Modeling of the HESCO nozzle diffuser used in IEA Annex-20 experiment test room

Nielsen PV. Flow in air conditioned rooms, Ph.D. Thesis, Technical University of Denmark, 1974. Chen, 1995, Comparison of different k–ε models for indoor air flow computations, Numerical Heat Transfer Part B, 28, 353, 10.1080/10407799508928838 Chen, 1996, Prediction of room air motion by Reynolds-stress models, Building and Environment, 31, 233, 10.1016/0360-1323(95)00049-6 Fontaine, 1994, Analysis of a three dimensional ventilation flow: experimental validation on a waters scale model of numerical simulations, Numerical Heat Transfer Part A, 26, 431, 10.1080/10407789408956002 Murakami, 1989, Numerical and experimental study on room airflow—3-D predictions using the k–ε turbulence model, Building and Environment, 24, 85, 10.1016/0360-1323(89)90019-X Nielsen, 1978, The velocity characteristics of ventilated rooms, Journal of Fluids Engineering, 100, 291, 10.1115/1.3448669 Nielsen, 1979, Buoyancy-affected flows in ventilated rooms, Numerical Heat Transfer, 2, 115, 10.1080/10407787908913402 Nielsen, 1992, Description of supply openings in numerical models for room air distribution, ASHRAE Transactions, 98, 963 Nielsen PV. The box method—a practical procedure for introduction of an air supply device in CFD calculation. Institute for Bygningsteknik, Aalborg University, 1997. Chen Q, Srebric J. Simplified diffuser boundary conditions for numerical room airflow models. ASHRAE RP-1009, 2000. Lemaire AD. Annex-20 air flow patterns within buildings: room air and contaminant flow, evaluation of computational methods—Subtask-1 Summary Report. TNO Building and Construction Research, 1993. Peng SH. Modeling of turbulent flow and heat transfer for building ventilation. Ph.D. Thesis, Chalmers University of Technology, 1998. Heikkinen J. Modeling of supply air terminal for room air flow simulation. Proceedings of 12th AIVC Conference, Ottawa, Canada, September 24–27, 1991. Ewert M, Renz U, Vogl N, Zeller M. Definition of the flow parameters at the room inlet devices—measurements and calculations. Proceedings of 12th AIVC Conference, Ottawa, Canada, September 24–27, 1991. Skovgaard M, Nielsen PV. Modeling complex geometries in CFD—applied to air flow in ventilated rooms, Proceedings of 12th AIVC Conference, Ottawa, Canada, September 24–27, 1991. Emvin P, Davidson L. A numerical comparison of three inlet approximations of the diffuser in case E1 Annex 20. Fifth International Conference on Air Distributions in Rooms, ROOMVENT’96, Yokohama, Japan, vol. 1, 1996, pp. 219–26. Buchanan CR. CFD Characterization of a mechanically ventilated office room: The effects of room design on ventilation performance. Ph.D. thesis, University of California, 1997. Djunaedy, 2001, Development of a simplified technique of modeling four-way ceiling air supply diffuser, Building and Environment, 37, 393, 10.1016/S0360-1323(01)00038-5 Loomans MGLC. The measurement and simulation of indoor air flow. Ph.D. Thesis, Eindhoven University of Technology, 1998. Gibson, 1978, Ground effects on pressure fluctuations in the atmospheric boundary layer, Journal of Fluid Mechanics, 86, 491, 10.1017/S0022112078001251 Launder, 1975, Progress in the development of a Reynolds-stress turbulence closure, Journal of Fluid Mechanics, 68, 537, 10.1017/S0022112075001814 Fluent Inc. Fluent 6 user manual. 6-58-72, 10-1-102. 2001. Gan, 1998, Prediction of turbulent buoyant flow using an RNG k–ε model, Numerical Heat Transfer Part A, 33, 169, 10.1080/10407789808913933 Versteeg HK, Malalasekera W. Introduction to computational fluid dynamics. New York: Longman Group Ltd.; 1995. Awbi, 1989, Application of computational fluid dynamics in room ventilation, Building and Environment, 24, 73, 10.1016/0360-1323(89)90018-8 Zhang, 2000, Test room for validation of airflow patterns estimated by computational fluid dynamics, Journal of Agricultural Engineering Research, 76, 141, 10.1006/jaer.2000.0538 Chen, 1992, Significant questions in predicting room air motion, ASHRAE Transactions: Symposia Part I, 98, 929