Design of a new dynamic torque generation machine based on the principle of Kibble balance

Peschel, 1997, The state of the art and future development of metrology in the field of torque measurement in Germany, Proc. 14th IMEKO World Congress, 65 Merlo, 1999, Metrology of torque: new developments at the CNR-IMGC, Proc. 15th IMEKO World Congress, 1 Davis, 1999, Development of the UK National Standard Static Torque Calibration Facility, Proc. 15th IMEKO World Congress, 25 Ohgushi, 2000, Development of the 1 kN m torque standard machine, Proc. 16th IMEKO World Congress, 217 Ohgushi, 2002, Design and development of 20 kN·m deadweight torque standard machine, Proc. 18th IMEKO TC3 Conf., 327 Peschel, 2003, Main focus in the development of metrology in the field of torque measurement in Germany, Proc. APMF 2003 IMEKO TC3, 3 Robinson, 2005, The commissioning of the first UK national standard static torque calibration machine, Proc. 19th IMEKO TC3 Conf. Carbonell, 2006, Torque standard machine at CEM, Proc. 18th IMEKO World Congress Park, 2007, Establishment of torque standards in KRISS, Proc. 20th IMEKO TC3 Conf Zhimin, 2009, The development of 100 nm torque standard machine at NIM, Proc. 19th IMEKO World Congress, 339 Ogushi, 2012, Range expansion of the reference torque wrench calibration service to 5 kN m at NMIJ, Measurement, 45, 1200, 10.1016/j.measurement.2012.01.016 Nishino, 2014, Uncertainty evaluation of a 10 N·m dead weight torque standard machine and comparison with a 1 kN·m dead weight torque standard machine, Measurement, 49, 77, 10.1016/j.measurement.2013.11.033 Röske, 2014, 87 Zhimin, 2015, “The development of 1 mN m–1 N·m torque standard machine at NIM”, Proc. APMF 2015, 70 Bruns, 2003, Sinusoidal torque calibration: a design for traceability in dynamic torque calibration, Proc. 17th IMEKO World Congress, 282 Klaus, 2012, Determination of model parameters for a dynamic torque calibration device, Proc. 20th IMEKO World Congress, 459 Klaus, 2015, Dynamic torque calibration, PTB-Mitteilungen, 125, 12 Klaus, 2016, Model parameter identification from measurement data as a prerequisite for dynamic torque calibration - Measurement results and validation, ACTA IMEKO, 5, 55, 10.21014/acta_imeko.v5i3.318 Tao, 2009, The torque standard machines in China, Proc. 19th IMEKO World Congress, 347 Li, 2017, Negative step dynamic torque calibration machine, 5 Kim, 2018, Design of the new dual-mode torque standard machine, Proc. ESW2018, 6 Nishino, 2017, Design of a new torque standard machine based on a torque generation method using electromagnetic force, Measurement Science and Technology, 1 Stock, 2013, Watt balance experiments for the determination of the Planck constant and the redefinition of the kilogram, Metrologia, 10.1088/0026-1394/50/1/R1