundsen, 2005 Chandrappa, 2016, Development of pavement-surface temperature predictive models: parametric approach, J. Mater. Civ. Eng., 28, 10.1061/(ASCE)MT.1943-5533.0001415 Chen, 2015, Permeability loss of open graded friction course mixtures due to deformation-related and particle-related clogging: understanding from laboratory investigation, J. Mater. Civ. Eng., 27, 10.1061/(ASCE)MT.1943-5533.0001282 Chen, 2015, Evaluation of thermal conductivity of asphalt concrete with heterogeneous microstructure, Appl. Therm. Eng., 84, 368, 10.1016/j.applthermaleng.2015.03.070 Chen, 2016, Rutting-induced permeability loss of open graded friction course mixtures, J. Test. Eval., 44, 719 Chen, 2017, Investigation of permeability of OGFC considering effects of anisotropy and two-dimensional flow, Constr. Build. Mater, 145, 218, 10.1016/j.conbuildmat.2017.04.028 Chen, 2017, Analytical approach for evaluating temperature field of thermal modified asphalt pavement and urban heat island effect, Appl. Therm. Eng., 113, 739, 10.1016/j.applthermaleng.2016.11.080 Chen, 2018, Experimental study on anti-icing and deicing performance of polyurethane concrete as road surface layer, Constr. Build. Mater., 161, 598, 10.1016/j.conbuildmat.2017.11.170 Colwill, 1993, Porous asphalt trials in the United Kingdom, Transp. Res. Rec., 1427, 13 Cong, 2018, Laboratory evaluation on performance of porous polyurethane mixtures and OGFC, Constr. Build. Mater, 169, 456, 10.1016/j.conbuildmat.2018.02.145 Goubert, 2014, Developing a durable and ultra-low noise poroelastic pavement Hamzah, 2012, Permeability loss in porous asphalt due to binder creep, Constr. Build. Mater., 30, 10, 10.1016/j.conbuildmat.2011.11.038 Hu, 2010, Application and functional conservation of porous asphalt pavement testing section in Shanghai Expo garden, Shanghai Highw., 3, 22 Huber, 2000 Kraemer, 1990 Lee, 2015, Polyurethane curing kinetics for polymer bonded explosives: HTPB/IPDI binder, Korean J. Chem. Eng., 32, 1701, 10.1007/s11814-014-0366-y Li, 2013, The use of reflective and permeable pavements as a potential practice for heat island mitigation and storm water management, Environ. Res. Lett., 8, 10.1088/1748-9326/8/1/015023 Liao, 2014, The effects of pavement surface characteristics on tire/pavement noise, Appl. Acoust., 76, 14, 10.1016/j.apacoust.2013.07.012 Liao, 2018, Shear bonding strength between poro-elastic road surface and sublayer with different bonding agents, J. Mater. Civ. Eng., 30, 10.1061/(ASCE)MT.1943-5533.0002216 Mallick, 2000, Design, construction and performance of new generation open-graded friction course, J. Assoc. Asph. Pav., 69, 391 Nielsen, 2005 Rath, 2008, Phase morphology and surface properties of moisture cured polyurethane-urea (MCPU) coatings: effect of catalysts, Prog. Org. Coat., 62, 393, 10.1016/j.porgcoat.2008.02.004 Rekondo, 2006, Synthesis of silanized polyether urethane hybrid systems, Study of the curing process through hydrogen bonding interactions, Eur. Polym. J., 42, 2069, 10.1016/j.eurpolymj.2006.03.024 Sandberg, 2002 Sandberg, 2011, PERSUADE – a European project for exceptional noise reduction by means of PoroElastic road surfaces Sun, 2016 Thives, 2017, Asphalt mixtures emission and energy consumption: a review, Renew. Sustain. Energy Rev., 72, 473, 10.1016/j.rser.2017.01.087 Wang, 2016, Life-cycle assessment of airport pavement design alternatives for energy and environmental impact, J. Clean. Prod., 133, 163, 10.1016/j.jclepro.2016.05.090 Wang, 2016, Modeling and optimization of acoustic absorption for porous asphalt concrete, J. Eng. Mech., 142, 10.1061/(ASCE)EM.1943-7889.0001037 Wang, 2017, Suitability of PoroElastic road surface (PERS) for urban roads in cold regions: mechanical and functional performance assessment, J. Clean. Prod., 165, 1340, 10.1016/j.jclepro.2017.07.228