Application of porous materials for the flow field in polymer electrolyte membrane fuel cells

Larminie, 2003 Sharma, 2015, Hydrogen the future transportation fuel: from production to applications, Renew. Sustain. Energy Rev., 43, 1151, 10.1016/j.rser.2014.11.093 Li, 2005, Review of bipolar plates in PEM fuel cells: flow-field designs, Int. J. Hydrogen Energy, 30, 359, 10.1016/j.ijhydene.2004.09.019 Peng, 2014, Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 39, 21127, 10.1016/j.ijhydene.2014.08.113 Lim, 2016, Effects of flow field design on water management and reactant distribution in PEMFC: a review, Ionics, 22, 301, 10.1007/s11581-016-1644-y Wilberforce, 2019, A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells, Renew. Sustain. Energy Rev., 111, 236, 10.1016/j.rser.2019.04.081 Song, 2019, Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell, Int. J. Hydrogen Energy Manso, 2012, Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review, Int. J. Hydrogen Energy, 37, 15256, 10.1016/j.ijhydene.2012.07.076 Kandlikar, 2009, Measurement of flow maldistribution in parallel channels and its application to ex-situ and in-situ experiments in PEMFC water management studies, Int. J. Heat Mass Tran., 52, 1741, 10.1016/j.ijheatmasstransfer.2008.09.025 Maharudrayya, 2006, Pressure drop and flow distribution in multiple parallel-channel configurations used in proton-exchange membrane fuel cell stacks, J. Power Sources, 157, 358, 10.1016/j.jpowsour.2005.07.064 Jeon, 2008, The effect of serpentine flow-field designs on PEM fuel cell performance, Int. J. Hydrogen Energy, 33, 1052, 10.1016/j.ijhydene.2007.11.015 Spernjak, 2010, In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells, J. Power Sources, 195, 3553, 10.1016/j.jpowsour.2009.12.031 Wang, 2008, Effects of flow channel geometry on cell performance for PEM fuel cells with parallel and interdigitated flow fields, Electrochim. Acta, 53, 5334, 10.1016/j.electacta.2008.02.095 Lakshminarayanan, 2019, Numerical analysis for two pass interdigitated flow channel of PEMFC, Int. J. Ambient Energy, 1 Jiao, 2011, Water transport in polymer electrolyte membrane fuel cells, Prog. Energy Combust. Sci., 37, 221, 10.1016/j.pecs.2010.06.002 Wang, 2009, Porous-media flow fields for polymer electrolyte fuel cells II. Analysis of channel two-phase flow, J. Electrochem. Soc., 156, B1134, 10.1149/1.3183785 Zheng, 2012, Computational exploration of ultra-high current PEFC operation with porous flow field, J. Electrochem. Soc., 159, F267, 10.1149/2.048207jes Srouji, 2013, Ultra-high current density water management in polymer electrolyte fuel cell with porous metallic flow field, J. Power Sources, 239, 433, 10.1016/j.jpowsour.2013.03.145 Carton, 2015, Representative model and flow characteristics of open pore cellular foam and potential use in proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 40, 5726, 10.1016/j.ijhydene.2015.02.122 Afshari, 2020, Computational analysis of heat transfer in a PEM fuel cell with metal foam as a flow field, J. Therm. Anal. Calorim., 139, 2423, 10.1007/s10973-019-08354-x Lefebvre, 2008, Porous metals and metallic foams: current status and recent developments, Adv. Eng. Mater., 10, 775, 10.1002/adem.200800241 Hontanon, 2000, Optimisation of flow-field in polymer electrolyte membrane fuel cells using computational fluid dynamics techniques, J. Power Sources, 86, 363, 10.1016/S0378-7753(99)00478-4 Maricle, 1978, Carbon foam fuel cell component, US Patent, 4125676 Murphy, 1998, Low-cost light weight high power density PEM fuel cell stack, Electrochim. Acta, 43, 3829, 10.1016/S0013-4686(98)00143-1 Yuan, 2012, Porous metal materials for polymer electrolyte membrane fuel cells - a review, Appl. Energy, 94, 309, 10.1016/j.apenergy.2012.01.073 Tan, 2018, Overview of porous media/metal foam application in fuel cells and solar power systems, Renew. Sustain. Energy Rev., 96, 181, 10.1016/j.rser.2018.07.032 Hossain, 2015, Metal foams application to enhance cooling of open cathode polymer electrolyte membrane fuel cells, J. Power Sources, 295, 275, 10.1016/j.jpowsour.2015.07.022 Birgersson, 2006, A quantitative study of the effect of flow-distributor geometry in the cathode of a PEM fuel cell, J. Power Sources, 153, 76, 10.1016/j.jpowsour.2005.03.211 Carton, 2017, Three-dimensional proton exchange membrane fuel cell model: comparison of double channel and open pore cellular foam flow plates, Energy, 136, 185, 10.1016/j.energy.2016.02.010 Kim, 2018, Application of metal foam as a flow field for PEM fuel cell stack, Fuel Cell., 18, 123, 10.1002/fuce.201700180 Wang, 2020, Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology, Energy AI, 1, 100014, 10.1016/j.egyai.2020.100014 Lee, 2019, Application of carbon felt as a flow distributor for polymer electrolyte membrane fuel cells, J. Electrochem. Soc., 166, F74, 10.1149/2.0461902jes Park, 2019, Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam, Electrochim. Acta, 323, 134808, 10.1016/j.electacta.2019.134808 Kim, 2010, Development of porous carbon foam polymer electrolyte membrane fuel cell, J. Power Sources, 195, 2291, 10.1016/j.jpowsour.2009.10.053 Wu, 2020, Characterization of water management in metal foam flow-field based polymer electrolyte fuel cells using in-operando neutron radiography, Int. J. Hydrogen Energy, 45, 2195, 10.1016/j.ijhydene.2019.11.069 Kumar, 2004, Materials and design development for bipolar/end plates in fuel cells, J. Power Sources, 129, 62, 10.1016/j.jpowsour.2003.11.011 Gamburzev, 2002, Recent progress in performance improvement of the proton exchange membrane fuel cell (PEMFC), J. Power Sources, 107, 5, 10.1016/S0378-7753(01)00970-3 Tabe, 2013, Performance characteristics and internal phenomena of polymer electrolyte membrane fuel cell with porous flow field, J. Power Sources, 238, 21, 10.1016/j.jpowsour.2013.03.047 Tsai, 2012, Effects of flow field design on the performance of a PEM fuel cell with metal foam as the flow distributor, Int. J. Hydrogen Energy, 37, 13060, 10.1016/j.ijhydene.2012.05.008 Huo, 2017, Experimental investigation on PEM fuel cell cold start behavior containing porous metal foam as cathode flow distributor, Appl. Energy, 203, 101, 10.1016/j.apenergy.2017.06.028 Liu, 2020, Performance improvement of proton exchange membrane fuel cells with compressed nickel foam as flow field structure, Int. J. Hydrogen Energy, 45, 17833, 10.1016/j.ijhydene.2020.04.238 Fly, 2019, X-ray tomography and modelling study on the mechanical behaviour and performance of metal foam flow-fields for polymer electrolyte fuel cells, Int. J. Hydrogen Energy, 44, 7583, 10.1016/j.ijhydene.2019.01.206 Tseng, 2012, A PEM fuel cell with metal foam as flow distributor, Energy Convers. Manag., 62, 14, 10.1016/j.enconman.2012.03.018 Ting, 2012, Effect of operational parameters on the performance of PEMFC assembled with Au-coated Ni-foam, Int. J. Hydrogen Energy, 37, 13696, 10.1016/j.ijhydene.2012.02.142 Kim, 2020, Study on polymer electrolyte fuel cells with nonhumidification using metal foam in dead-ended operation, Energies, 13 Shin, 2018, Effect of cell size in metal foam inserted to the air channel of polymer electrolyte membrane fuel cell for high performance, Renew. Energy, 115, 663, 10.1016/j.renene.2017.08.085 Jang, 2019, Enhanced water management of three-dimensional graphene-Ni foam with patterned wettability in a polymer electrolyte membrane fuel cell, ACS Sustain. Chem. Eng., 7, 15487, 10.1021/acssuschemeng.9b03117 Sim, 2018, Formation of 3D graphene-Ni foam heterostructures with enhanced performance and durability for bipolar plates in a polymer electrolyte membrane fuel cell, J. Mater. Chem. A., 6, 1504, 10.1039/C7TA07598G Lee, 2017, Graphene as corrosion protection for metal foam flow distributor in proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 42, 22201, 10.1016/j.ijhydene.2017.03.233 Lee, 2020, Two/three-dimensional reduced graphene oxide coating for porous flow distributor in polymer electrolyte membrane fuel cell, Int. J. Hydrogen Energy, 45, 12972, 10.1016/j.ijhydene.2020.02.092 Awin, 2019, Experimental performance assessment of metal-foam flow fields for proton exchange membrane fuel cells, Appl. Energy, 252, 10.1016/j.apenergy.2019.113458 Sajid Hossain, 2019, Reticulated porous and parallel channel cathode flow fields in real scale polymer electrolyte membrane fuel cells: a comparative experimental study, Int. J. Hydrogen Energy, 44, 25905, 10.1016/j.ijhydene.2019.08.030 Park, 2019, Achieving breakthrough performance caused by optimized metal foam flow field in fuel cells, Int. J. Hydrogen Energy, 44, 22074, 10.1016/j.ijhydene.2019.06.073 Ahn, 2017, Effect of porous metal flow field in polymer electrolyte membrane fuel cell under pressurized condition, Fuel Cell., 17, 652, 10.1002/fuce.201700042 Kozakai, 2016, Improving gas diffusivity with bi-porous flow-field in polymer electrolyte membrane fuel cells, Int. J. Hydrogen Energy, 41, 13180, 10.1016/j.ijhydene.2016.05.131 Kariya, 2014, Effects of the porous structures in the porous flow field type separators on fuel cell performances, Int. J. Hydrogen Energy, 39, 15072, 10.1016/j.ijhydene.2014.07.070 Tang, 2010, Feasibility study of porous copper fiber sintered felt: a novel porous flow field in proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 35, 9661, 10.1016/j.ijhydene.2010.06.101 Li, 2020, Fabrication of porous metal fiber sintered sheet as a flow field for proton exchange membrane fuel cell, Curr. Appl. Phys., 20, 686, 10.1016/j.cap.2020.03.001 Park, 2018, Enhancement of mass transport in fuel cells using three-dimensional graphene foam as flow field, Electrochim. Acta, 265, 488, 10.1016/j.electacta.2018.01.191 Arisetty, 2007, Metal foams as flow field and gas diffusion layer in direct methanol fuel cells, J. Power Sources, 165, 49, 10.1016/j.jpowsour.2006.12.008 Xu, 2016, Active multi-scale modeling and gas permeability study of porous metal fiber sintered felt for proton exchange membrane fuel cells, Int. J. Hydrogen Energy, 41, 7393, 10.1016/j.ijhydene.2016.03.060 Banhart, 2001, Manufacture, characterisation and application of cellular metals and metal foams, Prog. Mater. Sci., 46, 559, 10.1016/S0079-6425(00)00002-5 Kulshreshtha, 2020, Preparation of metal foam by different methods: a review, Mater. Today Proc., 26, 1784, 10.1016/j.matpr.2020.02.375 Wan, 2021, Fabrication, properties, and applications of open-cell aluminum foams: a review, J. Mater. Sci. Technol., 62, 11, 10.1016/j.jmst.2020.05.039 Singh, 2018, A survey of fabrication and application of metallic foams (1925–2017), J. Porous Mater., 25, 537, 10.1007/s10934-017-0467-1 Kumar, 2003, Polymer electrolyte membrane fuel cell with metal foam in the gas flow-field of bipolar/end plates, J. New Mater. Electrochem. Syst., 6, 231 Kumar, 2003, Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow field of the bipolar/end plates, J. Power Sources, 114, 54, 10.1016/S0378-7753(02)00540-2 Wang, 1981, Reticulated vitreous carbon-a new versatile electrode material, Electrochim. Acta, 26, 1721, 10.1016/0013-4686(81)85156-0 Senn, 2004, Polymer electrolyte fuel cells with porous materials as fluid distributors and comparisons with tranditional channeled systems, J. Heat Tran., 126, 410, 10.1115/1.1738424 Chakrabarti, 2014, Application of carbon materials in redox flow batteries, J. Power Sources, 253, 150, 10.1016/j.jpowsour.2013.12.038 Sung, 2018 Chen, 2011, Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition, Nat. Mater., 10, 424, 10.1038/nmat3001 Lin, 2013, Significantly reduced thermal diffusivity of free-standing two-layer graphene in graphene foam, Nanotechnology, 24, 10.1088/0957-4484/24/41/415706 Fly, 2018, Characterisation of the diffusion properties of metal foam hybrid flow-fields for fuel cells using optical flow visualisation and X-ray computed tomography, J. Power Sources, 395, 171, 10.1016/j.jpowsour.2018.05.070 Wilberforce, 2019, Numerical modelling and CFD simulation of a polymer electrolyte membrane (PEM) fuel cell flow channel using an open pore cellular foam material, Sci. Total Environ., 678, 728, 10.1016/j.scitotenv.2019.03.430 Wilberforce, 2017, Computational fluid dynamic simulation and modelling (CFX) of flow plate in PEM fuel cell using aluminum open cellular foam material Baroutaji, 2017, Application of open pore cellular foam for air breathing PEM fuel cell, Int. J. Hydrogen Energy, 42, 25630, 10.1016/j.ijhydene.2017.05.114 Jeong, 2006, Effects of cathode open area and relative humidity on the performance of air-breathing polymer electrolyte membrane fuel cells, J. Power Sources, 158, 348, 10.1016/j.jpowsour.2005.09.044 Afshari, 2017, An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor, Energy, 118, 705, 10.1016/j.energy.2016.10.101 Kang, 2020, Study on the metal foam flow field with porosity gradient in the polymer electrolyte membrane fuel cell, Renew. Energy, 156, 931, 10.1016/j.renene.2020.04.142 Fly, 2019, Liquid water transport in porous metal foam flow-field fuel cells: a two-phase numerical modelling and ex-situ experimental study, Energies, 12, 10.3390/en12071186 Jo, 2018, Effects of metal foam properties on flow and water distribution in polymer electrolyte fuel cells (PEFCs), Int. J. Hydrogen Energy, 43, 14034, 10.1016/j.ijhydene.2018.01.134 Awin, 2019, Novel flow field for proton exchange membrane fuel cells made from 72%-porous aluminum foam, Procedia Comput. Sci., 158, 163, 10.1016/j.procs.2019.09.039 Onstad, 2011, Full-field measurements of flow through a scaled metal foam replica, Exp. Fluid, 50, 1571, 10.1007/s00348-010-1008-8 Dukhan, 2006, Correlations for the pressure drop for flow through metal foam, Exp. Fluid, 41, 665, 10.1007/s00348-006-0194-x Park, 2009, Effect of hydrophobicity and pore geometry in cathode GDL on PEM fuel cell performance, Electrochim. Acta, 54, 3473, 10.1016/j.electacta.2009.01.009 Bao, 2019, Numerical simulation for metal foam two-phase flow field of proton exchange membrane fuel cell, Int. J. Hydrogen Energy, 44, 6229, 10.1016/j.ijhydene.2019.01.086 Turhan, 2010, Impact of channel wall hydrophobicity on through-plane water distribution and flooding behavior in a polymer electrolyte fuel cell, Electrochim. Acta, 55, 2734, 10.1016/j.electacta.2009.11.095 Fukuyama, 2011, The influence of the liquid water behavior at the GDL-channel interface on cell performance, ECS Trans, 41, 583, 10.1149/1.3635591 Cai, 2006, Effects of hydrophilic/hydrophobic properties on the water behavior in the micro-channels of a proton exchange membrane fuel cell, J. Power Sources, 161, 843, 10.1016/j.jpowsour.2006.04.110 Gostick, 2006, Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells, J. Power Sources, 156, 375, 10.1016/j.jpowsour.2005.05.086 Jo, 2018, Numerical study on applicability of metal foam as flow distributor in polymer electrolyte fuel cells (PEFCs), Int. J. Hydrogen Energy, 43, 14012, 10.1016/j.ijhydene.2018.01.003 Tseng, 2016, Application of metal foams to high temperature PEM fuel cells, Int. J. Hydrogen Energy, 41, 16196, 10.1016/j.ijhydene.2016.06.149 Wang, 2009, Porous-media flow fields for polymer electrolyte fuel cells: I. Low humidity operation, J. Electrochem. Soc., 156, B1124, 10.1149/1.3183781 Srouji, 2012, Performance and mass transport in open metallic element architecture fuel cells at ultra-high current density, J. Power Sources, 218, 341, 10.1016/j.jpowsour.2012.06.075 Afshari, 2014, Performance analysis of a membrane humidifier containing porous metal foam as flow distributor in a PEM fuel cell system, Energy Convers. Manag., 88, 612, 10.1016/j.enconman.2014.08.067 Wang, 2006, An investigation on metallic bipolar plate corrosion in simulated anode and cathode environments of PEM fuel cells using potential-pH diagrams, Int. J. Electrochem. Sci., 1, 447, 10.1016/S1452-3981(23)17172-0 Lee, 2004, Corrosion-resistant component for PEM fuel cells, J. Power Sources, 131, 162, 10.1016/j.jpowsour.2004.01.008 Wu, 2008, A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies, J. Power Sources, 184, 104, 10.1016/j.jpowsour.2008.06.006 Tawfik, 2007, Metal bipolar plates for PEM fuel cell-A review, J. Power Sources, 163, 755, 10.1016/j.jpowsour.2006.09.088 Collier, 2006, Degradation of polymer electrolyte membranes, Int. J. Hydrogen Energy, 31, 1838, 10.1016/j.ijhydene.2006.05.006 Shi, 1997, Dehydration of protonated Nation® coatings induced by cation exchange and monitored by quartz crystal microgravimetry, J. Electroanal. Chem., 425, 117, 10.1016/S0022-0728(96)04945-5 Okada, 1998, Transport and equilibrium properties of Nafion® membranes with H+ and Na+ ions, J. Electroanal. Chem., 442, 137, 10.1016/S0022-0728(97)00499-3 Huang, 2003, XRD and XPS analysis of the degradation of the polymer electrolyte in H2-O2 fuel cell, Chem. Phys. Lett., 371, 80, 10.1016/S0009-2614(03)00259-8 Cheng, 2007, A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation, J. Power Sources, 165, 739, 10.1016/j.jpowsour.2006.12.012 Gubler, 2011, Radical (HO., H.and HOO.) formation and ionomer degradation in polymer electrolyte fuel cells, J. Electrochem. Soc., 158, B755, 10.1149/1.3581040 Inaba, 2006, Gas crossover and membrane degradation in polymer electrolyte fuel cells, Electrochim. Acta, 51, 5746, 10.1016/j.electacta.2006.03.008 Myung, 2008, Nanoparticle TiN-coated type 310S stainless steel as bipolar plates for polymer electrolyte membrane fuel cell, Electrochem. Commun., 10, 480, 10.1016/j.elecom.2008.01.001 Wang, 2007, An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells, J. Power Sources, 165, 293, 10.1016/j.jpowsour.2006.12.034 Zhang, 2010, Corrosion behavior of TiN-coated stainless steel as bipolar plate for proton exchange membrane fuel cell, Int. J. Hydrogen Energy, 35, 3721, 10.1016/j.ijhydene.2010.01.043 Antunes, 2010, Corrosion of metal bipolar plates for PEM fuel cells: a review, Int. J. Hydrogen Energy, 35, 3632, 10.1016/j.ijhydene.2010.01.059 Wang, 2012, Protective graphite coating on metallic bipolar plates for PEMFC applications, Electrochim. Acta, 62, 30, 10.1016/j.electacta.2011.11.026 Yi, 2010, Performance of a proton exchange membrane fuel cell stack using conductive amorphous carbon-coated 304 stainless steel bipolar plates, J. Power Sources, 195, 7061, 10.1016/j.jpowsour.2010.05.019 Prasai, 2012, Graphene: corrosion-inhibiting coating, ACS Nano, 6, 1102, 10.1021/nn203507y