A continuum damage model for fiber reinforced laminates based on ply failure mechanisms

Nairn, 1994, Matrix microcracking, vol. 9 Nettles AT, Biss EJ. Low temperature mechanical testing of carbon-fiber/epoxy-resin composite materials. Tech Rep TP 3663, NASA. 1996. Smith, 2000, Carbon fiber reinforced plastics – properties, vol. 2, 107 Rabotnov, 1969, Creep problems in structural members, vol. 7 Lemaitre, 1992 Cauvin, 1999, Damage mechanics: basic variables in continuum theories, Int J Solids Struct, 36, 747, 10.1016/S0020-7683(98)00044-4 Jones, 1999 Padhi, 1998, Progressive failure and ultimate collapse of laminated composite plates in bending, Compos Struct, 40, 277, 10.1016/S0263-8223(98)00030-0 Palanterä, 1999 Stiftinger MA. Semi-analytical finite element formulations for layered composite shells with consideration of edge effects. PhD thesis, Vienna University of Technology, Vienna, Austria. 1996. 2002, Special issue of Compos Sci Technol, 62, 12 2004, Special issue of Composites Science and Technology, 64, 3 Puck, 1996 Allen, 1994, Damage evolution in laminates, vol. 9 Allix, 1991, Delamination and damage mechanics, 143 Barbero, 2002, An inelastic damage model for fiber reinforced laminates, J Compos Mater, 36, 941, 10.1177/0021998302036008549 Ladevèze, 1991, On a damage mechanics approach, 119 Leukart, 2003, A comparison of damage models formulated on different material scales, Comput Mater Sci, 28, 749, 10.1016/j.commatsci.2003.08.029 Meraghni, 2002, Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures, Compos Sci Technol, 62, 2087, 10.1016/S0266-3538(02)00110-0 Talreja, 1992, Transverse cracking and stiffness reduction in cross ply laminates of different matrix toughness, J Compos Mater, 26, 1644, 10.1177/002199839202601105 Allix, 2003, A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues, Compos Struct, 81, 1177, 10.1016/S0045-7949(03)00035-X Ladevèze, 2001, A damage mesomodel of laminate composites, 1004 Johnson, 2001, Computational methods for predicting impact damage in composite structures, Compos Sci Technol, 61, 2183, 10.1016/S0266-3538(01)00111-7 Kilic, 2003, Progressive damage and nonlinear analysis of pultruded composite structures, Composites Part B, 34, 235, 10.1016/S1359-8368(02)00103-8 Moncel L. Etude des mécanismes d’endommagement d’un assemblage cuivre/composite carbone-carbone sous chargement thermomécanique. PhD thesis, Université Bordeaux I, Ecole Doctorale des Sciences Physiques et de L’Ingenieur, Bordeaux, France. 1999. Phillips, 2001, Damage development in composites with large stress gradients, Compos Sci Technol, 61, 2169, 10.1016/S0266-3538(01)00112-9 Joffe, 2001, COD-based simulation of transverse cracking and stiffness reduction in [S/90n]s laminates, Compos Sci Technol, 61, 637, 10.1016/S0266-3538(00)00172-X Talreja, 1994, Damage characterization by internal variables, vol. 9 Varna, 2001, A synergistic damage-mechanics analysis of transverse cracking in [±θ/904]s laminates, Compos Sci Technol, 61, 657, 10.1016/S0266-3538(01)00005-7 Soden, 1998, Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates, Compos Sci Technol, 58, 1011, 10.1016/S0266-3538(98)00078-5 Puck, 1998, Failure analysis of FRP laminates by means of physically based phenomenological models, Compos Sci Technol, 58, 1045, 10.1016/S0266-3538(96)00140-6 Schuecker C, Pahr D, Pettermann H. Accounting for residual stresses in FEM analyses of laminated structures using the Puck criterion for three-axial stress states. Compos Sci Technol 2006, in press. Rebière, 2002, Analysis of damage mode transition in a cross-ply laminate under uniaxial loading, Compos Struct, 55, 115, 10.1016/S0263-8223(01)00133-7 Lee, 1999, Failure of carbon/epoxy composite tubes under combined axial and torsional loading 2. Fracture morphology and failure mechanism, Compos Sci Technol, 59, 1789, 10.1016/S0266-3538(99)00041-X Benzarti, 2001, Transverse properties of unidirectional glass/epoxy composites: influence of fibre surface treatments, Composites Part A, 32, 197, 10.1016/S1359-835X(00)00136-6 Puck, 2002, Failure analysis of FRP laminates by means of physically based phenomenological models, Compos Sci Technol, 62, 1633, 10.1016/S0266-3538(01)00208-1 Pagano, 2000, Delamination of polymer matrix composites: problems and assessment, vol. 2, 433 Benveniste, 1987, A new approach to the application of Mori–Tanaka’s theory in composite materials, Mech Mater, 6, 147, 10.1016/0167-6636(87)90005-6 Mori, 1973, Average stress in the matrix and average elastic energy of materials with misfitting inclusions, Acta Metall, 21, 571, 10.1016/0001-6160(73)90064-3 Tandon, 1984, The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites, Polym Compos, 5, 327, 10.1002/pc.750050413 Gavazzi, 1990, On the numerical evaluation of Eshelby’s tensor and its application to elastoplastic fibrous composites, Comput Mech, 7, 13, 10.1007/BF00370053 Schuecker C. Mechanism based modeling of damage and failure in fiber reinforced polymer laminates. PhD thesis, Vienna University of Technology, Vienna, Austria, 2005. Soden, 2002, Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark data, Compos Sci Technol, 62, 1489, 10.1016/S0266-3538(02)00093-3 Winn, 2001, An investigation into the accuracy of a one-parameter nonlinear model for unidirectional composites, J Compos Mater, 35, 1491, 10.1106/M99D-14RL-NHHF-CHWN 1998, Special issue of Compos Sci Technol, 58, 7 Kaddour, 2003, Behaviour of ±45° glass/epoxy filament wood composite tubes under quasi-static equal biaxial tension–compression loading: experimental results, Composites Part B, 34, 689, 10.1016/S1359-8368(03)00077-5 Lee, 1999, Failure of carbon/epoxy composite tubes under combined axial and torsional loading 1. Experimental results and prediction of biaxial strength by the use of neural networks, Compos Sci Technol, 59, 1779, 10.1016/S0266-3538(99)00038-X Chiu, 1997, The role of material nonlinearities in composite structures, Compos Struct, 38, 71, 10.1016/S0263-8223(97)00043-3 Puck, 2002, Guidelines for the determination of the parameters in Puck’s action plane strength criterion, Compos Sci Technol, 62, 371, 10.1016/S0266-3538(01)00202-0 Schuecker C, Pettermann HE. Constitutive ply damage modeling, FEM implementation, and analyses of laminated structures. In: Proc. of the III European Conference on Computational Mechanics (ECCM 2006), Lisbon, Portugal, 2006, paper 1759.