Progress in understanding structure and transport properties of PEDOT-based materials: A critical review

Park, 1980, Electrical transport in doped polyacetylene, J Chem Phys, 73, 946, 10.1063/1.440214 Park, 1988, Electrical conductivity of highly-oriented-polyacetylene, Solid State Commun, 65, 147, 10.1016/0038-1098(88)90675-8 Heeger, 2001, Semiconducting and metallic polymers: the fourth generation of polymeric materials (nobel lecture), Angew Chemie Int Ed, 40, 2591, 10.1002/1521-3773(20010716)40:14<2591::AID-ANIE2591>3.0.CO;2-0 Jonas, 1997, 3,4-polyethylenedioxythiophene (PEDT): conductive coatings technical applications and properties, Synth Met, 85, 1397, 10.1016/S0379-6779(97)80290-1 Groenendaal, 2000, Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future, Adv Mater, 12, 481, 10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C Wen, 2017, Scientific importance of water-processable PEDOT–PSS and preparation, challenge and new application in sensors of its film electrode: a review, J Polym Sci Part A Polym Chem, 55, 1121, 10.1002/pola.28482 Wei, 2014, A review on PEDOT-based counter electrodes for dye-sensitized solar cells, Int J Energy Res, 38, 1099, 10.1002/er.3178 Ouyang, 2013, “Secondary doping” methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices, Displays, 34, 423, 10.1016/j.displa.2013.08.007 Li, 2017, PEDOT-based thermoelectric nanocomposites – a mini-review, Synth Met, 226, 119, 10.1016/j.synthmet.2017.02.007 Nikolou, 2008, Applications of poly (3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid) transistors in chemical and biological sensors, Chem Rec, 8, 13, 10.1002/tcr.20133 Hui, 2018, Synthesis and electrochemical sensing application of poly(3,4-ethylenedioxythiophene)-based materials: a review, Anal Chim Acta, 1022, 1, 10.1016/j.aca.2018.02.080 Ouyang, 2018, Recent advances of intrinsically conductive polymers, Wuli Huaxue Xuebao/Acta Phys - Chim Sin, 34, 1211, 10.3866/PKU.WHXB201804095 Greczynski, 2001, Photoelectron spectroscopy of thin films of PEDOT – PSS conjugated polymer blend: a mini-review and some new results, J Electron Spectr Relat Phenomena, 121, 1, 10.1016/S0368-2048(01)00323-1 Kirchmeyer, 2005, Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene), J Mater Chem, 15, 2077, 10.1039/b417803n Elschner Andreas, Kirchmeyer Stephan, Lövenich Wilfried, Merker Udo, Reuter Knud. PEDOT principples and applications of an intrinsically conductive polymer; 2011. Rozlosnik, 2009, New directions in medical biosensors employing poly(3,4-ethylenedioxy thiophene) derivative-based electrodes, Anal Bioanal Chem, 395, 637, 10.1007/s00216-009-2981-8 Martin, 2010, The morphology of poly(3,4-ethylenedioxythiophene), Polym Rev, 50, 340, 10.1080/15583724.2010.495440 Yue, 2012, Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: a mini-review, Synth Met, 162, 912, 10.1016/j.synthmet.2012.04.005 Shi, 2015, Effective approaches to improve the electrical conductivity of PEDOT:PSS: a review, Adv Electron Mater, 1, 1500017, 10.1002/aelm.201500017 Sun, 2015, Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices, J Mater Sci Mater Electron, 26, 4438, 10.1007/s10854-015-2895-5 Jonas F, Heywang G, Schmidtberg W. Feststoff-elektrolyte und diese enthaltende elektrolyt-kondensatoren. DE 3814730 A1; 1988. Heywang G, Jonas F, Heinze J, Dietrich M. Neue polythiophene, verfahren zu ihrer herstellung und ihre verwendung. DE 3843412 A1; 1988. Gueye, 2016, Structure and dopant engineering in PEDOT thin films: practical tools for a dramatic conductivity enhancement, Chem Mater, 28, 3462, 10.1021/acs.chemmater.6b01035 Cho, 2014, Single-crystal poly(3,4-ethylenedioxythiophene) nanowires with ultrahigh conductivity, Nano Lett, 14, 3321, 10.1021/nl500748y Wang, 2018, High electrical conductivity and carrier mobility in oCVD PEDOT thin films by engineered crystallization and acid treatment, Sci Adv, 4, eaat5780, 10.1126/sciadv.aat5780 Zhou, 2016, First-principles calculations of thermal, electrical, and thermoelectric transport properties of semiconductors, Semicond Sci Technol, 31, 043001, 10.1088/0268-1242/31/4/043001 Tessler, 2009, Charge transport in disordered organic materials and its relevance to thin-film devices: a tutorial review, Adv Mater, 21, 2741, 10.1002/adma.200803541 Noriega, 2013, A general relationship between disorder, aggregation and charge transport in conjugated polymers, Nat Mater, 12, 1038, 10.1038/nmat3722 Yao, 2015, Charge transport in organic and polymeric semiconductors for flexible and stretchable devices, Adv Mater, 28, 4513, 10.1002/adma.201503007 Wei, 2014, Experimental studies on the anisotropic thermoelectric properties of conducting polymer films, ACS Macro Lett, 3, 948, 10.1021/mz500446z Patel, 2017, Anisotropies and the thermoelectric properties of semiconducting polymers, J Appl Polym Sci, 134, 44403, 10.1002/app.44403 Coropceanu, 2007, Charge transport in organic semiconductors, Chem Rev, 107, 926, 10.1021/cr050140x Anderson, 1958, Absence of diffusion in certain random lattices, Phys Rev, 109, 1492, 10.1103/PhysRev.109.1492 Böhm, 1997, Charge transport in thin organic semiconducting films: seebeck and field effect studies, Phys Status Solidi, 160, 81, 10.1002/1521-396X(199703)160:1<81::AID-PSSA81>3.0.CO;2-S Aleshin, 2010, Charge carrier transport in conducting polymers on the metal side of the metal-insulator transition: a review, Phys Solid State, 52, 2307, 10.1134/S106378341011017X Kaiser, 2001, Electronic transport properties of conducting polymers and carbon nanotubes, Reports Prog Phys, 64, 1, 10.1088/0034-4885/64/1/201 Mott, 1969, Conduction in non-crystalline materials, Philos Mag, 19, 835, 10.1080/14786436908216338 Ihnatsenka, 2015, Understanding hopping transport and thermoelectric properties of conducting polymers, Phys Rev B, 92, 035201, 10.1103/PhysRevB.92.035201 Efros, 1975, Coulomb gap and low temperature conductivity of disordered systems, J Phys C Solid State Phys, 8, 10.1088/0022-3719/8/4/003 Efros, 1987, Influence of electron-electron interaction on hopping conduction of disordered systems, J Non Cryst Solids, 97–98, 31, 10.1016/0022-3093(87)90010-X Sheng, 1973, Hopping conductivity in granular metals, Phys Rev Lett, 31, 44, 10.1103/PhysRevLett.31.44 Sheng, 1980, Fluctuation-induced tunneling conduction in disordered materials, Phys Rev B, 21, 2180, 10.1103/PhysRevB.21.2180 Zuppiroli, 1994, Hopping in disordered conducting polymers, Phys Rev B, 50, 5196, 10.1103/PhysRevB.50.5196 Menon, 1993, Transport in polyaniline near the critical regime of the metal-insulator transition, Phys Rev B, 48, 17685, 10.1103/PhysRevB.48.17685 Ishiguro, 1992, Logarithmic temperature dependence of resistivity in heavily doped conducting polymers at low temperature, Phys Rev Lett, 69, 660, 10.1103/PhysRevLett.69.660 Lee, 2006, Metallic transport in polyaniline, Nature, 441, 65, 10.1038/nature04705 Massonnet, 2015, Metallic behaviour of acid doped highly conductive polymers, Chem Sci, 6, 412, 10.1039/C4SC02463J Farka, 2017, Anderson-localization and the Mott-Ioffe-Regel limit in glassy-metallic PEDOT, Adv Electron Mater, 3, 1700050, 10.1002/aelm.201700050 Kaiser, 1991, Metallic behaviour in highly conducting polymers, Synth Met, 45, 183, 10.1016/0379-6779(91)91802-H Kaiser, 1990, Temperature dependence of conductivity in ‘metallic’ polyacetylene, Synth Met, 36, 367, 10.1016/0379-6779(90)90260-R Ahlskog, 1999, The temperature dependence of the conductivity in the critical regime of the metal - insulator transition in conducting polymers, J Phys Condens Matter, 9, 4145, 10.1088/0953-8984/9/20/014 Kivelson, 1988, Intrinsic conductivity of conducting polymers, Synth Met, 22, 371, 10.1016/0379-6779(88)90108-7 Kaiser, 1987 Mott NF. Metal-insulator transition, 2nd ed. London; 1979. Dufour, 2001, Effect of plasticizing dopants on spectroscopic properties, supramolecular structure, and electrical transport in metallic polyaniline, Chem Mater, 13, 4032, 10.1021/cm001224j Dufour, 2003, Stretchable polyaniline of metallic-type conductivity: role of dopant engineering in the control of polymer supramolecular organization and in the tuning of its properties, Chem Mater, 15, 1587, 10.1021/cm021354n Ahlskog, 1996, Electronic transport in the metallic state of oriented poly(p-phenylenevinylene), Phys Rev B, 53, 15529, 10.1103/PhysRevB.53.15529 Zabrodskii, 1984, Low-temperature conductivity and metal-insulator transition in compensate n-Ge, Sov Phys JETP, 59, 425 Kang, 2017, Charge-transport model for conducting polymers, Nat Mater, 16, 252, 10.1038/nmat4784 Naarmann, 1987, New process for the production of metal-like, stable polyacetylene, Synth Met, 22, 1, 10.1016/0379-6779(87)90564-9 Münstedt, 1988, Ageing of electrically conducting organic materials, Polymer (Guildf), 29, 296, 10.1016/0032-3861(88)90337-0 Roth, 1990, Conducting polymers? Thirteen years of polyacetylene doping, Adv Mater, 2, 356, 10.1002/adma.19900020804 Jonas, 1991, Conductive modifications of polymers with polypyrroles and polythiophenes, Synth Met, 41, 831, 10.1016/0379-6779(91)91506-6 McNeill, 1963, Electronic conduction in polymers. I. The chemical structure of polypyrrole, Aust J Chem, 16, 1056, 10.1071/CH9631056 Bolto, 1963, Electronic conduction in polymers. II. The electrochemical reduction of polypyrrole at controlled potential, Aust J Chem, 16, 1076, 10.1071/CH9631076 Bolto, 1963, Electronic conduction in polymers III. The electronic properties of polypyrrole, Aust J Chem, 16, 1090, 10.1071/CH9631090 Fichou D. Handbook of oligo- and polythiophenes. Weinheim; 1999. Heywang, 1992, Poly(alkylenedioxythiophene)s—new, very stable conducting polymers, Adv Mater, 4, 116, 10.1002/adma.19920040213 Jonas F, Heywang G, Schmidtberg W, Heinze J, Dietrich M. Procédé pour la préparation de Polythiophènes. EP0339340; 1988. Jonas F, Krafft W. Dispersions de polythiophènes nouvelles, leur préparation et leur utilisation. EP0440957; 1990. MacDiarmid, 1994, The concept of secondary doping as applied to polyaniline, Synth Met, 65, 103, 10.1016/0379-6779(94)90171-6 Roncali, 2005, 3,4-Ethylenedioxythiophene (EDOT) as a versatile building block for advanced functional pi-conjugated systems, J Mater Chem, 15, 1589, 10.1039/B415481A Yamamoto, 1999, Synthesis of non-doped poly(3,4-ethylenedioxythiophene) and its spectroscopic data, Synth Met, 100, 237, 10.1016/S0379-6779(99)00005-3 Pei, 1994, Electrochromic and highly stable poly(3,4-ethylenedioxythiophene) switches between opaque blue-black and transparent sky blue, Polymer (Guildf), 35, 1347, 10.1016/0032-3861(94)90332-8 Aleshin, 1997, Electronic transport in doped poly (3,4-ethylenedioxythiophene) near the metal-insulator transition, Synth Met, 90, 61, 10.1016/S0379-6779(97)81227-1 Granström, 1995, Electrically conductive polymer fibres with mesoscopic diameters: 1. Studies of structure and electrical properties, Polymer (Guildf), 36, 2867, 10.1016/0032-3861(95)94335-Q Zotti, 2003, Electrochemical and XPS studies toward the role of monomeric and polymeric sulfonate counterions in the synthesis, composition, and properties of poly(3,4-ethylenedioxythiophene), Macromolecules, 36, 3337, 10.1021/ma021715k Culebras, 2014, Enhanced thermoelectric performance of PEDOT with different counter-ions optimized by chemical reduction, J Mater Chem A, 2, 10109, 10.1039/C4TA01012D Mueller, 2012, Vacuum vapour phase polymerization of high conductivity PEDOT: role of PEG-PPG-PEG, the origin of water, and choice of oxidant, Polymer (Guildf), 53, 2146, 10.1016/j.polymer.2012.03.028 Brooke, 2017, Recent advances in the synthesis of conducting polymers from the vapour phase, Prog Mater Sci, 86, 127, 10.1016/j.pmatsci.2017.01.004 Massonnet, 2014 Jin Bae, 2016, Enhancement of thermoelectric properties of PEDOT:PSS and tellurium-PEDOT:PSS hybrid composites by simple chemical treatment, Sci Rep, 6, 10.1038/srep18805 Hofmann, 2017, How to choose polyelectrolytes for aqueous dispersions of conducting PEDOT complexes, Macromolecules, 50, 1959, 10.1021/acs.macromol.6b02504 de Leeuw, 1994, Electroplating of conductive polymers for the metallization of insulators, Synth Met, 66, 263, 10.1016/0379-6779(94)90076-0 Pettersson, 1998, Spectroscopic ellipsometry studies of the optical properties of doped poly(3,4-ethylenedioxythiophene): an anisotropic metal, Thin Solid Films, 313–314, 356, 10.1016/S0040-6090(97)00846-8 Hohnholz, 2001, Uniform thin films of poly-3,4-ethylenedioxythiophene (PEDOT) prepared by in-situ deposition, Chem Commun, 2444, 10.1039/b107130k Winther-Jensen, 2004, Vapor-phase polymerization of 3,4-ethylenedioxythiophene: a route to highly conducting polymer surface layers, Macromolecules, 37, 4538, 10.1021/ma049864l Lock, 2006, Oxidative chemical vapor deposition of electrically conducting poly(3,4-ethylenedioxythiophene) films, Macromolecules, 39, 5326, 10.1021/ma060113o Kim, 2007, Self-assembly and crystalline growth of poly (3,4-ethylenedioxythiophene) nanofilms, Adv Mater, 19, 3501, 10.1002/adma.200602163 Fabretto, 2010, In-situ QCM-D analysis reveals four distinct stages during vapour phase polymerisation of PEDOT thin films, Polymer (Guildf), 51, 1737, 10.1016/j.polymer.2010.02.019 Winther-Jensen, 2005, Base inhibited oxidative polymerization of 3,4-ethylenedioxythiophene with iron(III)tosylate, Synth Met, 152, 1, 10.1016/j.synthmet.2005.07.085 Howden, 2013, oCVD poly(3,4-ethylenedioxythiophene) conductivity and lifetime enhancement via acid rinse dopant exchange, J Mater Chem A, 1, 1334, 10.1039/C2TA00321J Li, 2014, Effect of attached peroxyacid on liquid phase depositional polymerization of EDOT over PI film with adsorbed ferric chloride, Synth Met, 198, 161, 10.1016/j.synthmet.2014.10.008 Li, 2016, In-situ synthesis of transparent conductive PEDOT coating on PET foil by liquid phase depositional polymerization of EDOT, Synth Met, 217, 185, 10.1016/j.synthmet.2016.03.007 Metsik, 2018, In situ investigation of poly(3,4-ethylenedioxythiophene) film growth during liquid phase deposition polymerization, Thin Solid Films, 653, 274, 10.1016/j.tsf.2018.02.019 Greczynski, 1999, Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy, Thin Solid Films, 354, 129, 10.1016/S0040-6090(99)00422-8 Jönsson, 2003, The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films, Synth Met, 139, 1, 10.1016/S0379-6779(02)01259-6 Lapitan, 2012, In situ scanning tunneling microscopy imaging of electropolymerized poly(3,4-ethylenedioxythiophene) on an iodine-modified Au(1 1 1) single crystal electrode, Electrochim Acta, 62, 433, 10.1016/j.electacta.2011.12.053 Ugur, 2015, Low-dimensional conduction mechanisms in highly conductive and transparent conjugated polymers, Adv Mater, 27, 4604, 10.1002/adma.201502340 Attias, 2017, E1862 V2 Patil, 1988, Optical properties of conducting polymers, Chem Rev, 88, 183, 10.1021/cr00083a009 Gustafsson, 1994, In situ spectroscopic investigations of electrochromism and ion transport in a poly (3,4-ethylenedioxythiophene) electrode in a solid state electrochemical cell, Solid State Ionics, 69, 145, 10.1016/0167-2738(94)90403-0 Bubnova, 2012, Towards polymer-based organic thermoelectric generators, Energy Environ Sci, 5, 9345, 10.1039/c2ee22777k Massonnet, 2014, Improvement of the Seebeck coefficient of PEDOT:PSS by chemical reduction combined with a novel method for its transfer using free-standing thin films, J Mater Chem C Chem C, 2, 1278, 10.1039/C3TC31674B Karabay, 2015, A pure blue to highly transmissive electrochromic polymer based on poly(3,4-propylenedioxyselenophene) with a high optical contrast ratio, Macromolecules, 48, 1352, 10.1021/acs.macromol.5b00022 Gueye, 2017, All-polymeric flexible transparent heaters, ACS Appl Mater Interfaces, 9, 10.1021/acsami.7b08578 Brooke, 2018, Vapor phase synthesized poly(3,4-ethylenedioxythiophene)-trifluoromethanesulfonate as a transparent conductor material, J Mater Chem A, 10.1039/C8TA04744H Crispin, 2003, Conductivity, morphology, interfacial chemistry, and stability of poly (3, 4-ethylene dioxythiophene)–poly (styrene sulfonate): a photoelectron spectroscopy study, J Polym Sci Part B Polym Phys, 41, 2561, 10.1002/polb.10659 Kim, 2002, Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents, Synth Met, 126, 311, 10.1016/S0379-6779(01)00576-8 Crispin, 2006, The origin of the high conductivity of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT- PSS) plastic electrodes, Chem Mater, 18, 4354, 10.1021/cm061032+ Ouyang, 2004, On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment, Polymer (Guildf), 45, 8443, 10.1016/j.polymer.2004.10.001 Nardes, 2008, Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol, Org Electron, 9, 727, 10.1016/j.orgel.2008.05.006 Nardes, 2008, A morphological model for the solvent-enhanced conductivity of PEDOT:PSS thin films, Adv Funct Mater, 18, 865, 10.1002/adfm.200700796 Kim, 2011, Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells, Adv Funct Mater, 21, 1076, 10.1002/adfm.201002290 Worfolk, 2015, Ultrahigh electrical conductivity in solution-sheared polymeric transparent films, Proc Natl Acad Sci, 12, 14138, 10.1073/pnas.1509958112 Lee, 2014, Transparent and flexible organic semiconductor nanofilms with enhanced thermoelectric efficiency, J Mater Chem A, 2, 7288, 10.1039/C4TA00700J Kroon, 2016, Thermoelectric plastics: from design to synthesis, processing and structure–property relationships, Chem Soc Rev, 45, 6147, 10.1039/C6CS00149A Niu, 2018, Understanding the mechanism of PEDOT: PSS modification via solvent on the morphology of perovskite films for efficient solar cells, Synth Met, 243, 17, 10.1016/j.synthmet.2018.05.012 Ouyang, 2015, Imaging the phase separation between PEDOT and polyelectrolytes during processing of highly conductive PEDOT:PSS films, ACS Appl Mater Interfaces, 7, 19764, 10.1021/acsami.5b05439 Döbbelin, 2007, Influence of ionic liquids on the electrical conductivity and morphology of PEDOT:PSS films, Chem Mater, 19, 2147, 10.1021/cm070398z Badre, 2012, Highly conductive poly(3,4-ethylenedioxythiophene): poly (styrenesulfonate) films using 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid, Adv Funct Mater, 22, 2723, 10.1002/adfm.201200225 Fan, 2008, Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films by adding anionic surfactants into polymer solution, Macromolecules, 41, 5971, 10.1021/ma8012459 Xia, 2009, Salt-Induced charge screening and significant conductivity enhancement of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), Macromolecules, 42, 4141, 10.1021/ma900327d De Izarra, 2018, Ionic liquid designed for PEDOT:PSS conductivity enhancement, J Am Chem Soc, 140, 5375, 10.1021/jacs.7b10306 Mazaheripour, 2018, Tailoring the seebeck coefficient of PEDOT:PSS by controlling ion stoichiometry in ionic liquid additives, Chem Mater, 30, 4816, 10.1021/acs.chemmater.8b02114 Wang, 2017, A highly stretchable, transparent, and conductive polymer, Sci Adv, 3, e1602076, 10.1126/sciadv.1602076 Jiang, 2008, Thermoelectric performance of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate), Chin Phys Lett, 25, 2202, 10.1088/0256-307X/25/6/076 Xia, 2010, Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids, ACS Appl Mater Interfaces, 2, 474, 10.1021/am900708x Xia, 2012, Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices, Adv Mater, 24, 2436, 10.1002/adma.201104795 Mukherjee, 2014, Solution-processed poly(3,4-ethylenedioxythiophene) thin films as transparent conductors: effect of p -toluenesulfonic acid in dimethyl sulfoxide, ACS Appl Mater Interfaces, 6, 17792, 10.1021/am504150n Kim, 2014, Highly conductive PEDOT:PSS nanofibrils induced by solution-processed crystallization, Adv Mater, 26, 2268, 10.1002/adma.201304611 Kim, 2015, Highly conductive all-plastic electrodes fabricated using a novel chemically controlled transfer-printing method, Adv Mater, 27, 2317, 10.1002/adma.201500078 Meng, 2015, Conductivity enhancement of PEDOT:PSS films via phosphoric acid treatment for flexible all-plastic solar cells, ACS Appl Mater Interfaces, 7, 14089, 10.1021/acsami.5b03309 Kumar, 2016, Enhanced high temperature thermoelectric response of sulphuric acid treated conducting polymer thin films, J Mater Chem C, 4, 215, 10.1039/C5TC03145A Naujoks, 2009, Microscopical investigations of PEDOT : PSS thin films, Adv Funct Mater, 19, 1215, 10.1002/adfm.200801258 Zhou, 2015, Unraveling the order and disorder in poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) nanofilms, Macromolecules, 48, 5688, 10.1021/acs.macromol.5b00851 Wei, 2013, Morphological change and mobility enhancement in PEDOT:PSS by adding co-solvents, Adv Mater, 25, 2831, 10.1002/adma.201205158 Takano, 2012, PEDOT nanocrystal in highly conductive PEDOT:PSS polymer films, Macromolecules, 45, 3859, 10.1021/ma300120g Horii, 2018, Synthesis of highly conductive PEDOT:PSS and correlation with hierarchical structure, Polymer (Guildf), 140, 33, 10.1016/j.polymer.2018.02.034 Shi, 2016, Enhanced molecular packing of a conjugated polymer with high organic thermoelectric power factor, ACS Appl Mater Interfaces, 8, 24737, 10.1021/acsami.6b06899 Wei, 2015, Recent progress on PEDOT-based thermoelectric materials, Materials (Basel), 8, 732, 10.3390/ma8020732 Palumbiny, 2015, The crystallization of PEDOT:PSS polymeric electrodes probed in situ during printing, Adv Mater, 27, 3391, 10.1002/adma.201500315 Skotheim, 2007 Aleshin, 1998, Transport properties of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate), Synth Met, 94, 173, 10.1016/S0379-6779(97)04167-2 Ashizawa, 2005, Effects of solvent on carrier transport in poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate), Synth Met, 153, 5, 10.1016/j.synthmet.2005.07.214 Xiong, 2015, Highly electrical and thermoelectric properties of a PEDOT:PSS thin-film via direct dilution–filtration, RSC Adv, 5, 60708, 10.1039/C5RA07820B Yildrim, 2018, A theoretical mechanistic study on electrical conductivity enhancement of DMSO Treated PEDOT:PSS, J Mater Chem C, 10.1039/C8TC00917A Aleshin, 1999, Metallic conductivity of highly doped poly(3,4-ethylenedioxythiophene), Synth Met, 101, 369, 10.1016/S0379-6779(98)00758-9 Aleshin, 1998, Conductivity and magnetoconductivity below 1 K in films of poly(3,4-ethylenedioxythiophene) doped with CF3SO3, Synth Met, 94, 157, 10.1016/S0379-6779(98)00021-6 Kiebooms, 1999, Doped poly(3,4-ethylenedioxythiophene) films: thermal, electromagnetical and morphological analysis, Synth Met, 101, 436, 10.1016/S0379-6779(98)01121-7 Chang, 1999, Reflectance of conducting poly(3,4-ethylenedioxythiophene), Synth Met, 105, 203, 10.1016/S0379-6779(99)00095-8 Ali, 2018, Translated structural morphology of conductive polymer nanofilms synthesized by vapor phase polymerization, Synth Met, 48, 113, 10.1016/j.synthmet.2018.07.007 Coclite, 2013, 25th anniversary article: CVD polymers: a new paradigm for surface modification and device fabrication, Adv Mater, 25, 5392, 10.1002/adma.201301878 Poverenov, 2010, Major effect of electropolymerization solvent on morphology and electrochromic properties of PEDOT films, Chem Mater, 22, 4019, 10.1021/cm100561d Im, 2007, Grafted conducting polymer films for nano-patterning onto various organic and inorganic substrates by oxidative chemical vapor deposition, Adv Mater, 19, 2863, 10.1002/adma.200701170 Franco-Gonzalez, 2018, Substrate-dependent morphology and its effect on electrical mobility of doped poly(3,4-ethylenedioxythiophene) (PEDOT) thin films, ACS Appl Mater Interfaces, 10, 29115, 10.1021/acsami.8b08774 Lindell, 2006, Transparent, plastic, low-work-function poly(3,4-ethylenedioxythiophene) electrodes, Chem Mater, 18, 4246, 10.1021/cm061081m Zuber, 2008, Improved PEDOT conductivity via suppression of crystallite formation in Fe(III) tosylate during vapor phase polymerization, Macromol Rapid Commun, 29, 1503, 10.1002/marc.200800325 Fabretto, 2009, Influence of peg-ran-ppg surfactant on vapour phase polymerised PEDOT thin films, Macromol Rapid Commun, 30, 1846, 10.1002/marc.200900371 Fabretto, 2011, High conductivity PEDOT resulting from glycol/oxidant complex and glycol/polymer intercalation during vacuum vapour phase polymerisation, Polymer (Guildf), 52, 1725, 10.1016/j.polymer.2011.02.028 Fabretto, 2012, Polymeric material with metal-like conductivity for next generation organic electronic devices, Chem Mater, 24, 3998, 10.1021/cm302899v Bubnova, 2014, Semi-metallic polymers, Nat Mater, 13, 190, 10.1038/nmat3824 Khan, 2015, Acido-basic control of the thermoelectric properties of poly(3,4-ethylenedioxythiophene)tosylate (PEDOT-Tos) thin films, J Mater Chem C, 3, 10616, 10.1039/C5TC01952D Lee, 2017, Highly ordered nanoconfinement effect from evaporation-induced self-assembly of block copolymers on in situ polymerized PEDOT:Tos, ACS Macro Lett, 6, 386, 10.1021/acsmacrolett.7b00137 Wang, 2014, Enhanced thermoelectric properties of poly (3,4-ethylenedioxythiophene) thin films treated with H2SO4, Org Electron, 15, 3087, 10.1016/j.orgel.2014.09.012 Aasmundtveit, 1999, Structure of thin films of poly(3,4-ethylenedioxythiophene), Synth Met, 101, 561, 10.1016/S0379-6779(98)00315-4 Yu, 2013, Improvement of electrical conductivity of poly(3,4-ethylenedioxythiophene) (PEDOT) thin film, Mol Cryst Liq Cryst, 580, 76, 10.1080/15421406.2013.804761 Madl, 2011, Vapor phase polymerization of poly (3,4-ethylenedioxythiophene) on flexible substrates for enhanced transparent electrodes, Synth Met, 161, 1159, 10.1016/j.synthmet.2011.03.024 Suchand Sangeeth, 2009, Correlation of morphology and charge transport in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films, J Phys Condens Matter, 21, 072101, 10.1088/0953-8984/21/7/072101 Petsagkourakis, 2018, Correlating the Seebeck coefficient of thermoelectric polymer thin films to their charge transport mechanism, Org Electron, 52, 335, 10.1016/j.orgel.2017.11.018 Muñoz, 2016, Insulator to semimetallic transition in conducting polymers, Phys Rev B, 94, 205202, 10.1103/PhysRevB.94.205202 Franco-Gonzalez, 2017, Molecular dynamics study of morphology of doped PEDOT: from solution to dry phase, J Phys Chem B, 121, 4299, 10.1021/acs.jpcb.7b01510 Rudd, 2018, Charge transport and structure in semimetallic polymers, J Polym Sci Part B Polym Phys, 56, 97, 10.1002/polb.24530 Rolland, 2018, Understanding morphology-mobility dependence in PEDOT:Tos, Phys Rev Mater, 2, 045605, 10.1103/PhysRevMaterials.2.045605 Farka, 2017, Increase in electron scattering length in PEDOT:PSS by a triflic acid post-processing, Monatsh Chem, 148, 871, 10.1007/s00706-017-1973-1 Dominik, 2018, Metallic conductivity beyond the Mott minimum in PEDOT: Sulphate at low temperatures, Synth Met, 240, 59, 10.1016/j.synthmet.2018.03.015 Skotheim TA, Elsenbaumer RL, Reynolds JR. Handbook of conducting polymers, 2nd ed.; 1998. Grancarić, 2018, Conductive polymers for smart textile applications, J Ind Text, 48, 612, 10.1177/1528083717699368 Bharti, 2018, Conductive polymers for thermoelectric power generation, Prog Mater Sci, 93, 270, 10.1016/j.pmatsci.2017.09.004 Inal, 2018, Conjugated polymers in bioelectronics, Acc Chem Res, 51, 1368, 10.1021/acs.accounts.7b00624 Evans, 2018, A bird’s eye view of the synthesis and practical application of conducting polymers, Polym Int, 67, 351, 10.1002/pi.5531 Tee, 2018, Soft electronically functional polymeric composite materials for a flexible and stretchable digital future, Adv Mater, 1802560, 10.1002/adma.201802560 Elschner, 2010 Huang, 2010, Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices, Chem Soc Rev, 39, 2500, 10.1039/b907991m Liu, 2015, High-performance flexible all-solid-state supercapacitor from large free-standing graphene-PEDOT/PSS films, Sci Rep, 5, 17045, 10.1038/srep17045 Ludwig, 2006, Chronic neural recordings using silicon microelectrode arrays electrochemically deposited with a poly(3,4-ethylenedioxythiophene) (PEDOT) film, J Neural Eng, 3, 59, 10.1088/1741-2560/3/1/007 Paulsen, 2019, Organic mixed ionic–electronic conductors, Nat Mater Solazzo, 2019, PEDOT:PSS interfaces stabilised using a PEGylated crosslinker yield improved conductivity and biocompatibility, J Mater Chem B, 7, 4811, 10.1039/C9TB01028A Arias, 1999, Organic photodiodes using polymeric anodes, Synth Met, 102, 953, 10.1016/S0379-6779(98)00976-X Aernouts, 2004, Printable anodes for flexible organic solar cell modules, Thin Solid Films, 451–452, 22, 10.1016/j.tsf.2003.11.038 Kwon, 2018, Enhancement of conductivity and transparency for of poly(3,4-ethylenedioxythiophene) films using photo-acid generator as dopant, Polym (United Kingdom), 147, 30 Zhou, 2010, Indium tin oxide-free and metal-free semitransparent organic solar cells, Appl Phys Lett, 97, 153304, 10.1063/1.3499299 Angmo, 2013, Flexible ITO-free polymer solar cells, J Appl Polym Sci, 129, 1, 10.1002/app.38854 Po, 2012, Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area, Sol Energy Mater Sol Cells, 100, 97, 10.1016/j.solmat.2011.12.022 Fallahzadeh, 2016, Ultra-smooth poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for flexible indium tin oxide-free organic light-emitting diodes, J Lumin, 169, 251, 10.1016/j.jlumin.2015.09.021 Zhang, 2015, Low work-function poly(3,4-ethylenedioxylenethiophene): poly(styrene sulfonate) as electron-transport layer for high-efficient and stable polymer solar cells, Sci Rep, 5, 12839, 10.1038/srep12839 Hübler, 2011, Printed paper photovoltaic cells, Adv Energy Mater, 1, 1018, 10.1002/aenm.201100394 Cho, 2011, Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells, Sol Energy Mater Sol Cells, 95, 3269, 10.1016/j.solmat.2011.07.009 Liu, 2014, Low-cost and flexible poly(3,4-ethylenedioxythiophene) based counter electrodes for efficient energy conversion in dye-sensitized solar cells, J Mater Chem A, 2, 10938, 10.1039/c4ta00563e Villers, 2003, The influence of the range of electroactivity and capacitance of conducting polymers on the performance of carbon conducting polymer hybrid supercapacitor, J Electrochem Soc, 150, A747, 10.1149/1.1571530 Yan, 2018, Ionically cross-linked PEDOT:PSS as a multi-functional conductive binder for high-performance lithium–sulfur batteries, Sustain Energy Fuels, 2, 1574, 10.1039/C8SE00167G Xia, 2014, A new type of porous graphite foams and their integrated composites with oxide/polymer core/shell nanowires for supercapacitors: structural design, fabrication, and full supercapacitor demonstrations, Nano Lett, 14, 1651, 10.1021/nl5001778 Bubnova, 2011, Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene), Nat Mater, 10, 429, 10.1038/nmat3012 Park, 2013, Flexible PEDOT electrodes with large thermoelectric power factors to generate electricity by the touch of fingertips, Energy Environ Sci, 6, 788, 10.1039/c3ee23729j Cho, 2016, Outstanding low temperature thermoelectric power factor from completely organic thin films enabled by multidimensional conjugated nanomaterials, Adv Energy Mater, 6, 1502168, 10.1002/aenm.201502168 Kim, 2015, Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics, Science, 348, 109, 10.1126/science.aaa4166 Xu, 2019, High-performance PEDOT:PSS flexible thermoelectric materials and their devices by triple post-treatments, Chem Mater, 31, 5238, 10.1021/acs.chemmater.9b01500 Gao, 2016, Conducting polymer/carbon particle thermoelectric composites: emerging green energy materials, Compos Sci Technol, 124, 52, 10.1016/j.compscitech.2016.01.014 McGrail, 2015, Polymer composites for thermoelectric applications, Angew Chemie Int Ed, 54, 1710, 10.1002/anie.201408431 Shi, 2015, Unravelling doping effects on PEDOT at the molecular level: from geometry to thermoelectric transport properties, J Am Chem Soc, 137, 12929, 10.1021/jacs.5b06584 Kayser, 2018, Stretchable conductive polymers and composites based on PEDOT and PEDOT : PSS, Adv Mater, 1806133, 1 Fan, 2019, PEDOT : PSS for flexible and stretchable electronics : modifications, strategies, and applications, Adv Sci, 1900813, 10.1002/advs.201900813 Aleshin, 1997, Electronic transport in doped poly (3,4-ethylenedioxythiophene) near the metal- insulator transition, Synth Met, 90, 61, 10.1016/S0379-6779(97)81227-1 Pyshkina, 2010, Poly(3,4-ethylenedioxythiophene): synthesis and properties, Sci J Riga Tech Univ Mater Sci Appl Chem, 21, 51 Kim, 2013, Engineered doping of organic semiconductors for enhanced thermoelectric efficiency, Nat Mater, 12, 719, 10.1038/nmat3635 Hojati-Talemi, 2013, Ultrathin polymer films for transparent electrode applications prepared by controlled nucleation, ACS Appl Mater Interfaces, 5, 11654, 10.1021/am403135p Tsai, 2014, A facile dedoping approach for effectively tuning thermoelectricity and acidity of PEDOT:PSS films, Org Electron Phys Mater Appl, 15, 641 Yang, 2015, Enhanced thermoelectric properties of sorbitol-mixed PEDOT:PSS thin films by chemical reduction, J Mater Sci Mater Electron, 26, 2838, 10.1007/s10854-015-2766-0 Liu, 2015, The optimization of thermoelectric properties in a PEDOT:PSS thin film through post-treatment, RSC Adv, 5, 1910, 10.1039/C4RA09147G Anno, 2015, Thermoelectric power-generation characteristics of PEDOT:PSS thin-film devices with different thicknesses on polyimide substrates, J Electron Mater, 44, 2105, 10.1007/s11664-015-3668-x Mengistie, 2015, Enhanced thermoelectric performance of PEDOT:PSS flexible bulky papers by treatment with secondary dopants, ACS Appl Mater Interfaces, 7, 94, 10.1021/am507032e Petsagkourakis, 2016, Structurally-driven enhancement of thermoelectric properties within poly(3,4-ethylenedioxythiophene) thin films, Sci Rep, 6, 30501, 10.1038/srep30501 Yamaguchi, 2018, Highly flexible and conductive glycerol-doped PEDOT:PSS films prepared under an electric field, J Electron Mater, 47, 3370, 10.1007/s11664-018-6292-8 Lee, 2018, Highly conductive, stretchable, and transparent PEDOT:PSS electrodes fabricated with triblock copolymer additives and acid treatment, ACS Appl Mater Interfaces, 10, 28027, 10.1021/acsami.8b07287 Zhang, 2018, Enhancement of the thermoelectric properties of PEDOT:PSS: Via one-step treatment with cosolvents or their solutions of organic salts, J Mater Chem A, 6, 7080, 10.1039/C7TA11148G Wang, 2018, Enhancement of thermoelectric performance of PEDOT:PSS films by post-treatment with a superacid, RSC Adv, 8, 18334, 10.1039/C8RA02058B Rudd, 2018, Diffusion controlled vapour deposition of mixed doped PEDOT, Synth Met, 242, 61, 10.1016/j.synthmet.2018.04.010