Adsorptive removal of 2,4-dichlorophenoxyacetic acid (2,4-D) from water with a metal–organic framework

Njoku, 2013, Microwave-assisted preparation of pumpkin seed hull activated carbon and its application for the adsorptive removal of 2,4-dichlorophenoxyacetic acid, Chem. Eng. J., 215–216, 383, 10.1016/j.cej.2012.10.068 Bakhtiary, 2013, Adsorption–desorption behavior of 2,4-D on NCP-modified bentonite and zeolite: implications for slow-release herbicide formulations, Chemosphere, 90, 699, 10.1016/j.chemosphere.2012.09.052 Ding, 2012, Adsorptive removal of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous solutions using MIEX resin, Ind. Eng. Chem. Res., 51, 11226, 10.1021/ie300469h Salman, 2011, Batch and fixed-bed adsorption of 2,4-dichlorophenoxyacetic acid onto oil palm frond activated carbon, Chem. Eng. J., 174, 33, 10.1016/j.cej.2011.08.024 Njoku, 2011, Preparation and characterization of activated carbon from corncob by chemical activation with H3PO4 for 2,4-dichlorophenoxyacetic acid adsorption, Chem. Eng. J., 173, 391, 10.1016/j.cej.2011.07.075 Salman, 2010, Adsorption of 2,4-dichlorophenoxyacetic acid and carbofuran pesticides onto granular activated carbon, Desalination, 256, 129, 10.1016/j.desal.2010.02.002 Hameed, 2009, Adsorption isotherm and kinetic modeling of 2,4-D pesticide on activated carbon derived from date stones, J. Hazard. Mater., 163, 121, 10.1016/j.jhazmat.2008.06.069 Gupta, 2006, Adsorption of 2,4-D and carbofuran pesticides using fertilizer and steel industry wastes, J. Colloid Interface Sci., 299, 556, 10.1016/j.jcis.2006.02.017 Aksu, 2005, Adsorption characteristics of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous solution on powdered activated carbon, J. Environ. Sci. Health B, 40, 545, 10.1081/PFC-200061533 Xi, 2010, Adsorption of the herbicide 2,4-D on organo-palygorskite, Appl. Clay Sci., 49, 255, 10.1016/j.clay.2010.05.015 Li, 2009, Adsorption of herbicides 2,4-D and acetochlor on inorganic–organic bentonites, Appl. Clay Sci., 46, 314, 10.1016/j.clay.2009.08.032 Bakhtiary, 2013, Characterization and 2,4-D adsorption of sepiolite nanofibers modified by N-cetylpyridinium cations, Micropor. Mesopor. Mater., 168, 30, 10.1016/j.micromeso.2012.09.022 Valente, 2009, Adsorption and photocatalytic degradation of phenol and 2,4 dichlorophenoxiacetic acid by Mg–Zn–Al layered double hydroxides, Appl. Catal. B: Environ., 90, 330, 10.1016/j.apcatb.2009.03.019 Chao, 2008, Adsorption of 2,4-D on Mg/Al–NO3 layered double hydroxides with varying layer charge density, Appl. Clay Sci., 40, 193, 10.1016/j.clay.2007.09.003 Ariga, 2012, Nanoarchitectonics for mesoporous materials, Bull. Chem. Soc. Jpn., 85, 1, 10.1246/bcsj.20110162 Vinu, 2006, Carbon nanocage: a large-pore cage-type mesoporous carbon material as an adsorbent for biomolecules, J. Porous Mater., 13, 379, 10.1007/s10934-006-8034-1 Miyahara, 2006, Adsorption study of heme proteins on SBA-15 mesoporous silica with pore-filling models, Thin Solid Films, 499, 13, 10.1016/j.tsf.2005.07.046 Férey, 2008, Hybrid porous solids: past, present, future, Chem. Soc. Rev., 37, 191, 10.1039/B618320B Kitagawa, 2004, Functional porous coordination polymers, Angew. Chem. Int. Ed., 43, 2334, 10.1002/anie.200300610 Yaghi, 2003, Reticular synthesis and the design of new materials, Nature, 423, 705, 10.1038/nature01650 O’keeffe, 2012, Deconstructing the crystal structures of metal organic frameworks and related materials into their underlying nets, Chem. Rev., 112, 675, 10.1021/cr200205j Getman, 2012, Review and analysis of molecular simulations of methane, hydrogen, and acetylene storage in metal_organic frameworks, Chem. Rev., 112, 703, 10.1021/cr200217c Sumida, 2012, Carbon dioxide capture in metal organic frameworks, Chem. Rev., 112, 724, 10.1021/cr2003272 Suh, 2012, Hydrogen storage in metal–organic frameworks, Chem. Rev., 112, 782, 10.1021/cr200274s Wu, 2012, Commensurate adsorption of hydrocarbons and alcohols in microporous metal organic frameworks, Chem. Rev., 112, 836, 10.1021/cr200216x Li, 2012, Metal organic frameworks for separations, Chem. Rev., 112, 869, 10.1021/cr200190s Horcajada, 2012, Metal–organic frameworks in biomedicine, Chem. Rev., 112, 1232, 10.1021/cr200256v Stock, 2012, Synthesis of metal–organic frameworks (MOFs): routes to various MOF topologies, morphologies, and composites, Chem. Rev., 112, 933, 10.1021/cr200304e Jhung, 2012, Analogous porous metal–organic frameworks: synthesis, stability and application in adsorption, CrystEngComm., 14, 7099, 10.1039/c2ce25760b Cychosz, 2009, Enabling cleaner fuels: desulfurization by adsorption to microporous coordination polymers, J. Am. Chem. Soc., 131, 14538, 10.1021/ja906034k Khan, 2012, Remarkable adsorption capacity of CuCl2-loaded porous vanadium benzenedicarboxylate for benzothiophene, Angew. Chem. Int. Ed., 51, 1198, 10.1002/anie.201105113 Khan, 2011, Remarkable adsorptive performance of a metal–organic framework, vanadium-benzenedicarboxylate (MIL-47), for benzothiophene, Chem. Commun., 47, 1306, 10.1039/C0CC04759G Khan, 2012, Adsorptive removal of benzothiophene using porous copper-benzenetricarboxylate loaded with phosphotungstic acid, Fuel Process. Technol., 100, 49, 10.1016/j.fuproc.2012.03.006 Khan, 2012, Low-temperature loading of Cu+ species over porous metal–organic frameworks (MOFs) and adsorptive desulfurization with Cu+-loaded MOFs, J. Hazard. Mater., 237–238, 180, 10.1016/j.jhazmat.2012.08.025 Achmann, 2010, Sulfur removal from low-sulfur gasoline and diesel fuel by metal–organic frameworks, Chem. Eng. Technol., 33, 275, 10.1002/ceat.200900426 Maes, 2011, Selective removal of N-heterocyclic aromatic contaminants from fuels by Lewis acidic metal–organic frameworks, Angew. Chem. Int. Ed., 50, 4210, 10.1002/anie.201100050 Ahmed, 2013, Adsorptive denitrogenation of model fuels with porous metal–organic frameworks (MOFs): effect of acidity and basicity of MOFs, Appl. Catal. B, 129, 123, 10.1016/j.apcatb.2012.09.020 Ahmed, 2013, Adsorptive denitrogenation of model fuels with porous metal–organic framework (MOF) MIL-101 impregnated with phosphotungstic acid: effect of acid site inclusion, J. Hazard. Mater., 250–251, 37, 10.1016/j.jhazmat.2013.01.024 Haque, 2010, Adsorptive removal of methyl orange from aqueous solution with metal–organic frameworks, porous chromium-benzenedicarboxylates, J. Hazard. Mater., 181, 535, 10.1016/j.jhazmat.2010.05.047 Haque, 2011, Adsorptive removal of methyl orange and methylene blue from aqueous solution with a metal–organic framework material, iron terephthalate (MOF-235) J, Hazard. Mater., 185, 507, 10.1016/j.jhazmat.2010.09.035 Huo, 2012, Metal–organic framework MIL-100(Fe) for the adsorption of malachite green from aqueous solution, J. Mater. Chem., 22, 7449, 10.1039/c2jm16513a Chen, 2012, Kinetic and thermodynamic studies on the adsorption of xylenol orange onto MIL-101(Cr), Chem. Eng. J., 183, 60, 10.1016/j.cej.2011.12.021 Jhung, 2007, Microwave synthesis of chromium terephthalate MIL-101 and its benzene sorption ability, Adv. Mater., 19, 121, 10.1002/adma.200601604 Park, 2013, Adsorptive removal of bisphenol-A from water with a metal–organic framework, a porous chromium-benzenedicarboxylate, J. Nanosci. Nanotechnol., 13, 2789, 10.1166/jnn.2013.7411 Zhou, 2013, The removal of bisphenol A from aqueous solutions by MIL-53(Al) and mesostructured MIL-53(Al), J. Colloid Interface Sci., 405, 157, 10.1016/j.jcis.2013.05.024 Hasan, 2012, Adsorptive removal of naproxen and clofibric acid from water using metal–organic frameworks, J. Hazard. Mater., 209–210, 151, 10.1016/j.jhazmat.2012.01.005 Hasan, 2013, Adsorption of naproxen and clofibric acid over a metal–organic framework MIL-101 functionalized with acidic and basic groups, Chem. Eng. J., 219, 537, 10.1016/j.cej.2013.01.002 Serre, 2002, Very large breathing effect in the first nanoporous chromium(III)-based solids: MIL-53 or CrIII(OH).{O2C-C6H4-CO2}.{HO2C-C6H4-CO2H}x⋅H2Oy, J. Am. Chem. Soc., 124, 13519, 10.1021/ja0276974 Serre, 2007, Role of solvent-host interactions that lead to very large swelling of hybrid frameworks, Science, 315, 1828, 10.1126/science.1137975 Hamon, 2009, Comparative study of hydrogen sulfide adsorption in the MIL-53(Al, Cr, Fe), MIL-47(V), MIL-100(Cr), and MIL-101(Cr) metal–organic frameworks at room temperature, J. Am. Chem. Soc., 131, 8775, 10.1021/ja901587t Kang, 2011, Chemical and thermal stability of isotypic metal–organic frameworks: effect of metal ions, Chem. Eur. J., 17, 6437, 10.1002/chem.201100316 Khan, 2010, Phase-transition and phase-selective synthesis of porous chromium-benzenedicarboxylates, Cryst. Growth Des, 10, 1860, 10.1021/cg901562d Haque, 2010, Syntheses of a metal–organic framework material, iron-terephthalate under ultrasound, microwave and conventional electrical heating: a kinetic study, Chem. Eur. J., 16, 1046, 10.1002/chem.200902382 Khan, 2010, Rapid syntheses of a metal–organic framework material Cu3(BTC)2(H2O)3 under microwave: a quantitative analysis of accelerated syntheses, Phys. Chem. Chem. Phys., 12, 2625, 10.1039/b921558a Haque, 2011, Synthesis of isostructural metal–organic frameworks, CPO-27s, with ultrasound, microwave, and conventional heating: effect of synthesis methods and metal ions, Chem. Eng. J., 173, 866, 10.1016/j.cej.2011.08.037 Haque, 2011, Syntheses of metal–organic frameworks and aluminophosphates under microwave heating: a quantitative analysis of accelerations, Cryst. Growth Des., 11, 4413, 10.1021/cg200594e Ho, 2006, Second-order kinetic model for the sorption of cadmium onto tree fern: a comparison of linear and non-linear methods, Water Res., 40, 119, 10.1016/j.watres.2005.10.040 Nouri, 2007, Batch sorption dynamics and equilibrium for the removal of cadmium ions from aqueous phase using wheat bran, J. Hazard. Mater., 149, 115, 10.1016/j.jhazmat.2007.03.055 Hameed, 2008, Removal of phenol from aqueous solutions by adsorption onto activated carbon prepared from biomass material, J. Hazard. Mater., 160, 576, 10.1016/j.jhazmat.2008.03.028 Lin, 2009, Adsorption of phenol and its derivatives from water using synthetic resins and low-cost natural adsorbents: a review, J. Environ. Manage., 90, 1336, 10.1016/j.jenvman.2008.09.003 Weber, 1974, Pore and solid diffusion models for fixed-bed adsorbers, AIChE J., 20, 228, 10.1002/aic.690200204 Önal, 2007, Elucidation of the naproxen sodium adsorption onto activated carbon prepared from waste apricot: kinetic, equilibrium and thermodynamic characterization, J. Hazard. Mater., 148, 727, 10.1016/j.jhazmat.2007.03.037 Liu, 2010, Adsorption behavior of ammonium by a bioadsorbent – Boston ivy leaf powder, J. Environ. Sci., 22, 1513, 10.1016/S1001-0742(09)60282-5 Huang, 2008, Adsorption of Rhodamine B and methyl orange on a hypercrosslinked polymeric adsorbent in aqueous solution, Colloid Surf. A: Physicochem. Eng. Aspects, 330, 55, 10.1016/j.colsurfa.2008.07.050 Ni, 2007, Treatment of methyl orange by calcined layered double hydroxides in aqueous solution: adsorption property and kinetic studies, J. Colloid Interface Sci., 316, 284, 10.1016/j.jcis.2007.07.045 Haque, 2010, Adsorption of phenol on mesoporous carbon CMK-3: effect of textural properties, Bull. Kor. Chem. Soc., 31, 1638, 10.5012/bkcs.2010.31.6.1638 Singh, 2003, Color removal from wastewater using low-Cost activated carbon derived from agricultural waste material, Ind. Eng. Chem. Res., 42, 1965, 10.1021/ie020800d