Elastic flexural–torsional buckling of steel beams with rigid and continuous lateral restraints

Timoshenko, 1961 Trahair, 1977 Weston G., Nethercot D.A.. Continuous composite bridge beams — stability of the steel compression flange in hogging bending. In: Proceedings, ECCS colloquium on stability of plate and shell structures. Ghent University; 1987 Hancock, 1978, Local distortional and lateral buckling of I-beams, Journal of the Structural Division, ASCE, 104, 1787, 10.1061/JSDEAG.0005035 Trahair, 2003, Out-of-plane advanced analysis of steel structures, Engineering Structures, 25, 1627, 10.1016/S0141-0296(03)00134-2 Linder, 1997, Design of steel beams and beam columns, Thin-walled Structures, 19, 378 Kitipornchai, 1975, Elastic behavior of tapered monosymmetric I-beams under moment gradient, Journal of the Structural Division, ASCE, 101, 1661, 10.1061/JSDEAG.0004130 Pi, 1992, Prebuckling. Deflections and lateral buckling. I: Theory, Journal of Structural Engineering, ASCE, 118, 2949, 10.1061/(ASCE)0733-9445(1992)118:11(2949) Hancock, 1978, Finite element analysis of lateral buckling of continuously restrained beam–columns, Civil Engineering Transations, Institution of Engineering, Australia, CE20, 120 Bradford, 1997, Generalized elastic buckling of restrained I Beams by FEM, Journal of Structural Engineering, ASCE, 123, 1631, 10.1061/(ASCE)0733-9445(1997)123:12(1631) Bradford, 1997, Lateral-distortional buckling of continuously restrained columns, Journal of Constructional Steel Research, 42, 121, 10.1016/S0143-974X(97)00023-0 Vrcelj, 2006, Elastic distortional of continuously restrained I-section beam–columns, Journal of Constructional Steel Research, 62, 223, 10.1016/j.jcsr.2005.07.014 Bradford, 1998, Inelastic buckling of I-beams with continuous elastic tension flange restraint, Journal of Constructional Steel Research, 48, 63, 10.1016/S0143-974X(98)90195-X Nethercot, 1976, Lateral buckling approximations for elastic beams, The structural Engineer, 54, 197 Trahair, 1993 Tong, 2003, A general theory for the flexural-torsional buckling of thin-walled members I: Energy Method, Advances in Structural Engineering, 6, 293, 10.1260/136943303322771673 Tong, 2003, A general theory for the flexural-torsional buckling of thin-walled members I: Fictitious load method, Advances in Structural Engineering, 6, 299, 10.1260/136943303322771682 Galéa, 2003, Moment critique de déversement élastique de poutre fléchies — Présentation du logiciel LTBEAM. Revue Construction Métallique, CTICM Larue B, Khelil A., Gueury M.. Evaluation of the lateral-torsional buckling of the I beam section continuously restrained along a flange by the study of the buckling of an isolated equivalent profile. Engineering Structures 2006 [submitted for publication] Larue B.. Ph.D. thesis. Université Henri Poincaré Nancy 1; 2005 Eurocode 3, Design of Steel Structures-part 1-1. General rules and rules for buildings. prEN1993-1-1:2003, Stage 34. Draft. Brussels (Belgium): European Committee for Standardisation; 2003 XP P22-311–Décembre 1992 - Eurocode 3–Calcul des structures en acier et Document d’Application Nationale–Partie 1.1: Règles générales et règles pour les bâtiments