The production and application of metal matrix composite materials

Corbin, 1996, The tensile properties of a particulate reinforced Al alloy in the temperature range 196–300°C, Canad. Metall. Quart., 35, 189 Gupta, 1996, Effect of type of processing on the microstructural features and mechanical properties of Al–Cu/Si metal matrix composites, Mater. Sci. Eng. A, 210, 114, 10.1016/0921-5093(95)10077-6 K.U. Kainer, Cast magnesium alloys reinforced by short fibres, in: Proceedings of the International Conference on Magnesium Alloys and their Applications, Garmisch-Partenkirchen, DGM Informationsgessellschaft, Oberursel, 1992, pp. 415–422. Henning, 1994, Einfluß der Wärmebehandlung auf die Faserstabilität in verstärkten Al–Si-Leichtmetall-Kolbenlegierungen, Metall, 48, 451 Kainer, 1990, Herstellung und Eigenschaften von kurzfaserverstärkten Magnesiumlegierungen, Metall, 44, 438 Richter, 1994, Die physikalische Eigenschaften des Langfaserverbundgusses AlSi/30vol.% Al2O3 sowie Kurzfaserverbundgusses AlSi/16vol.% Al2O3, Metall, 48, 106 Bowman, 1995, Processing and mechanical properties of Al2O3 fiber-reinforced NiAl composites, Metall. Mater. Trans. A, 26, 615, 10.1007/BF02663910 Schröder, 1991, Magnesium base hybrid composites prepared by liquid infiltration, Mater. Sci. Eng. A, 135, 243, 10.1016/0921-5093(91)90532-R S. Abkowitz, P.F. Weihrauh, S.M. Abkowitz, Particulate-reinforced titanium alloy composites economically formed by combined cold and hot isostatic pressing, Ind. Heating (September 1993) 32–37. Anonym: Pulvertechnologisch in die Zukunft, Metall 49 (1995) 741–746. Doel, 1996, Tensile properties of particulate-reinforced metal matrix composites, Composites A, 27, 655, 10.1016/1359-835X(96)00040-1 Mordike, 1991, Effect of tungsten content on the properties and structure of cold extruded Cu–W composite materials, Powder Metall. Int., 23, 91 K.U. Kainer, J. Schröder, B.L. Mordike, Influence of various P/M production methods on the properties of magnesium–SiC-Composites, in: L. Chandra, A.K. Dhingra (Eds.), Proceedings of the International Conference on Advanced Composites 1993, TMS, 1993, pp. 1061–1065. Kaczmar, 1992, Effect of alumina fibre content on properties of PM 6061 aluminium alloys based composite materials, Powder Metall., 35, 133, 10.1179/pom.1992.35.2.133 Kainer, 1993, Strangpressen von kurzfaserverstärkten Magnesium-Verbundwerkstoffen, Umformtechnik, 2, 116 Ames, 1995, Wear mechanisms in hybrid composites of graphite-20% SiC in A356 aluminium alloy (Al-7% Si-0.3% Mg), Metall. Mater. Trans. A, 26, 85, 10.1007/BF02669796 Skolianos, 1996, Mechanical behaviour of cast SiCp reinforced Al–4.5%Cu–1.5%Mg alloy, Mater. Sci. Eng. A, 210, 76, 10.1016/0921-5093(95)10043-1 Kehler, 1995, Partikelverstärkte Leichtmetalle, Metall, 49, 191 Han, 1996, Superplastic deformation mechanisms of particulate reinforced aluminium alloy matrix composites, Mater. Sci. Eng., 212, 256, 10.1016/0921-5093(96)10208-2 Kaczmar, 1989, Effect of production engineering parameters on structure and properties of Cu–W composite powders, Powder Metall., 32, 171 Kathari, 1984, Sintering behaviour of copper containing titania, Modern Develop. Powder Metall., 16, 361 Warrier, 1984, Copper–titania electrical contacts, Powder Metall., 29, 65, 10.1179/pom.1986.29.1.65 Benjamin, 1974, The mechanism of mechanical alloying, Metall. Trans., 5, 1929, 10.1007/BF02644161 Gonzalez-Carrasco, 1995, Void formation during oxidation of the ODS alloy MA 6000, Metall. Mater. Trans. A, 26, 915, 10.1007/BF02649088 Saji, 1995, Amorphization promoted by mechanical alloying of aluminium-rich Al–Ti–Fe mixed powders, Metall. Mater. Trans. A, 26, 1305, 10.1007/BF02670624 Zoz, 1995, Attritor technologie-stand der technik, Metall, 49, 196 K. Hummert, Sprühkompaktieren von Aluminiumwerkstoffen im industriellen Maßstab-Stand der Entwicklung, in: K. Bauckhage, V. Uhlenwinkel (Eds.), Sprühkompaktieren-Sprayforming, Sonderforschungsbereich, Vol. 372, Universität Bremen, 1995, pp. 199–214. T. Ebert, F. Moll, K.U. Kainer, Spray forming of magnesium alloys and composites, in: Proceedings of the Third International Conference on Spray Forming, Cardiff, UK, September 1996, pp. 115–123. E.J. Lavernia, Spray atomization and deposition of metal matrix composites, in: K. Bauckhage, V. Uhlenwinkel (Eds.), Sprühkompoktieren-Sprayforming, Sonderforschungsbereich, Vol. 372, Universität Bremen, 1995, pp. 63–122. Singer, 1970, The principles of spray rolling of metals, Met. Mater., 4, 246 Leatham, 1993, The Osprey process: principles and applications, Int. J. Powder Metall., 29, 321 R.D. Doherty, in: Proceedings of the First International Conference on Spray Forming, Swansea, UK, September 1990, Int. J. Powder Metall. 27 (1991) 67–69. Moran, 1990, Developing intelligent control for spray forming processes, J. Inst. Met., 42, 21 Lavernia, 1987, The structures and properties of Mg–Al–Zr and Mg–Zn–Zr alloys produced by LDC, Mater. Sci. Eng. A, 95, 225, 10.1016/0025-5416(87)90514-3 Lavernia, 1991, Precipitation and excess solid solubility in Mg–Al–Zr and Mg–Zn–Zr processed by spray atomozation and deposition, Mater. Sci. Eng. A, 132, 119, 10.1016/0921-5093(91)90368-W W. Böhm, K.U. Kainer, Squeeze-casting von SiC-Partikel verstärkten Magnesiumlegierungen, Verbundwerkstoffe und Werkstoffverbunde, DGM Informationsgesellschaft, Verlag, Oberursel, 1996, pp. 479–482. K.U. Kainer, U. Roos, B.L. Mordike, Platelet-reinforced magnesium alloys, in: Proceedings of the First Slovene-German Seminar on Joint Projects in Materials Science and Technology, Portoroz, Slovenia, October 1994, pp. 219–224. Kainer, 1995, Preßgiessen (squeeze-casting) von magnesium-legierungen, VDI Berichte, 1235, 117 L. Duffy, Magnesium alloys: the light choice for aerospace, Materials World (March 1996) 127–130. V. Arnold, U. Eilrich, Pulvermetallurgische Aluminium-Hochleistungswerkstoffe, DGM Fortbildungsseminar, Technische Universität Clausthal, Oktober 1990, pp. 1–20. Kemppinen, 1991, Characteristics of extrusions made from mechanically alloyed Al–Mg and Al–Mg–Li alloys, Adv. Powder Metall., 6, 103 P. Le Brun, L. Froyen, B. Munar, L. Delaey, Assesment of the stability of mechanically alloyed aluminium alloys, in: Proceedings of the 1990 International Powder Metallurgy Conference, Vol. 2, London, UK, February 1990, pp. 1–6. C.R. Crow, R.A. Gray, D.F. Hasson, Microstructure controlled fracture toughness of SiC/Al metal matrix composites, in: Proceedings of the Fifth International Conference on Composite Materials, ICCM V, San Diego, California, 1985, pp. 843–866. DURALCAN — Composites for Wrought Products: Mechanical and Physical Property Data, Duralcan, USA, San Diego, CA, 1995, pp. 199–203. Anonym: Materials at the 1996 SAE International Congress and Exposition, Adv. Mater. Process. (7) (1996) 33–36. Ford, 1996, Metallverbundwerkstoffe in der Praxis, Metall, 50, 350 Willis, 1988, Spray deposition process for metal matrix composites, Met. Mater., 4, 485 S. Abkowitz, P.F. Weihrauch, S.M. Abkowitz, H. Heussi, The commercial application of low cost titanium composites, J. Inst. Met. (August 1995) 40–41. T. Saito, T. Furuta, T. Yamaguchi, Development of low cost titanium matrix composite, in: F.H. Froes, J. Storer (Eds.), Advances in Titanium Metal Matrix Composites, The Minerals, Metals and Materials Society, 1995. W. Eisen, PM superalloys: past, present and future, Mater. World (January 1996) 22–24. Imperial Chemical Industries, Company’s Prospect, 1996. A. Kleine, H.J. Eschborn, J. Hemptenmacher, K.U. Kainer, Vergleichende TEM-Untersuchungen an Faser-Matrix Grenzflächen in Kohlenfaser verstarkten Magnesiumlegierungen, Verbundwerkstoffe und Werkstoffverbunde, DGM Informationsgesellschaft-Verlag, Oberursel, 1996, pp. 505–512. J. Kiehn, C. Köhler, K.U. Kainer, Stress relaxation behaviour of thermally cycled short fibre reinforced Mg alloys, in: Proceedings of 10th International Conference on Composite Materials (ICCM 10), Vol. 2, Whistler, Canada, August 1995, pp. 661–668. H.P. Degischer, P. Schultz, W. Lacom, Erreichte Kennwerte endlosfaserverstärkter Al- und Mg-Matrixverbundwerkstoff hergestellt mittels Gasdruckinfiltration, Verbundwerkstoffe und Werkstoffverbunde, DGM Informationsgesellschaft-Verlag, Oberursel, 1996, pp. 517–520. J.W. Kaczmar, A. Janus, Z. Samsonowicz, Wpływ parametrów technologicznych na wytwarzanie wybranych części maszyn umacnianych włóknami ceramicznymi, Projekt Badawczy nr 7 T07D 020 09, 1995–1998, Komitet Badań Naukowych, Warszawa, Poland. J.W. Kaczmar, K.U. Kainer, 6061 Al-base PM composite materials strengthened with delta-alumina fibres, in: Proceedings of the International Conference on Advances in Materials and Processing Technologies, Vol. III, Dublin, Ireland, August 1993, pp. 2069–2078. J.W. Kaczmar, A. Janus, Properties of squeeze-cast Al-base composite materials strengthened with delta alumina fibres, in: Proceedings of the 19th Congress of the International Council for the Aeronautical Sciences, Vol. 2, Anaheim, USA, September 1994, pp. 1814–1823. J.W. Kaczmar, A. Janus, Z. Samsonowicz, Badanie własciwości i struktury materiałów kompozytowych na osnowie aluminium umacnianych włóknami ceramicznymi tlenku glinu, Projekt Badawczy nr 7 S201 076 04, 1993–1995, Komitet Badań Naukowych, Warszawa. Włosiński, 1993, Carbon fibre copper composites made by volumetric bonding, Adv. Composite Lett., 2, 219, 10.1177/096369359300200606 Włosiński, 1995, Correlation between interfacial microstructure and conditions of bonding in carbon fibre-copper composites, Adv. Composite Lett., 4, 57, 10.1177/096369359500400205 Włosiński, 1994, Carbon fibre-copper composites obtained by foil casting, Adv. Composite Lett., 3, 69 Graf, 1993, Effect of heat treatment on alumina short-fibre-reinforced magnesium composites, Praktische Metallographie, 30, 540 Vedani, 1996, Damage and ductility of particulate and short-fibre Al–Al2O3 composites, Acta Mater., 44, 3077, 10.1016/1359-6454(95)00437-8 Jiang, 1995, Workability of aluminium-based metal-matrix composites in cold compression, Composites, 26, 62, 10.1016/0010-4361(94)P3631-A Furukawa, 1995, An investigation of strain hardening and creep in an Al-6061/Al2O3 metal matrix composite, Metall. Mater. Trans. A, 26, 633, 10.1007/BF02663912 Brooksbank, 1969, Tessellated stresses associated with inclusions in steel, JISI, 207, 474 You, 1987, Proposed failure mechanism in a discontinuously reinforced aluminium alloy, Scripta Metall., 21, 181, 10.1016/0036-9748(87)90431-5 Mc Daniels, 1985, Analysis of stress–strain, fracture and ductility behaviour of alumium matrix composites containing discontinuous silicon carbide reinforcements, Metall. Trans. A, 16, 1105, 10.1007/BF02811679