Using waste plastic bottles as additive for stone mastic asphalt

Behbehani, 2009, Effect of fiber type and content on the performance of stone mastic asphalt, J Appl Sci, 9, 1980, 10.3923/jas.2009.1980.1984 Muniandy, 2006, Laboratory diameteral fatigue performance of stone matrix asphalt with cellulose oil palm fiber, Am J Appl Sci, 3 Asi, 2006, Laboratory comparison study for the use of stone matrix asphalt in hot weather climates, Construct Build Mater, 20, 982, 10.1016/j.conbuildmat.2005.06.011 AI-Hadidy, 2009, Mechanistic analysis of ST and SBS-modified flexible pavements, Construct Build Mater, 23, 2941, 10.1016/j.conbuildmat.2009.02.023 Moghaddam, 2011, A review on fatigue and rutting performance of asphalt mixes, Sci Res Essays, 6, 670 Chiu, 2007, Laboratory study on stone matrix asphalt using ground tire rubber, Construct Build Mater, 21, 1027, 10.1016/j.conbuildmat.2006.02.005 Moghadas, 2010, Fatigue behavior of SMA and HMA mixtures, Construct Build Mater, 24, 1158, 10.1016/j.conbuildmat.2009.12.025 Muniandy, 2001, Study on the use of oil palm fiber in rubberized stone mastic asphalt. road safety research center, REAAA J, 7, 19 Ozen, 2008, Laboratory performance comparison of the elastomer-modified asphalt mixtures, Build Environ, 43, 1270, 10.1016/j.buildenv.2007.03.010 Casey, 2008, Development of a recycled polymer modified binder for use in stone mastic asphalt, Resour, Conserv Recycl, 52, 1167, 10.1016/j.resconrec.2008.06.002 Awwad, 2007, The use of polyethylene in hot asphalt mixtures, Am J Appl Sci, 4, 390, 10.3844/ajassp.2007.390.396 Ahmed, 2007, Improvement of Marshall properties of the asphalt concrete mixtures using the polyethylene as additive, Eng Technol, 25, 383 Chiu, 2007, C.A laboratory study on stone matrix asphalt using ground tire rubber, Construct Build Mater, 21, 1027, 10.1016/j.conbuildmat.2006.02.005 Xue, 2009, Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: pavement performance and environmental impact, Construct Build Mater, 23, 989, 10.1016/j.conbuildmat.2008.05.009 Fontes, 2010, Evaluating permanent deformation in asphalt rubber mixtures, Construct Build Mater, 24, 1193, 10.1016/j.conbuildmat.2009.12.021 Ismail, 2008, Use of waste plastic in concrete mixture as aggregate replacement, Waste Manage, 28, 2041, 10.1016/j.wasman.2007.08.023 Yildirim, 2007, Polymer modified asphalt binders, Construct Build Mater, 21, 66, 10.1016/j.conbuildmat.2005.07.007 Tapkın, 2009, Accumulated strain prediction of polypropylene modified Marshall specimens in repeated creep test using artificial neural networks, Expert Syst Appl, 36, 11186, 10.1016/j.eswa.2009.02.089 Al-Hadidy, 2009, Mechanistic approach for polypropylene-modified flexible pavements, Mater Design, 30, 1133, 10.1016/j.matdes.2008.06.021 Al-Hadidy, 2009, Effect of polyethylene on life of flexible pavements, Construct Build Mater, 23, 1456, 10.1016/j.conbuildmat.2008.07.004 Hinisliglu, 2004, Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix, J Mater Lett, 58, 267, 10.1016/S0167-577X(03)00458-0 Zoorob, 2000, Laboratory design and investigation of the properties of continuously graded asphaltic concrete containing recycled plastics aggregate replacement (plastiphalt), Cem Concr Compos, 22, 233, 10.1016/S0958-9465(00)00026-3 Kamada, 2002, Utilization of waste plastics in asphalt mixture, Mem Fac Eng Osaka City Univ, 43, 111 Tasdemir, 2009, High temperature properties of wax modified binders and asphalt mixtures, Construct Build Mater, 23, 3220, 10.1016/j.conbuildmat.2009.06.010 Abtahi, 2010, Fiber-reinforced asphalt-concrete – a review, Construct Build Mater, 24, 871, 10.1016/j.conbuildmat.2009.11.009 Chen, 2009, Evaluation and design of fiber-reinforced asphalt mixtures, Mater Design, 30, 2595, 10.1016/j.matdes.2008.09.030 Sabina, 2009, Performance evaluation of waste plastic/polymer modified bituminous concrete mixes, J Sci Indus Res, 68, 975 Cheng Stephan ZD, editor. Handbook of thermal analysis and caloimetry. Gallagher Patrick K, series editor. Applications to polymers and plastics, vol. 3. Elsevier; 2007. Raabe, 2004, Recrystalization in deformed and heat PET polymer sheets, Mater Sci Forum, 467–470, 551, 10.4028/www.scientific.net/MSF.467-470.551 Seyler R, 1997, Semi-crystalline polymers. Two phases or three? An overview and perspective, J Therm Anal, 49, 491, 10.1007/BF01987476 Gueguen, 2010, A new three-phase model to estimate the effective elastic properties of semi-crystalline polymers: application to PET, Mech Mater, 42, 1, 10.1016/j.mechmat.2009.04.012 Keating, 2002, Annealing effect on semi-crystalline materials in creep behavior, J Therm Anal Calorim, 69, 37, 10.1023/A:1019925420733 Li, 2008, Hot embossing/bonding of a poly(ethylene terephthalate) (PET) microfluidic chip, J Micromech Microeng, 18-015008, 10pp Ahmedzade, 2008, Effect of polyester resin additive on the properties of asphalt binders and mixtures, Construct Build Mater, 22, 481, 10.1016/j.conbuildmat.2006.11.015 Tayfur, 2007, Investigation of rutting performance of asphalt mixtures containing polymer modifiers, Construct Build Mater, 27, 328, 10.1016/j.conbuildmat.2005.08.014 Designing and constructing SMA mixture. State –of-the-Practice. National Asphalt Pavment Association(NAPA). Quality Improvement Series 122. Sengoz, 2007, Minimum voids in mineral aggregate in hot-mix asphalt based on asphalt film thickness, Build Environ, 42, 3629, 10.1016/j.buildenv.2006.10.005 Mahrez, 2010, Fatigue characteristics of stone mastic asphalt mix reinforced with fiber glass, Int J Phys Sci, 5, 1840 The asphalt handbook. Asphalt institute. 7th edition. Manual series No. 4 (MS-4); 2007. Cao, 2007, Study on properties of recycled tire rubber modified asphalt mixtures using dry process, Construct Build Mater, 21, 1011, 10.1016/j.conbuildmat.2006.02.004