Determining chloride content profiles in concrete using an electrical resistivity tomography device

Baroghel-Bouny, 2004, 252 Pang, 2016, Service life prediction of RC structures in marine environment using long term chloride ingress data: comparison between exposure trials and real structure surveys, Construct. Build. Mater., 113, 979, 10.1016/j.conbuildmat.2016.03.156 Chalee, 2009, Predicting the chloride penetration of fly ash concrete in seawater, Mar. Struct., 22, 341, 10.1016/j.marstruc.2008.12.001 I. Othmen, S. Bonnet, F. Schoefs, Investigation of different analysis methods for chloride profiles within a real structure in a marine environment, Ocean Eng. 157, 96-107. Hilsdorf, 2004 Fraj, 2012, New approach for coupled chloride/moisture transport in non-saturated concrete with and without slag, Construct. Build. Mater., 35, 761, 10.1016/j.conbuildmat.2012.04.106 Da Costa, 2013, Modelling of chloride penetration into non-saturated concrete: case study application for real marine offshore structures, Construct. Build. Mater., 43, 217, 10.1016/j.conbuildmat.2013.02.009 Bertolini, 2013 Neville, 1995, Chloride attack of reinforced concrete: an overview, Mater. Struct., 28, 63, 10.1007/BF02473172 Tuutti, 1982 Angst, 2009, Critical chloride content in reinforced concrete—a review, Cement Concr. Res., 39, 1122, 10.1016/j.cemconres.2009.08.006 R.T. 178-TMC, 2002, Analysis of total chloride content in concrete, Mater. Struct., 35, 583, 10.1617/13840 2012 Webster, 2014 Monfore, 1968, The electrical resistivity of concrete, Journal of PCA, 35 Robert, 1998, Dielectric permittivity of concrete between 50 Mhz and 1 Ghz and GPR measurements for building materials evaluation, J. Appl. Geophys., 40, 89, 10.1016/S0926-9851(98)00009-3 Whiting, 2003 du Plooy, 2015, Electromagnetic non-destructive evaluation techniques for the monitoring of water and chloride ingress into concrete: a comparative study, Mater. Struct., 48, 369, 10.1617/s11527-013-0189-z Polder, 2002, Characterisation of chloride transport and reinforcement corrosion in concrete under cyclic wetting and drying by electrical resistivity, Cement Concr. Compos., 24, 427, 10.1016/S0958-9465(01)00074-9 Spragg, 2017, Leaching of conductive species: implications to measurements of electrical resistivity, Cement Concr. Compos., 79, 94, 10.1016/j.cemconcomp.2017.02.003 Bu, 2014, The influence of alkali content on the electrical resistivity and transport properties of cementitious materials, Cement Concr. Compos., 51, 49, 10.1016/j.cemconcomp.2014.02.008 Fares, 2016, Determining the permittivity profile inside reinforced concrete using capacitive probes, NDT&E international, 79, 150, 10.1016/j.ndteint.2016.01.002 Klysz, 2007, Determination of volumetric water content of concrete using ground-penetrating radar, Cement Concr. Res., 37, 1164, 10.1016/j.cemconres.2007.04.010 Dérobert, 2008, Use of capacitive and GPR techniques for non-destructive evaluation of cover concrete, NDT&E International., 41, 44, 10.1016/j.ndteint.2007.06.004 Villain, 2018, Development of a calibration methodology to improve the on-site non-destructive evaluation of concrete durability indicators, Mater. Struct., 51, 40, 10.1617/s11527-018-1165-4 Polder, 2001, Test methods for on site measurement of resistivity of concrete -- a RILEM TC-154 technical recommendation, Construct. Build. Mater., 15, 125, 10.1016/S0950-0618(00)00061-1 Andrade, 2010, Concrete mixture design based on electrical resistivity, 28 Whittington, 1981, The conduction of electricity through concrete, Mag. Concr. Res., 33, 48, 10.1680/macr.1981.33.114.48 Hughes, 1985, New technique for determining the electrical resistivity of concrete, Mag. Concr. Res., 37, 243, 10.1680/macr.1985.37.133.243 Elkey, 1995 Saleem, 1996, Effect of moisture, chloride and sulphate contamination on the electrical resistivity of Portland cement concrete, Construct. Build. Mater., 10, 209, 10.1016/0950-0618(95)00078-X Sbartaï, 2007, Using radar direct wave for concrete condition assessment: correlation with electrical resistivity, J. Appl. Geophys., 62, 361, 10.1016/j.jappgeo.2007.02.003 Lataste, 2017, Chapter 4. Electrical methods Bonnet, 2018, Combination of the Wenner Resistivimeter and Torrent Permeameter Methods for Assessing Carbonation Depth and Saturation Level of concrete, Construct. Build. Mater., 188, 1149, 10.1016/j.conbuildmat.2018.07.151 Lübeck, 2012, Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag, Cement Concr. Compos., 34, 392, 10.1016/j.cemconcomp.2011.11.017 McCarter, 2001, Near surface sensors for condition monitoring of cover-zone concrete, Construct. Build. Mater., 15, 115, 10.1016/S0950-0618(00)00060-X Bässler, 2000 Banton, 1997, Mapping field-scale physical properties of soil with electrical resistivity, Soil Sci. Soc. Am. J., 61, 10.2136/sssaj1997.03615995006100040003x Loke, 2013, Recent developments in the direct-current geoelectrical imaging method, J. Appl. Geophys., 95, 135, 10.1016/j.jappgeo.2013.02.017 Lecieux, 2015, Quantification and uncertainty analysis of a structural monitoring device: detection of chloride in concrete using DC electrical resistivity measurement, Nondestr. Test. Eval., 30, 216, 10.1080/10589759.2015.1029476 du Plooy, 2013, Development of a multi-ring resistivity cell and multi-electrode resistivity probe for investigation of cover concrete condition, NDT E Int., 54, 27, 10.1016/j.ndteint.2012.11.007 Loke, 1999 du Plooy, 2013 Villain, 2015, Use of electromagnetic non-destructive techniques for monitoring water and chloride ingress into concrete, Near Surf. Geophys., 13, 299, 10.3997/1873-0604.2015016 Menke, 1989 Fares, 2015 Barker, 1989, Depth of investigation of collinear symmetrical four-electrode arrays, Geophysics, 54, 1031, 10.1190/1.1442728 Parasnis, 1986, 422 R.T. 178-TMC, 2002, Analysis of water soluble chloride content in concrete, Recommendation, Materials and Structures, 35, 586, 10.1617/13841 Vennesland, 2013, Recommendation of RILEM TC 178-TMC: testing and modelling chloride penetration in concrete. Methods for obtaining dust samples by means of grinding concrete in order to determine the chloride concentration profile, Mater. Struct.: RILEM Technical Committee, 46, 337, 10.1617/s11527-012-9968-1 Chaussadent, 1999, AFREM test procedures concerning chlorides in concrete: extraction and titration methods, Mater. Struct., 32, 230, 10.1007/BF02481520 Baroghel-Bouny, 2012, Prediction of chloride binding isotherms of cementitious materials by analytical model or numerical inverse analysis, Cement Concr. Res., 42, 1207, 10.1016/j.cemconres.2012.05.008 492, 1999 AFPC-AFREM, 1997 Zhou, 2001, Thermal stability and decomposition mechanisms of ettringite at <120°C, Cement Concr. Res., 31, 1333, 10.1016/S0008-8846(01)00558-0 XP P 18-461, 2012 XP P 18-462, 2012 Hunkeler, 1996, The resistivity of pore water solution- a decisive parameter of rebar corrosion and repair methods, Construct. Build. Mater., 10, 381, 10.1016/0950-0618(95)00029-1 Bonnet, 2017, Sources of uncertainties for total chloride profile measurements in concrete: quantization and impact on probability assessment of corrosion initiation, Eur. J. Environ. Civ. Eng.