Combined tension-bend system for large deformation analysis

Okamura, H., Takano, T., and Watanabe, K., “Application of Fracture Mechanics to the Analysis of Statically Indeterminate Structure,” Mechanical Behavior of Materials 1: 245–255 (1972). Okamura, H., Watanabe, K., and Takano, T., “Application of the Compliance Concept in Fracture Mechanics,” ASTM STP 536: 423–438 (1973). Okamura, H., Watanabe, K., and Takano, T., “Deformation and Strength of Cracked Member under Bending Moment and Axial Force,” Engineering Fracture Mechanics 7: 531–539 (1975). Okamura, H., Kageyama, K., and Takahata, Y., “Lower Bound Solution and Their Application of the Collapse Load of a Cracked Member under Axial Force and Bending Moment,” ASTM STP 803: 2262–2277 (1983). Shiratori, M., and Miyoshi, T., Transactions of the Japan Society of Mechanical Engineers (in Japanese), Series A, 46: 837–843 (1980). Matsubara, M., “A Parametric Study on J-integral under Pressurized Thermal Shock by Using Statically Indeterminate Fracture Mechanics,” Nuclear Engineering and Design 196: 153–159 (2000). Matsubara, M., Stumpfrock, L., and Roos, E., “Application of Statically Indeterminate Fracture Mechanics, SIFM, to aCircumferentially Cracked Cylinder Problem,” Nuclear Engineering and Design 207: 351–357 (2001). Miller, A.G., “Review of Limit Loads of Structures Containing Defects,” International Journal of Pressure Vessels and Piping 32: 197–235 (1988). Dowling, A.R., and Townley, H.A., “The Defects on Structural Failure; A Two Criteria Approach,” International Journal of Pressure Vessels and Piping 3: 77–106 (1975). Milne, I, Ainsworth, R., Dowlin, A.R., and Stewart, A.T. Assessment of the Integrity of Structure Containing Defects, GEGB Report, R/H/R6-Rev.3 (1987). JSME, “Standard Method of Test for Elastic-plastic Fracture Toughness,” 1–23 (1981). Green, A.P., “The Plastic Yielding of Notched Bar Due to Bending,” Quarterly Journal of Mechanics and Applied Mathematics 6: 223–239 (1953). Rice, J.R., “The Line Spring Model for Surface Flaws,” Proceedings of American Society of Mechanical Engineers Flaw Symposium, 171–185 (1972).