A model for cutting forces generated during machining with self-propelled rotary tools

Shaw, 1952, The rotary cutting tool, Transactions of the ASME, 1065 V. Karri, Fundamental studies of rotary tool cutting processes, Ph.D. thesis, University of Melbourne, 1991. Armarego, 1993, Computer-aided predictive models for fundamental rotary tool cutting processes, Annals of the CIRP, 42/1, 49, 10.1016/S0007-8506(07)62389-0 Armarego, 1994, Fundamental studies of driven and self-propelled rotary tool cutting process—II. Experimental investigation, International Journal of Machine Tools & Manufacture, 34, 803, 10.1016/0890-6955(94)90060-4 Armarego, 1997, Predictive cutting model for forces and power in self-propelled rotary tool turning operations, Annals of the CIRP, 46/1, 19, 10.1016/S0007-8506(07)60767-7 Kishawy, 2001 Shuting Lei, 2002, High-speed machining of titanium alloys using the driven rotary tools, International Journal of Machine Tools & Manufacture, 42, 653, 10.1016/S0890-6955(02)00012-3 Chen, 1992, High-performance machining of SiC whisker-reinforced aluminium composite by self-propelled rotary tools, CIRP, STC C, 41/1, 59 Kishawy, 2003, Tool wear and chip formation during hard turning with self-propelled rotary tools, International Journal of Machine Tools and Manufacture, 43/4, 433, 10.1016/S0890-6955(02)00239-0 Kishawy, 2004, Tool performance and attainable surface quality during the machining of aerospace alloys using self-propelled rotary tools, Journal of Materials Processing Technology, 152/3, 266, 10.1016/j.jmatprotec.2003.11.011 Zhang, 2003 H.A. Kishawy, A.G. Gerber, A model for the tool temperature during machining with a rotary tool, ASME International Mechanical Engineering, Congress and Exposition, New York, NY, IMECE2001/MED-23312, 2001, pp. 1–8. H.A. Kishawy, L. Li, A.I. EL-Wahab, Prediction of chip flow direction during machining with self-propelled rotary, International Journal of Machine Tool and Manufacture, 2005, accepted for publication. Oxley, 1989, The mechanics of machining: an analytical approach to assessing machinability, Ellis Horwood Limited, 136 Armarego, 1969 Stabler, 1964 Lin, 1982, Predicting cutting forces for oblique machining conditions, Proceedings of the Institute of Mechanical Engineers, 196, 141, 10.1243/PIME_PROC_1982_196_015_02 Hastings, 1980, A machining theory for predicting chip geometry cutting forces etc. from work material properties and cutting conditions, Proceedings of Royal Society A, 371, 569, 10.1098/rspa.1980.0097 Oxley, 1963 Young, 1987, Allowing for nose radius effect in predicting the chip flow direction and cutting forces in bar turning, Proceedings of the Institute of Mechanical Engineers, 201, 213, 10.1243/PIME_PROC_1987_201_108_02 Wang, 2001, Development of a chip flow model for turning operations, International Journal of Machine Tool and Manufacture, 41, 1265, 10.1016/S0890-6955(01)00022-0 Shaw, 2005