Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities

2008 Solomon S, Plattner GK, Knutti R, Friedlingstein P. Irreversible climate change due to carbon dioxide emissions. In: Proceeding of the National Academy of Sciences of the United States of America; 2009.106 (6) p. 1704–1709. Mahashabde, 2011, Assessing the environmental impacts of aircraft noise and emissions, Progress in Aerospace Sciences, 47, 15, 10.1016/j.paerosci.2010.04.003 Lee, 2009, Aviation and global climate change in the 21st century, Atmospheric Environment, 43, 3520, 10.1016/j.atmosenv.2009.04.024 Boucher, 2011, Atmospheric science: seeing through contrails, Nature Climate Change, 1, 24, 10.1038/nclimate1078 Lee, 2010, Can we accelerate the improvement of energy efficiency in aircraft systems?, Energy Conversion and Management, 51, 189, 10.1016/j.enconman.2009.09.011 Lawrence P. Meeting the challenge of aviation emissions: an aircraft industry perspective. Technology Analysis and Strategic Management; 2009. 21 (1) p. 79–92. Mangalgiri, 1999, Composite materials for aerospace applications, Bulletin of Materials Science, 22, 657, 10.1007/BF02749982 Soutis, 2005, Carbon fiber reinforced plastics in aircraft construction, Materials Science and Engineering A, 412, 171, 10.1016/j.msea.2005.08.064 Edwards, 2008, Composite materials revolutionise aerospace engineering, Ingenia, 36, 24 Hale, 2006, Boeing 787 from the ground up, Aero Magazine Boeing, 24, 17 Baker, 2004 Soutis, 2005, Fibre reinforced composites in aircraft construction, Progress in Aerospace Sciences, 41, 143, 10.1016/j.paerosci.2005.02.004 Hinrichsen, 2001, The challenge of reducing both airframe weight and manufacturing cost, Air & Space Europe, 3, 119, 10.1016/S1290-0958(01)90072-3 Frank, 2012, Carbon fibers: precursors, manufacturing, and properties, Macromolecular Materials and Engineering, 297, 493, 10.1002/mame.201100406 Kiskan, 2011, Polybenzoxazine-based composites as high-performance materials, Polymer International, 60, 167, 10.1002/pi.2961 Bibo, 1998, Carbon-fibre non-crimp fabric laminates for cost-effective damage-tolerant structures, Composites Science and Technology, 58, 129, 10.1016/S0266-3538(97)00106-1 Brandt, 1996, Mechanical performance of composites based on various three-dimensional woven-fibre preforms, Composites Science and Technology, 56, 381, 10.1016/0266-3538(95)00135-2 Lukaszewicz DHJA, 2012, The engineering aspects of automated pre-preg layup: history, present and future, Composites Part B Engineering, 43, 997, 10.1016/j.compositesb.2011.12.003 Noor, 2000, Structures technology for future aerospace systems, Computers & Structures, 74, 507, 10.1016/S0045-7949(99)00067-X Bannister, 2001, Challenges for composites into the next millennium—a reinforcement perspective, Composites Part A Applied Science and Manufacturing, 32, 901, 10.1016/S1359-835X(01)00008-2 Barbero, 2011 Soden, 2004, Recommendations for designers and researchers resulting from the world-wide failure exercise, Composites Science and Technology, 64, 589, 10.1016/S0266-3538(03)00228-8 Echaabi, 1996, Review of failure criteria of fibrous composite materials, Polymer Composites, 17, 786, 10.1002/pc.10671 Orifici, 2008, Review of methodologies for composite material modelling incorporating failure, Composite Structures, 86, 194, 10.1016/j.compstruct.2008.03.007 Catalanotti, 2013, Three-dimensional failure criteria for fiber-reinforced laminates, Composite Structures, 95, 63, 10.1016/j.compstruct.2012.07.016 Scida, 1999, A micromechanics model for 3D elasticity and failure of woven-fibre composite materials, Composites Science and Technology, 59, 505, 10.1016/S0266-3538(98)00096-7 Daniel, 2011, Strain-rate-dependent failure criteria for composites, Composites Science and Technology, 71, 357, 10.1016/j.compscitech.2010.11.028 Selzer, 1997, Mechanical properties and failure behaviour of carbon fibre-reinforced polymer composites under the influence of moisture, Composites Part A Applied Science and Manufacturing, 28, 595, 10.1016/S1359-835X(96)00154-6 LLorca, 2011, Multiscale modeling of composite materials: a roadmap towards virtual testing, Advanced Materials, 23, 5130, 10.1002/adma.201101683 Spearing, 1998, On the role of length-scale in the prediction of failure of composite structures: assessment and needs, Applied Composite Materials, 5, 139, 10.1023/A:1008876701815 Aviation Safety: Status of FAA's actions to oversee the safety of composite airplanes. US Government Accountability of Office report: GAO-11-849; September 2011. Lucintel: Global composites quarterly market analysis Q4 2009–Q4 2012. Market reports on composites; December 2011. Mason, 2006, Non-destructive inspection broadens its scope, High Performance Composites Wood, 2008, In-situ composite repair builds on basics, High Performance Composites Bazargan, 2010 Cantwell, 1992, The significance of damage and defects and their detection in composite materials: a review, The Journal of Strain Analysis for Engineering Design, 27, 29, 10.1243/03093247V271029 Shyr, 2003, Impact resistance and damage characteristics of composite laminates, Composite Structures, 62, 193, 10.1016/S0263-8223(03)00114-4 Davies, 1995, Impact damage prediction in carbon composite structures, International Journal of Impact Engineering, 16, 149, 10.1016/0734-743X(94)00039-Y Richardson, 1996, Review of low-velocity impact properties of composite materials, Composites Part A Applied Science and Manufacturing, 27, 1123, 10.1016/1359-835X(96)00074-7 Abrate, 1991, Impact on laminated composite materials, Applied Mechanics Reviews, 44, 155, 10.1115/1.3119500 Prichard, 1990, The role of impact damage in post-impact compression testing, Composites, 21, 503, 10.1016/0010-4361(90)90423-T Kumar, 1993, Delaminations of barely visible impact damage in CFRP laminates, Composite Structures, 23, 313, 10.1016/0263-8223(93)90231-E Polimeno, 2009, Detecting barely visible impact damage detection on aircraft composites structures, Composite Structures, 91, 398, 10.1016/j.compstruct.2009.04.014 Armstrong, 2005 Soutis C, Hu FZ. Design and performance of bonded patch repairs of composite structures. In: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering; 1997. 211(4) p. 263–271. Camanho, 2006, A design methodology for mechanically fastened joints in laminated composite materials, Composites Science and Technology, 66, 3004, 10.1016/j.compscitech.2006.02.017 Camanho, 1999, A progressive damage model for mechanically fastened joints in composite laminates, Journal of Composite Materials, 33, 2248, 10.1177/002199839903302402 Wang, 2009, Optimum shapes of scarf repairs, Composites Part A Applied Science and Manufacturing, 40, 1407, 10.1016/j.compositesa.2009.02.009 Charalambides, 1998, Adhesively-bonded repairs to fibre-composite materials I. Experimental, Composites Part A Applied Science and Manufacturing, 29, 1371, 10.1016/S1359-835X(98)00060-8 Gunnion, 2006, Parametric study of scarf joints in composite structures, Composite Structures, 75, 364, 10.1016/j.compstruct.2006.04.053 Gardiner, 2011, Primary structural repair: the quest for quality, High Performance Composites Lucintel: Growth opportunities for composites in aerospace MRO market 2011–2016: Trends, forecast and opportunity analysis. Market reports on composites; October 2011. Banea MD, da Silva LFM.. Adhesively bonded joints in composite materials: an overview. In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications; 2009. 223(1) p. 1–18. Baker, 1999, Bonded composite repair of fatigue-cracked primary aircraft structure, Composite Structures, 47, 431, 10.1016/S0263-8223(00)00011-8 Soutis, 1999, Compressive behaviour of CFRP laminates repaired with adhesively bonded external patches, Composite Structures, 45, 289, 10.1016/S0263-8223(99)00033-1 RDSG, 2005, Modelling single and double-lap repairs on composite materials, Composites Science and Technology, 65, 1948, 10.1016/j.compscitech.2005.04.007 Whittingham, 2009, Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structure, Composites Part A Applied Science and Manufacturing, 40, 1419, 10.1016/j.compositesa.2008.12.011 Latorella, 2000, A review of human error in aviation maintenance and inspection, International Journal of Industrial Ergonomics, 26, 133, 10.1016/S0169-8141(99)00063-3 Scott, 1982, A review of non-destructive testing of composite materials, NDT International, 15, 75, 10.1016/0308-9126(82)90001-3 Teagle, 1983, The quality control and non-destructive evaluation of composite aerospace components, Composites, 14, 115, 10.1016/S0010-4361(83)80007-X 1987, Volume 1 1990, Volume 2 Baaren J. Study on visual inspection of composite structures. European Aviation Safety Agency, EASA report 2007/3; 2009. Hsu DK, Peters JJ, Fei D, Barnard DJ, Dayal V. Imaging of flaws in composite honeycomb aircraft structures using instrumented tap test. In: Proceeding of SPIE, non-destructive evaluation of aging materials and composites III. Volume 3585, 236: 8 February; 1999. Roach, 2008, Assessing conventional and advanced NDI for composite aircraft, High Performance Composites Blitz, 1996 Garnier, 2011, The detection of aeronautical defects in situ on composite structures using non-destructive testing, Composite Structures, 93, 1328, 10.1016/j.compstruct.2010.10.017 Castaings, 1998, Single-sided inspection of composite materials using air-coupled ultrasound, Journal of Nondestructive Evaluation, 17, 37, 10.1023/A:1022632513303 Cawley, 1994, The rapid non-destructive inspection of large composite structures, Composites, 25, 351, 10.1016/S0010-4361(94)80005-7 Dubois, 2011, Evolution of industrial laser-ultrasonic systems for the inspection of composites, Nondestructive Testing and Evaluation, 26, 213, 10.1080/10589759.2011.573552 Blouin, 2010, Applications of laser tapping and laser ultrasonics to aerospace composite structures, Insight, 52, 130, 10.1784/insi.2010.52.3.130 Davies, 1993, Laser-generated ultrasound: its properties, mechanisms and multifarious applications, Journal of Physics D: Applied Physics, 26, 329, 10.1088/0022-3727/26/3/001 Monchalin, 1985, Optical detection of ultrasound at a distance using a confocal Fabry–Perot interferometer, Applied Physics Letters, 47, 14, 10.1063/1.96411 Avdelidis, 2003, Transient thermography in the assessment of defects of aircraft composites, NDT & E International, 36, 433, 10.1016/S0963-8695(03)00052-5 Hung, 2009, Review and comparison of shearography and active thermography for nondestructive evaluation, Materials Science and Engineering, 64, 73, 10.1016/j.mser.2008.11.001 Almond, 2001, Thermal imaging of composites, Journal of Microscopy, 201, 163, 10.1046/j.1365-2818.2001.00762.x Avdelidis, 2004, Aircraft composites assessment by means of transient thermal NDT, Progress in Aerospace Sciences, 40, 143, 10.1016/j.paerosci.2004.03.001 Krishnapillai, 2005, Thermography as a tool for damage assessment, Composite Structures, 67, 149, 10.1016/j.compstruct.2004.09.015 Genest, 2009, Pulsed thermography for non-destructive evaluation and damage growth monitoring of bonded repairs, Composite Structures, 88, 112, 10.1016/j.compstruct.2008.02.010 Hung, 1999, Applications of digital shearography for testing of composite structures, Composites Part B Engineering, 30, 765, 10.1016/S1359-8368(99)00027-X Steinchen W, Yang L, Kupfer G, Mackel P. Non-destructive testing of aerospace composite materials using digital shearography. In: Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering; 1998.212(G1) p. 21–30. Gryzagoridis, 2010, Impact damage detection on composites using optical NDT techniques, Insight, 52, 248, 10.1784/insi.2010.52.5.248 Ruzek, 2006, Ultrasonic C-Scan and shearography NDI techniques evaluation of impact defects identification, NDT & E International, 39, 132, 10.1016/j.ndteint.2005.07.012 Hung, 2000, Evaluating the soundness of bonding using shearography, Composite Structures, 50, 353, 10.1016/S0263-8223(00)00109-4 Gryzagoridis, 2008, Benchmarking shearographic NDT for composites, Insight, 50, 249, 10.1784/insi.2008.50.5.249 Sloan, 2010, Machining carbon composites: risky business, High Performance Composites Sheikh-Ahmad, 2009 Koplev, 1983, The cutting process, chips, and cutting forces in machining CFRP, Composites, 14, 371, 10.1016/0010-4361(83)90157-X König, 1985, Machining of fibre reinforced plastics, CIRP Annals—Manufacturing Technology, 34, 537, 10.1016/S0007-8506(07)60186-3 Mason, 2005, The craft of aircraft repair, High Performance Composites Bhatnagar, 1995, On the machining of fibre reinforced plastic (FRP) composite laminates, International Journal of Machine Tools & Manufacture, 35, 701, 10.1016/0890-6955(95)93039-9 Ferreira, 1999, Machining optimisation in carbon fibre reinforced composite materials, Journal of Materials Processing Technology, 92, 135, 10.1016/S0924-0136(99)00221-6 Westerman EA, Roll PE. Mechanical scarfing apparatus. US Patent 4987,700; January 1991. Westerman EA, Roll PE. Scarfing apparatus. US Patent 5207,541; May 1993. Dubey, 2008, Laser beam machining—a review, International Journal of Machine Tools & Manufacture, 48, 609, 10.1016/j.ijmachtools.2007.10.017 Völkermeyer, 2011, Laser-based approach for bonded repair of carbon fiber reinforced plastics, Physics Procedia, 12, 537, 10.1016/j.phpro.2011.03.066 Fischer, 2010, Laser-based repair of carbon fiber reinforced plastics, CIRP Annals—Manufacturing Technology, 59, 203, 10.1016/j.cirp.2010.03.075 Goeke, 2010, Influence of laser cutting parameters on CFRP part quality, Physics Procedia, 5, 253, 10.1016/j.phpro.2010.08.051 Herzog, 2008, Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP, International Journal of Machine Tools & Manufacture, 48, 1464, 10.1016/j.ijmachtools.2008.04.007 Mathew, 1999, Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites, Journal of Materials Processing Technology, 89, 198, 10.1016/S0924-0136(99)00011-4 Cenna, 2002, Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials, International Journal of Machine Tools & Manufacture, 42, 105, 10.1016/S0890-6955(01)00090-6 Haferkamp, 1998, Air contaminants generated during laser processing of organic materials and protective measures, Journal of Applied Laser Applications, 10, 109, 10.2351/1.521835 Momber, 1998 Hocheng, 1997, Feasibility study of abrasive waterjet milling of fibre-reinforced plastics, Transaction of the ASME, the Journal of Manufacturing Science and Engineering, 119, 133, 10.1115/1.2831088 Arola, 1994, Micro-mechanisms of material removal in abrasive waterjet machining, Processing of Advanced Materials, 4, 37 Ramulu, 1993, Water jet and abrasive water jet cutting of unidirectional graphite/epoxy composite, Composites, 24, 299, 10.1016/0010-4361(93)90040-F Shanmugam, 2002, Comparative study of jetting machining technologies over laser machining technology for cutting composite materials, Composite Structures, 57, 289, 10.1016/S0263-8223(02)00096-X Dunsky C, Tacheron P, Hashish M. Waterjet techniques for composite material jet engine component repair—phase 1. Technical report, defense technical information center; 1996. Shanmugam, 2008, A study of delamination on graphite/epoxy composites in abrasive waterjet machining, Composites Part A Applied Science and Manufacturing, 39, 923, 10.1016/j.compositesa.2008.04.001 Kinloch, 1987 2011 Baldan, 2004, Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pre-treatment, Journal of Materials Science, 39, 1, 10.1023/B:JMSC.0000007726.58758.e4 Awaja, 2009, Adhesion of polymers, Progress in Polymer Science, 34, 948, 10.1016/j.progpolymsci.2009.04.007 Baldan, 2012, Adhesion phenomena in bonded joints, International Journal of Adhesion and Adhesives, 38, 95, 10.1016/j.ijadhadh.2012.04.007 Fourche, 1995, An overview of the basic aspects of polymer adhesion. Part I: Fundamentals, Polymer Engineering & Science, 35, 957, 10.1002/pen.760351202 Kendall, 1971, The adhesion and surface energy of elastic solids, Journal of Physics D: Applied Physics, 4, 1186, 10.1088/0022-3727/4/8/320 Fourche, 1995, An overview of the basic aspects of polymer adhesion. Part II: Application to surface treatments, Polymer Engineering & Science, 35, 968, 10.1002/pen.760351203 Wingfield, 1993, Treatment of composite surfaces for adhesive bonding, International Journal of Adhesion and Adhesives, 13, 151, 10.1016/0143-7496(93)90036-9 Liston, 1993, Plasma surface modification of polymers for improved adhesion: a critical review, Journal of Adhesion Science and Technology, 7, 1091, 10.1163/156856193X00600 Liston, 1989, Plasma treatment for improved bonding—a review, The Journal of Adhesion, 30, 199, 10.1080/00218468908048206 Leahy, 2001, Plasma surface treatment of aerospace materials for enhanced adhesive bonding, The Journal of Adhesion, 77, 215, 10.1080/00218460108030739 Chan, 1996, Polymer surface modification by plasmas and photons, Surface Science Reports, 24, 1, 10.1016/0167-5729(96)80003-3 Shanahan, 1996, Effects of plasma treatment on the adhesion of an epoxy composite, International Journal of Adhesion and Adhesives, 16, 129, 10.1016/0143-7496(95)00028-3 Kim, 2003, Investigation of optimal surface treatments for carbon/epoxy composite adhesive joints, The Journal of Adhesion Science and Technology, 17, 329, 10.1163/156856103762864651 Katnam, 2011, Characterising pre-preg and non-crimp-fabric composite single lap bonded joints, International Journal of Adhesion and Adhesives, 31, 679, 10.1016/j.ijadhadh.2011.06.013 Comer, 2013, Characterising the behaviour of composite single lap bonded joints using digital image correlation, International Journal of Adhesion and Adhesives, 40, 215, 10.1016/j.ijadhadh.2012.08.010 Schutze, 1998, The atmospheric-pressure plasma jet: a review and comparison to other plasma sources, IEEE Transactions on Plasma Science, 26, 1685, 10.1109/27.747887 Canal, 2004, Wettability, ageing and recovery process of plasma-treated polyamide 6, Journal of Adhesion Science and Technology, 18, 1077, 10.1163/1568561041257487 Lippert, 2005, Interaction of photons with polymers: from surface modification to ablation, Plasma Processes and Polymers, 2, 525, 10.1002/ppap.200500036 Yao, 2005, Time scale effects in laser material removal: a review, International Journal of Advanced Manufacturing Technology, 26, 598, 10.1007/s00170-003-2026-y Bernard, 2006, Surface treatment of carbon/epoxy and glass/epoxy composites with an excimer laser beam, International Journal of Adhesion and Adhesives, 26, 543, 10.1016/j.ijadhadh.2005.07.008 Buchman, 1994, Laser-induced adhesion enhancement of polymer composites and metal alloys, Journal of Adhesion Science and Technology, 18, 1211, 10.1163/156856194X01031 Rotel, 1995, Preadhesion laser surface treatment of carbon fiber reinforced PEEK composite, The Journal of Adhesion, 55, 77, 10.1080/00218469509342408 Rotel, 2000, Pre-bonding technology based on excimer laser surface treatment, Applied Surface Science, 154, 610, 10.1016/S0169-4332(99)00384-0 Caminero, 2013, Analysis of adhesively bonded repairs in composites: damage detection and prognosis, Composite Structures, 95, 500, 10.1016/j.compstruct.2012.07.028 Wang, 2009, Selection of patch and adhesive materials for helicopter battle damage repair applications, Composite Structures, 91, 278, 10.1016/j.compstruct.2009.04.042 Kohli, 1999, Improved 121°C curing epoxy film adhesive for composite bonding and repair applications: FM 300-2 adhesive system, International Journal of Adhesion and Adhesives, 19, 231, 10.1016/S0143-7496(98)00038-4 Kinard, 2000, Material systems for rapid manufacture of composite structures, Polymer Composites, 21, 918, 10.1002/pc.10245 Gorovaya, 1996, Quick cure of thermosetting composites, Composites Part A Applied Science and Manufacturing, 27A, 953, 10.1016/1359-835X(96)00055-3 Sherwin, 1999, Non-autoclave processing of advanced composite repairs, International Journal of Adhesion and Adhesives, 19, 155, 10.1016/S0143-7496(98)00030-X Stango, 1984, Process-induced residual thermal stresses in advanced fiber-reinforced composite laminates, Journal of Engineering for Industry, 106, 48, 10.1115/1.3185910 Huang, 2005, Influence of processing on warpage of composite parts, Journal of Advanced Materials, 37, 17 White, 1993, Cure cycle optimization for the reduction of processing-induced residual stresses in composite materials, Journal of Composite Materials, 27, 1352, 10.1177/002199839302701402 Grunenfelder, 2010, Void formation in composite pre-pregs—effect of dissolved moisture, Composites Science and Technology, 70, 2304, 10.1016/j.compscitech.2010.09.009 Pearce, 1998, Cause and effect of void formation during vacuum bag curing of epoxy film adhesives, Journal of Adhesion Science and Technology, 12, 567, 10.1163/156856198X00795 Loos, 1983, Curing of epoxy matrix composites, Journal of Composite Materials, 17, 135, 10.1177/002199838301700204 Brostow, 2003, Cure progress in epoxy systems: dependence on temperature and time, Materials Research Innovations, 7, 125, 10.1007/s10019-002-0222-2 Rai, 1997, Optimal cure cycles for the fabrication of thermosetting-matrix composites, Polymer Composites, 18, 566, 10.1002/pc.10309 Olivier, 1998, Optimisation of the co-curing of two different composites with the aim of minimising residual curing stress levels, Composite Science and Technology, 58, 645, 10.1016/S0266-3538(97)00137-1 Yang, 2001, Optimized curing of thick section composite laminates, Materials and Manufacturing Processes, 16, 541, 10.1081/AMP-100108526 Hahn, 1975, Curing stresses in composite laminates, Journal of Composite Materials, 9, 91, 10.1177/002199837500900110 Agius, 2013, Cure behaviour and void development within rapidly cured out-of-autoclave composites, Composites Part B Engineering, 47, 230, 10.1016/j.compositesb.2012.11.020 Eom, 2001, Stress-initiated void formation during cure of a three-dimensionally constrained thermoset resin, Polymer Engineering and Science, 41, 492, 10.1002/pen.10746 Davies, 2007, Effect of cure cycle heat transfer rates on the physical and mechanical properties of an epoxy matrix composite, Composites Science and Technology, 67, 1892, 10.1016/j.compscitech.2006.10.014 Guo, 2005, Temperature field of thick thermoset composite laminates during cure process, Composites Science and Technology, 65, 517, 10.1016/j.compscitech.2004.07.015 Elaldi, 2011, A study on curing processes and environmental effects for rapid composite repair, Journal of Reinforced Plastics and Composites, 30, 749, 10.1177/0731684411403021 Pen, 1989, The effect of matrix shrinkage on damage accumulation in composites, Journal of Composite Materials, 23, 570, 10.1177/002199838902300603 Djokic, 2002, Residual stress development during the composite patch bonding process: measurement and modelling, Composites Part A Applied Science and Manufacturing, 33, 277, 10.1016/S1359-835X(01)00083-5 Rider, 2011, Internal resistance heating for homogeneous curing of adhesively bonded repairs, International Journal of Adhesion and Adhesives, 31, 168, 10.1016/j.ijadhadh.2011.01.001 Singh, 2001, Radiation processing of carbon-reinforced advanced composites, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 185, 50, 10.1016/S0168-583X(01)00753-4 Thostenson, 2001, Microwave and conventional curing of thick-section thermoset composite laminates: experiment and simulation, Polymer Composites, 22, 197, 10.1002/pc.10531 Mahdi, 2003, A comparison of oven-cured and induction-cured adhesively bonded composite joints, Journal of Composite Materials, 37, 519, 10.1177/0021998303037006776 Ramakrishnan, 2000, Curing of composites using internal resistive heating, Journal of Manufacturing Science and Engineering, 122, 124, 10.1115/1.538913 Joseph, 2000, Electrical resistance curing of carbon-fibre/epoxy composites, Composites Science and Technology, 60, 315, 10.1016/S0266-3538(99)00112-8 Chester, 1989, Void minimization in adhesive joints, International Journal of Adhesion and Adhesives, 9, 129, 10.1016/0143-7496(89)90107-3 Tzetzis, 2008, The influence of surface morphology on the interfacial adhesion and fracture behavior of vacuum infused carbon fiber reinforced polymeric repairs, Polymer Composites, 29, 92, 10.1002/pc.20314 Da Silva, 2004, Manufacture of adhesive joints and bulk specimens with high-temperature adhesives, International Journal of Adhesion and Adhesives, 24, 69, 10.1016/S0143-7496(03)00101-5 Newsom CM. Portable vacuum device and method of using same. US Patent 4554,036; November 1985. Kociemba F, Soro D. Equipment for on-site repair of a composite structure with a damaged zone and corresponding method. US Patent 6206,067 B1; March 2001. Kinloch AJ. Adhesives in engineering. In: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 1997. 211 p. 307–335. Godwin, 1980, A review of the strength of joints in fibre-reinforced plastics: Part 1. Mechanically fastened joints, Composites, 11, 155, 10.1016/0010-4361(80)90008-7 Thoppul, 2009, Mechanics of mechanically fastened joints in polymer–matrix composite structures—a review, Composites Science and Technology, 69, 301, 10.1016/j.compscitech.2008.09.037 Van Straalen, 1998, Structural adhesive bonded joints in engineering: drafting design rules, International Journal of Adhesion and Adhesives, 18, 41, 10.1016/S0143-7496(97)00068-7 Davis, 1999, Principles and practices of adhesive bonded structural joints and repairs, International Journal of Adhesion and Adhesives, 19, 91, 10.1016/S0143-7496(98)00026-8 Harman, 2006, Improved design methods for scarf repairs to highly strained composite aircraft structure, Composite Structures, 75, 132, 10.1016/j.compstruct.2006.04.091 Wang, 2008, On the design methodology of scarf repairs to composite laminates, Composites Science and Technology, 68, 35, 10.1016/j.compscitech.2007.05.045 Baker, 1999, Scarf repairs to highly strained graphite/epoxy structure, International Journal of Adhesion and Adhesives, 19, 161, 10.1016/S0143-7496(98)00031-1 Chalkley, 1999, Development of a generic repair joint for certification of bonded composite repairs, International Journal of Adhesion and Adhesives, 19, 121, 10.1016/S0143-7496(98)90028-8 Kimiaeifar, 2012, Reliability analysis of adhesive bonded scarf joints, Engineering Structures, 35, 281, 10.1016/j.engstruct.2011.11.013 Dıaz, 2012, Probabilistic assessment of the structural failure of single-lap bonded joints, International Journal of Adhesion and Adhesives, 37, 70, 10.1016/j.ijadhadh.2012.01.020 Sutherland, 1997, Review of probabilistic models of the strength of composite materials, Reliability Engineering and System Safety, 56, 183, 10.1016/S0951-8320(97)00027-6 Katnam, 2011, Tensile strength of two-part epoxy paste adhesives: Influence of mixing technique and micro-void formation, International Journal of Adhesion and Adhesives, 31, 666, 10.1016/j.ijadhadh.2011.06.005 Adams, 1997, Non-destructive testing of adhesively-bonded joints, NDT & E International, 30, 93, 10.1016/S0963-8695(96)00050-3 Volkersen, 1938, Die Nietkraftverteilung in Zugbeanspruchten Nietverbindungen mit Konstanten Laschenquerschnitten, Luftfahrtforschung, 15, 41 Goland, 1944, The stresses in cemented joints, Journal of Applied Mechanics, 1, A17, 10.1115/1.4009336 Hart-Smith, 1973 Hart-Smith, 1973 Hart-Smith, 1973 Da Silva, 2009, Analytical models of adhesively bonded joints—Part I: Literature survey, International Journal of Adhesion and Adhesives, 29, 319, 10.1016/j.ijadhadh.2008.06.005 Tong, 2003, Adhesive elements for stress analysis of bonded patch to curved thin-walled structures, Computational Mechanics, 30, 143, 10.1007/s00466-002-0374-3 He, 2011, A review of finite element analysis of adhesively bonded joints, International Journal of Adhesion and Adhesives, 31, 248, 10.1016/j.ijadhadh.2011.01.006 Charalambides, 1998, Adhesively-bonded repairs to fibre-composite materials II: Finite element modelling, Composites Part A Applied Science and Manufacturing, 29A, 1383, 10.1016/S1359-835X(98)00061-X MFSF, 2008, Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints, International Journal of Adhesion and Adhesives, 28, 419, 10.1016/j.ijadhadh.2008.04.004 Campilho, 2007, Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model, Journal of Adhesion Science Technology, 21, 855, 10.1163/156856107781061477 Duncan, 2003, Measurements and models for design with modern adhesives, International Journal of Adhesion and Adhesives, 23, 141, 10.1016/S0143-7496(03)00006-X Wang, 2000, Plastic yielding of a film adhesive under multi-axial stresses, International Journal of Adhesion and Adhesives, 20, 155, 10.1016/S0143-7496(99)00033-0 Da Silva, 2005, Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperatures, Journal of Adhesion Science and Technology, 19, 109, 10.1163/1568561053148449 Katnam, 2010, Characterization of moisture-dependent cohesive zone properties for adhesively bonded joints, Engineering Fracture Mechanics, 77, 3105, 10.1016/j.engfracmech.2010.08.023 Katnam, 2012, Investigating tensile behaviour of toughened epoxy paste adhesives using circumferentially notched cylindrical bulk specimens, International Journal of Adhesion and Adhesives, 37, 3, 10.1016/j.ijadhadh.2012.01.007 Kanouté, 2009, Multiscale methods for composites: a review, Archives of Computational Methods in Engineering, 16, 31, 10.1007/s11831-008-9028-8 Stroud, 2002, Probabilistic and possibilistic analyses of the strength of a bonded joint, CMES Computer Modelling in Engineering & Sciences, 3, 755 O'Mahoney, 2013, Taguchi analysis of bonded composite single-lap joints using a combined interface–adhesive damage model, International Journal of Adhesion and Adhesives, 40, 168, 10.1016/j.ijadhadh.2012.06.001 Da Silva, 2009, Teixeira RMS. Development of a computer program for the design of adhesive joints, The Journal of Adhesion, 85, 889, 10.1080/00218460903307761 Marques, 2008, Joint strength optimization of adhesively bonded patches, The Journal of Adhesion, 84, 915, 10.1080/00218460802505275 Da Silva, 2009, Joint strength optimization by the mixed-adhesive technique, International Journal of Adhesion and Adhesives, 29, 509, 10.1016/j.ijadhadh.2008.09.009 Kinloch, 1981, The fracture resistance of a toughened epoxy adhesive, The Journal of Adhesion, 12, 59, 10.1080/00218468108071189 Kinloch, 2003, Toughening structural adhesives via nano- and micro-phase inclusions, The Journal of Adhesion, 79, 867, 10.1080/00218460309551 Da Silva, 2007, Techniques to reduce the peel stresses in adhesive joints with composites, International Journal of Adhesion and Adhesives, 27, 227, 10.1016/j.ijadhadh.2006.04.001 Ashcroft, 2001, The effect of environment on the fatigue of bonded composite joints. Part 1: Testing and fractography, Composites Part A Applied Science and Manufacturing, 32, 45, 10.1016/S1359-835X(00)00131-7 Wahab, 2001, The effect of environment on the fatigue of bonded composite joints. Part 2: Fatigue threshold prediction, Composites Part A Applied Science and Manufacturing, 32, 59, 10.1016/S1359-835X(00)00132-9 Baldan, 2004, Adhesively-bonded joints in metallic alloys, polymers and composite materials: mechanical and environmental durability performance, Journal of Materials Science, 39, 4729, 10.1023/B:JMSC.0000035317.87118.ab Kinloch, 1983 Dessureault, 1997, Observations of fatigue crack initiation and propagation in an epoxy adhesive, International Journal of Adhesion and Adhesives, 17, 183, 10.1016/S0143-7496(96)00044-9 Quaresimin, 2006, Fatigue behaviour and damage evolution of single lap bonded joints in composite material, Composites Science and Technology, 66, 176, 10.1016/j.compscitech.2005.04.026 Crocombe, 1997, Durability modelling concepts and tools for the cohesive environmental degradation of bonded structures, International Journal of Adhesion and Adhesives, 17, 229, 10.1016/S0143-7496(97)00008-0 Wahab, 2001, Diffusion of moisture in adhesively bonded joints, The Journal of Adhesion, 77, 43, 10.1080/00218460108030731 Katnam, 2011, Static and fatigue failures of adhesively bonded laminate joints in moist environments, International Journal of Damage Mechanics, 20, 1217, 10.1177/1056789510395363 Baker, 2011, A proposed approach for certification of bonded composite repairs to flight-critical airframe structure, Applied Composite Materials, 18, 337, 10.1007/s10443-010-9161-z Baker, 2012, Development of a proof test for through-life monitoring of bond integrity in adhesively bonded repairs to aircraft structure, International Journal of Adhesion and Adhesives, 36, 65, 10.1016/j.ijadhadh.2012.03.004 Baker, 2009, Towards a practical structural health monitoring technology for patched cracks in aircraft structure, Composites Part A Applied Science and Manufacturing, 40, 1340, 10.1016/j.compositesa.2008.09.015 Qing, 2006, A real-time active smart patch system for monitoring the integrity of bonded repair on an aircraft structure, Smart Materials and Structures, 15, N66, 10.1088/0964-1726/15/3/N03 Boller, 2000, Next generation structural health monitoring and its integration into aircraft design, International Journal of Systems Science, 31, 1333, 10.1080/00207720050197730 Staszewski, 2009, Health monitoring of aerospace composite structures—active and passive approach, Composites Science and Technology, 69, 1678, 10.1016/j.compscitech.2008.09.034 Diamanti, 2010, Structural health monitoring techniques for aircraft composite structures, Progress in Aerospace Sciences, 46, 342, 10.1016/j.paerosci.2010.05.001 Staszewski, 2002, Intelligent signal processing for damage detection in composite materials, Composites Science and Technology, 62, 941, 10.1016/S0266-3538(02)00008-8 Baker, 2004, Development of life extension strategies for Australian military aircraft, using structural health monitoring of composite repairs and joints, Composite Structures, 66, 133, 10.1016/j.compstruct.2004.04.031 Murayama, 2012, Strain monitoring of a single-lap joint with embedded fiber-optic distributed sensors, Structural Health Monitoring, 11, 325, 10.1177/1475921711419994 Zhao, 2007, Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring, Smart Materials and Structures, 16, 1208, 10.1088/0964-1726/16/4/032 Crocombe, 2002, Investigating fatigue damage evolution in adhesively bonded structures using back-face strain measurement, Journal of Adhesion, 78, 745, 10.1080/00218460213835 Katnam, 2011, The static failure of adhesively bonded metal laminate structures: a cohesive zone approach, Journal of Adhesion Science and Technology, 25, 1131, 10.1163/016942410X537152 Khoramishad, 2010, A generalised damage model for constant amplitude fatigue loading of adhesively bonded joints, International Journal of Adhesion and Adhesives, 30, 513, 10.1016/j.ijadhadh.2010.05.003 Li, 2006, Strain-based health assessment of bonded composite repairs, Composite Structures, 76, 234, 10.1016/j.compstruct.2006.06.032 Jones, 2002, Health monitoring of composite repairs and joints using optical fibres, Composite Structures, 58, 397, 10.1016/S0263-8223(02)00235-0 Li, 2006, Automated characterization of structural disbonds by statistical examination of bond-line strain distribution, Structural Health Monitoring, 5, 83, 10.1177/1475921706057988 Sekine, 2006, Structural health monitoring of cracked aircraft panels repaired with bonded patches using fiber Bragg grating sensors, Applied Composite Materials, 13, 87, 10.1007/s10443-006-9011-1 Majumder, 2008, Fibre Bragg gratings in structural health monitoring—present status and applications, Sensors and Actuators A: Physical, 147, 150, 10.1016/j.sna.2008.04.008 Staszewski, 2004, Structural health monitoring using scanning laser vibrometry. Part I: Lamb wave sensing, Smart Materials and Structures, 13, 251, 10.1088/0964-1726/13/2/002 Mallet, 2004, Structural health monitoring using scanning laser vibrometry. Part II: Lamb waves for damage detection, Smart Materials and Structures, 13, 261, 10.1088/0964-1726/13/2/003 White, 2009, Damage detection in repairs using frequency response techniques, Composite Structures, 87, 175, 10.1016/j.compstruct.2008.05.010 Yam, 2003, Vibration-based damage detection for composite structures using wavelet transform and neural network identification, Composite Structures, 60, 403, 10.1016/S0263-8223(03)00023-0 Kessler, 2002, Damage detection in composite materials using Lamb wave methods, Smart Materials and Structures, 11, 269, 10.1088/0964-1726/11/2/310 Giurgutiu, 2005, Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring, Journal of Intelligent Material Systems and Structures, 16, 291, 10.1177/1045389X05050106 Croxford AJ, Wilcox PD, Drinkwater BW., Konstantinidis. Strategies for guided-wave structural health monitoring. In: Proceedings of the Royal Society A. 2007. 463 p. 2961–2981. Wong, 2006, Can stress waves be used for monitoring sub-surface defects in repaired structures?, Composite Structures, 76, 199, 10.1016/j.compstruct.2006.06.035 Chiu, 2000, Damage detection in bonded repairs using piezoceramics, Smart Materials and Structures, 9, 466, 10.1088/0964-1726/9/4/309 Pavlopoulou, 2012, Non-destructive inspection of adhesively bonded patch repairs using Lamb waves, Plastics, Rubber and Composites, 41, 61, 10.1179/1743289810Y.0000000030 Ihn, 2008, Pitch-catch active sensing methods in structural health monitoring for aircraft structures, Structural Health Monitoring, 7, 5, 10.1177/1475921707081979 Wang, 2007, Group velocity and characteristic wave curves of Lamb waves in composites: modeling and experiments, Composites Science and Technology, 67, 1370, 10.1016/j.compscitech.2006.09.023 Bloss, 2007, Automatically building or repairing composite fibre structures, Assembly Automation, 27, 202, 10.1108/01445150710763213