Effect of the Heat Treatment on the Corrosion Resistance of Duplex Stainless Steels
Tóm tắt
Duplex stainless steels (DSS) are biphasic austenitic-ferritic steels in which the best combination of mechanical and corrosion resistance properties is achieved for an almost equal volume fraction of the phases. In this work, the effect of secondary phases precipitation on the corrosion resistance of four DSS grades (2101, 2304, 2205 and 2507), after isothermal aging in the critical temperature range 750-900 °C, was studied. The corrosion resistance was investigated by potentiodynamic polarization tests in both 0.6 M NaCl solution (pH 7) and in an acid chlorinated solution (pH 3) at room temperature. Moreover, the critical pitting temperature was determined according to ASTM G150. The results showed that secondary phases precipitation mainly influenced the resistance to corrosion of the lean duplex grades.
Tài liệu tham khảo
R.N. Gunn, Duplex Stainless Steels: Microstructure, Properties and Applications, 1st ed. (Abington Publishing, Cambridge, 1997)
K.W. Chan and S.C. Tjong, Effect of Secondary Phase Precipitation on the Corrosion Behavior of Duplex Stainless Steels, Materials, 2014, 7, p 5268–5304
T.H. Chen, K.L. Weng, and J.R. Yang, The Effect of High Temperature Exposure on the Microstructural Stability and Toughness Property in a 2205 Duplex Stainless Steel, Mater. Sci., 2002, 338, p 259–270
I. Calliari, K. Brunelli, M. Dabalà, and E. Ramous, Measuring Secondary Phases in Duplex Stainless Steels, J. Met., 2009, 61, p 80–83
R. Qvarfort, Critical Pitting Temperature Measurements of Stainless Steels with an Improved Electrochemical Method, Corros. Sci., 1989, 29, p 987–993
N.J. Laycock, M.H. Moayed, and R.C. Newman, Metastable Pitting and the Critical Pitting Temperature, J. Electrochem. Soc., 1998, 145(8), p 2622–2628
M.H. Moayed, N.J. Laycock, and R.C. Newman, Dependence of the Critical Pitting Temperature on Surface Roughness, Corros. Sci., 2003, 45(6), p 1203–1216
D. Caluscio dos Santos, R. Magnabosco, and C. de Moura-Neto, Influence of Sigma Phase Formation on Pitting Corrosion of an Aged UNS S31803 Duplex Stainless Steel, Corrosion, 2013, 69(9), p 900–911
Z. Zhang, H. Zhang, H. Zhao, and J. Li, Effect of Prolonged Thermal Cycles on the Pitting Corrosion Resistance of a Newly Developed LDX 2404 Lean Duplex Stainless Steel, Corros. Sci., 2016, 103, p 189–195
I. Calliari, K. Brunelli, M. Zanellato, E. Ramous, and R. Bertelli, Microstructural Modification During Isothermal Ageing of a Low Nickel Duplex Stainless Steel, J. Mater. Sci., 2009, 4(14), p 3764–3769
M. Breda, L. Pezzato, M. Pizzo, and I. Calliari, Effect of Cold Rolling on Pitting Resistance in Duplex Stainless Steels, La Metall. Ital., 2014, 6, p 15–19
L. Zhang, W. Zhang, Y. Jiangn, B. Deng, D. Sun, and J. Li, Influence of Annealing Treatment on the Corrosion Resistance of Lean Duplex Stainless Steel 2101, Electrochim. Acta, 2009, 54, p 5387–5392
H. Tan, Z. Wang, Y. Jiang, Y. Yang, B. Deng, H. Song, and J. Li, Influence of Welding Thermal Cycles on Microstructure and Pitting Corrosion Resistance of 2304 Duplex Stainless Steels, Corros. Sci., 2012, 55, p 368–377
J.S. Lee, S.H. Jeon, and Y.S. Park, Effects of Solution Annealing Temperature on the Galvanic Corrosion Behavior of the Super Duplex Stainless Steels, JMEPEG, 2013, 22(2), p 557–562
F. Tehovnik, B. Arzen, B. Arh, D. Skobir, B. Pirnar, and B. Zuzek, Microstructure Evolution in Saf 2507 Super Duplex Stainless Steel, Mater. Tehnol., 2011, 45(4), p 339–345
H. Sieurin and R. Sandstrom, Sigma Phase Precipitation in Duplex Stainless Steel 2205, Mater. Sci. Eng., 2007, 444, p 271–276
Practical Guidelines for the Fabrication of Duplex Stainless Steels, 3rd ed., International Molybdenum Association (IMOA), London, 2014
J.O. Nilsson and A. Wilson, Influence of Isothermal Phase Transformation on Toughness and Pitting Corrosion of Super Duplex Stainless Steel SAF 2507, Mater. Sci. Technol., 1993, 9, p 545–554
I. Calliari, M. Dabalà, E. Ramous, and G. Straffelini, New Lean Duplex Stainless Steels for Structural Application, Mater. Sci. Forum, 2009, 604–605, p 419–426
I. Calliari, M. Zanesco, E. Ramous, and P. Bassani, Effects of Isothermal Ageing and Continuous Cooling After Solubilization in a Duplex Stainless Steel, J. Mater. Eng. Perform., 2007, 16, p 109–112
L. Zhang, Y. Jiang, B. Deng, W. Zhang, J. Xu, and J. Li, Effect of Aging on the Corrosion Resistance of 2101 Lean Duplex Stainless Steel, Mater. Charact., 2009, 60, p 1522–1528
G. Straffelini, S. Baldo, I. Calliari, and E. Ramous, Effect of Aging on the Fracture Behaviour of Lean Duplex Stainless Steels, Metall. Mater. Trans. A, 2009, 40A, p 2616–2621
I. Calliari, M. Breda, M. Pellizzari, A.F.B.A. Perez, and E. Ramous, in The Nitrides in Duplex Stainless Steels. 8th European Stainless Steels and Duplex Stainless Steels Conference, 28–30 April, Graz, Austria (2015)
N. Llorca-Isern, H. López-Luqu, I. López-Jiménez, and M.V. Biezma, Identification of Sigma and Chi Phases in Duplex Stainless Steels, Mater. Charact., 2016, 112, p 20–29
Y. He, N. Zhu, X. Lu, and L. Li, Experimental and Computational Study on Microstructural Evolution in 2205 Duplex Stainless Steel During High Temperature Aging, Mater. Sci. Eng., 2010, 528(2), p 721–729
H. Luo, X.G. Li, C.F. Dong, and K. Xiao, Effect of Solution Treatment on Pitting Behavior of 2205 Duplex Stainless Steel, Arab. J. Chem., 2012, 10, p S90–S94
I. Calliari, G. Straffelini, and E. Ramous, Investigation of Secondary Phase Effect on 2205 DSS Fracture Toughness, Mater. Sci. Technol., 2010, 26(1), p 81–86
D. Villalobos, A. Albiter, and C. Maldonado, Microstructural Changes in SAF 2507 Superduplex Stainless Steel Produced by Thermal Cycle, Rev. Mater., 2009, 14(3), p 1061–1069
T. Berecz, É. Fazakas, I. Mészáros, and I. Sajó, Decomposition Kinetics of Ferrite in Isothermally Aged SAF2507 Type Duplex Stainless Steel, J. Mater. Eng. Perform., 2015, 24, p 4777–4788
N. Sathirachindaa, R. Pettersson, S. Wessmanc, U. Kivisäkkd, and J. Pana, Scanning Kelvin Probe Force Microscopy Study of Chromium Nitrides in 2507 Super Duplex Stainless Steel—Implications and Limitations, Electrochim. Acta, 2011, 56, p 1792–1798
S.A. Golovanenko, E.G. Fel’Dgandler, A.P. Shlyamnev, and E.T. Shapovalov, in Manufacture and Application of Corrosion-Resistant Duplex Steels in Russia. 4th International Conference on Duplex Stainless Steels, Glasgow, Scotland, p. 115 (1994)
J.S. Kim and H.S. Kwon, Effects of Tungsten on Corrosion and Kinetics of Sigma Phase Formation of 25% Chromium Duplex Stainless Steel, Corrosion, 1999, 55, p 512–552