Dynamic numerical model of a high efficiency PV–T collector integrated into a domestic hot water system

Bergene, 1995, Model calculations on a flat-plate solar heat collector with integrated solar cells, Sol. Energy, 55, 453, 10.1016/0038-092X(95)00072-Y Chan, 1986, A comparative study of extraction methods for solar cell model parameters, Solid-State Electron., 29, 329, 10.1016/0038-1101(86)90212-1 Chow, 2003, Performance analysis of photovoltaic–thermal collector by explicit dynamic model, Sol. Energy, 75, 143, 10.1016/j.solener.2003.07.001 Chow, 2010, A review on photovoltaic/thermal hybrid solar technology, Appl. Energy, 87, 365, 10.1016/j.apenergy.2009.06.037 Chow, 2012, Hybrid solar: a review on photovoltaic and thermal power integration, Int. J. Photoenergy, 2012, 1 Cristofari, 2009, Thermal behaviour of a copolymer PV/Th solar system in low flow rate conditions, Sol. Energy, 83, 1123, 10.1016/j.solener.2009.01.008 Cristofari, 2012, Innovative patented PV/TH Solar Collector: optimization and performance evaluation, Energy Procedia, 14, 1, 10.1016/j.egypro.2011.12.923 De Soto, 2006, Improvement and validation of a model for photovoltaic array performance, Sol. Energy, 80, 78, 10.1016/j.solener.2005.06.010 Duffie, 1991 Dupeyrat, 2011 Dupeyrat, 2011, Efficient single glazed flat plate photovoltaic–thermal hybrid collector for domestic hot water system, Sol. Energy, 85, 1457, 10.1016/j.solener.2011.04.002 Dupeyrat, 2011, Improvement of PV module optical properties for PV–thermal hybrid collector application, Sol. Energy Mater. Sol. Cells, 95, 2028, 10.1016/j.solmat.2011.04.036 Dupeyrat, P., Ménézo, C., Bai, Y., Fortuin, S., Kwiatkowski, Rommel, G.M., Stryi-Hipp, G. 2011d. Hybrid photovoltaic–thermal (PV–T) solar cogeneration at the building’s scale. In: Proceedings, CISBAT 2011, “CleanTech for Sustainable Buildings – From Nano to Urban Scale”, Lausanne, Switzerland, 14–16 September. Dupeyrat, 2012, Study of the thermal and electrical performances of PVT solar hot water system, Energy Build. Florschuetz, 1979, Extension of the Hottel–Whillier model to the analysis of combined photovoltaic/thermal flat collectors, Sol. Energy, 22, 361, 10.1016/0038-092X(79)90190-7 Fraisse, 2002, Development of a simplified and accurate building model based on electrical analogy, Energy Build., 34, 1017, 10.1016/S0378-7788(02)00019-1 Gaillard, L., Ménézo, C., 2012. Modélisation et Validation Expérimentale des Effets des Mismatch Thermiques sur les Systèmes Photovoltaïques Intégrées au Bâtiments (PVIB). Presented at the CIFEM, Ouagadougou. Hermann, 2005 Hollands, 1976, Free convective heat transfer across inclined air layers, J. Heat Transfer, 98, 189, 10.1115/1.3450517 Hottel, H.C., Whillier, A., 1958. Evaluation of Flat Plate Collector Performance. In: Trans. the Conference on the Use of Solar Energy, University of Arizona Press, vol. 2, pp. 1–74. Kaushika, 2007, An investigation of mismatch losses in solar photovoltaic cell networks, Energy, 32, 755, 10.1016/j.energy.2006.06.017 Notton, 2005, Modelling of a double-glass photovoltaic module using finite differences, Appl. Therm. Eng., 25, 2854, 10.1016/j.applthermaleng.2005.02.008 Picault, 2010, Forecasting photovoltaic array power production subject to mismatch losses, Sol. Energy, 84, 1301, 10.1016/j.solener.2010.04.009 Pieper, 2010, A simple and accurate numerical network flow model for bionic micro heat exchangers, Heat Mass Transfer, 491 TRNSYS Manual, 2006, TRNSYS 16 a TRaNsient SYstem Simulation program, vol. 5 Sizmann, 1991, Solar Power Plants, 17 Zondag, 2002, The thermal and electrical yield of a PV–thermal collector, Sol. Energy, 72, 113, 10.1016/S0038-092X(01)00094-9