Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes

Gibson, 2009, 123 Hiemenz, 2007, Electron beam melting, Adv Mater Process, 165, 45 Soboyejo, 2006, 359 Sercombe, 2008, Heat treatment of Ti–6Al–7Nb components produced by selective laser melting, Rapid Prototyping J, 14, 300, 10.1108/13552540810907974 Biamino, 2011, Electron beam melting of Ti–48Al–2Cr–2Nb alloy: microstructure and mechanical properties investigation, Intermetallics, 19, 776, 10.1016/j.intermet.2010.11.017 Kahnert, 2007, Layer formations in electron beam sintering, 88 Gong, 2012, Effect of defects on fatigue tests of as-built Ti–6Al–4V parts fabricated by selective laser melting, 499 Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti–6Al–4V, Acta Mater, 58, 3303, 10.1016/j.actamat.2010.02.004 Spierings, 2011, Comparison of density measurement techniques for additive manufactured metallic parts, Rapid Prototyping J, 17, 380, 10.1108/13552541111156504 Puebla, 2012, Effect of melt scan rate on microstructure and macrostructure for electron beam melting of Ti–6Al–4V, Mater Sci Appl, 3, 259 Schwerdtfeger, 2012, In situ flaw detection by IR-imaging during electron beam melting, Rapid Prototyping J, 18, 259, 10.1108/13552541211231572 Zäh, 2010, Modelling and simulation of electron beam melting, Prod Eng Res Dev, 4, 15, 10.1007/s11740-009-0197-6 Li, 2006, Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping, J Mater Sci, 41, 7886, 10.1007/s10853-006-0948-0 King, 2014, Modeling and simulation of metal additive manufacturing for accelerated certification Gong, 2014, Melt pool characterization for selective laser melting of Ti–6Al–4V pre-alloyed powder Kruth, 2004, Selective laser melting of iron-based powder, J Mater Process Technol, 149, 616, 10.1016/j.jmatprotec.2003.11.051 Von Allmen, 1987, 146 Sigl, 2006, Transient physical effects in electron beam sintering, 464 Kong, 2011, High density Ti6Al4V via SLM processing: microstructure and mechanical properties, 475 Murr, 2009, Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications, J Mech Behav Biomed Mater, 2, 20, 10.1016/j.jmbbm.2008.05.004