Energy, exergy and economic analysis for a combined cooling heat and power system: A case study for a university campus

Kanoglu, M., and Çengel, Yunus A., Energy Efficiency and Management for Engineers. Department of Energy, 2016 Balakheli, 2020, Analysis of different arrangements of combined cooling, heating and power systems with internal combustion engine from energy, economic and environmental viewpoints, Energy Convers. Manag., 203, 10.1016/j.enconman.2019.112253 Asaee, 2015, An investigation of the techno-economic impact of internal combustion engine based cogeneration systems on the energy requirements and greenhouse gas emissions of the Canadian housing stock, Appl. Therm. Eng., 87, 505, 10.1016/j.applthermaleng.2015.05.031 Alexis, 2013, A case study of a cogeneration system for a hospital in Greece, Economic and Environmental Impacts,” Applied Thermal Engineering, 54, 488, 10.1016/j.applthermaleng.2013.02.019 Bianco, 2016, Implementation of a cogeneration plant for a food processing facility, A Case Study,” Applied Thermal Engineering, 102, 500, 10.1016/j.applthermaleng.2016.04.023 Armanasco, 2012, Techno-economic evaluation of commercial cogeneration plants for small and medium size companies in the Italian industrial and service sector, Appl. Therm. Eng., 48, 402, 10.1016/j.applthermaleng.2012.04.048 Biglia, 2017, Technical-economic feasibility of CHP systems in large hospitals through the energy hub method: the case of cagliari AOB, Energy Build., 147, 101, 10.1016/j.enbuild.2017.04.047 Padilla, 2018, vol. 2018, 1 Silveira, 2006, Thermoeconomic analysis of a cogeneration system of a university campus, Appl. Therm. Eng., 22, 1471, 10.1016/S1359-4311(02)00064-9 Maidment, 2002, Combined cooling heat and power in supermarkets, Appl. Therm. Eng., 22, 653, 10.1016/S1359-4311(01)00117-X Rosen, 1986, Comparison of energy and exergy efficiencies for cogeneration systems, ASME, 2 Feng, 2011, Exergoeconomic optimal performance of an irreversible closed Brayton cycle combined cooling, heating and power plant, Appl. Math. Model., 35, 4661, 10.1016/j.apm.2011.03.036 Ahmadi, 2011, Thermodynamic and exergoenvironmental analyses, and multi-objective optimization of a gas turbine power plant, Appl. Therm. Eng., 31, 2529, 10.1016/j.applthermaleng.2011.04.018 Bilgen, 2000, Exergetic and engineering analyses of gas turbine based cogeneration systems, Energy, 25, 1215, 10.1016/S0360-5442(00)00041-4 Erdil, 2005, Exergy optimization for an irreversible combined cogeneration cycle, J. Energy Inst., 78, 27, 10.1179/174602205X39588 Handbook of metaheuristics. Valdés, 2003, Thermoeconomic optimization of combined cycle gas turbine power plants using genetic algorithms, Appl. Therm. Eng., 23, 2169, 10.1016/S1359-4311(03)00203-5 Calise, 2017, A novel tool for thermoeconomic analysis and optimization of trigeneration systems: a case study for a hospital building in Italy, Energy, 126, 64, 10.1016/j.energy.2017.03.010 Li, 2014, Optimization and analysis of CCHP system based on energy loads coupling of residential and office buildings, Appl. Energy, 136, 206, 10.1016/j.apenergy.2014.09.020 Mehregan, 2022, Technical, economic and environmental analyses of combined heat and power (CHP) system with hybrid prime mover and optimization using genetic algorithm, Sustain. Energy Technol. Assessments, 49 Bugaj Michaelides, 2021 Balli, 2022, vol. 252 Yoru, 2010, Dynamic energy and exergy analyses of an industrial cogeneration system, Int. J. Energy Res., 34, 345, 10.1002/er.1561 Živić, 2016, Exergy analysis of a Brayton cycle with variable physical properties and variable composition of working substance, Teh. Vjesn., 23, 801 Rian, 2012, Exergy evaluation of the arctic snøhvit liquefied natural gas processing plant in northern Norway—significance of ambient temperature, Energy Fuels, 26, 1259, 10.1021/ef201734r Carragher, 2019, vol. 183, 35 Ahn, 2021, Opportunities for installed combined heat and power (CHP) to increase grid flexibility in the U.S, Energy Pol., 157, 10.1016/j.enpol.2021.112485 Ferjani, 2021 Dawson, 2004, vol. 3, 1297 2015 2018 2020 2022 Mahian, 2020, vol. 226 Renedo, 2005, Cogeneration in a hospital: a case study, REPQJ, 1, 202, 10.24084/repqj03.254 Combustion Associates Inc, “6 & 7 MW power generation system | Spirit 6 & 7 MW gas turbine power generator | CAI | combustion associates inc.”. 2022 Hughes, 2020 Altarawneh, 2022, Energy and exergy analyses for a combined cycle power plant in Jordan, Case Stud. Therm. Eng., 31, 10.1016/j.csite.2022.101852 2021 Goldstein, 2003 Yang, 2021, Novel design optimization of concentrated solar power plant with S-CO2 Brayton cycle based on annual off-design performance, Appl. Therm. Eng., 192, 10.1016/j.applthermaleng.2021.116924 2015 Wang, 2019, Energy, exergy, exergoeconomic and environmental (4E) analysis of a distributed generation solar-assisted CCHP (combined cooling, heating and power) gas turbine system, Energy, 175, 1246, 10.1016/j.energy.2019.03.147 Razak, 2007, 13 Zhu, 2021, Dynamic analysis of a closed Brayton cycle using supercritical carbon dioxide, J. Phys.: Conf. Ser., 2030 Saidur, 2010, Energy, exergy and economic analysis of industrial boilers, Energy Pol., 38, 2188, 10.1016/j.enpol.2009.11.087 Zhang, 2018, Exergy and energy analysis of a double evaporating temperature chiller, Energy Build., 165, 464, 10.1016/j.enbuild.2017.12.055 Barberis, 2016, Thermo-economic optimization of a real polygenerative district, Appl. Therm. Eng., 97, 1, 10.1016/j.applthermaleng.2015.09.012 Jones, 2017, 7 Ameri, 2016, Optimal design and operation of district heating and cooling networks with CCHP systems in a residential complex, Energy Build., 110, 135, 10.1016/j.enbuild.2015.10.050