Correlations between the abrasive wear, fatigue, and tensile properties of filler-dispersed polyamide 6

Bijwe, 2006, Optimum concentration of reinforcement and solid lubricant in polyamide 12 composites for best tribo-performance in two wear modes, Tribol. Lett., 21, 57, 10.1007/s11249-005-9010-7 Tanaka, 1975, Wear of polymer based composites, Sen’i Gakkaishi, 31, 234, 10.2115/fiber.31.8_P234 Bekhet, 1999, Tribological behavior of drawn polypropylene, Wear, 236, 55, 10.1016/S0043-1648(99)00262-8 Ratner, 1967, Connection between wear-resistance of plastics and other mechanical properties, 145 Lancaster, 1969, Abrasive wear of polymers, Wear, 14, 223, 10.1016/0043-1648(69)90047-7 Lancaster, 1973, Basic mechanisms of friction and wear of polymers, Plast. Polym., 41, 297 Lhymn, 1987, Effect of normal load on the specific wear rate of fibrous composites, Wear, 120, 1, 10.1016/0043-1648(87)90130-X Kumaresan, 2012, Dynamic mechanical analysis and three-body wear of carbon–epoxy composite filled with SiC particles, J. Reinf. Plast. Compos., 31, 1435, 10.1177/0731684412459250 Irisawa, 2006, Wear resistance and mechanical properties of polymeric fibers filled with inorganic fillers, MRS Symp. Proc., 977, 234, 10.1557/PROC-977-0977-FF12-06 Irisawa, 2010, A method to determine wear rates of fibers and its application to polymeric fibers added with inorganic fillers, Wear, 268, 1148, 10.1016/j.wear.2010.01.002 Irisawa, 2011, Wear resistance and tensile properties of filler-added polyamide 6 fibers, Sen'i Gakkaishi, 67, 109-, 10.2115/fiber.67.109 Irisawa, 2011, Analysis on abrasive wear rate of VGCF/polyamide 6 composite fibers, Tribol. Online, 6, 207, 10.2474/trol.6.207 Dasari, 2009, Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites, Mater. Sci. Eng. R, 63, 31, 10.1016/j.mser.2008.10.001 Wetzel, 2002, Impact and wear resistance of polymer nanocomposites at low filler content, Polym. Eng. Sci., 42, 1919, 10.1002/pen.11084 Shi, 2003, Friction and wear of low nanometer Si3N4 filled epoxy composites, Wear, 254, 784, 10.1016/S0043-1648(03)00190-X Dasaria, 2005, Clay exfoliation and organic modification on wear of nylon 6 nanocomposites processed by different routes, Comp. Sci. Tech., 65, 2314, 10.1016/j.compscitech.2005.06.017 Morioka, 2015, Influence of viecoelsticity on friction coefficient by analysis on abrasive wear of filler-dispersed polyamide 6, Wear 324–325, 17, 10.1016/j.wear.2014.11.021 Zhou, 2006, Fatigue performance of an injection-molded short E-glass fiber-reinforced polyamide 6,6. I. Effects of orientation, holes, and weld line, Polym. Compos., 27, 230, 10.1002/pc.20182 Morikawa, 1992, Comparison of fatigue behavior of polyamides with different molecular structures, J. Soc. Mat. Sci. Jpn, 41, 804, 10.2472/jsms.41.804 Fujihira, 2009, Specimen geometry dependent effects of vapor grown carbon fibers on fracture toughness of polyamide 6, Int. J. Polym. Technol., 1, 35 Bird, 1971, The fracture of polystyrene: some observations on strength and cracking phenomena, Polymer, 12, 742, 10.1016/0032-3861(71)90023-1 Zhang, 2008, Tensle and tribological behaviors of PEEK/nano-SiO2 composites compounded using a ball milling technique, Compos. Sci. Technol., 68, 3073, 10.1016/j.compscitech.2008.06.027 1991 Kramer, 1983 Kobayashi, 2007, A comparative study of fracture behavior between carbon black/poly(ethylene terephthalate) and multiwalled carbon nanotube/poly(ethylene terephthalate) composite films,, J. Appl. Polym. Sci., 106, 152, 10.1002/app.26685 Chang, 2006, Tribological properties of epoxy nanocomposites Part II: A combinative effect of short carbon fibre with nano-TiO2, Wear, 260, 869, 10.1016/j.wear.2005.04.002 Zum Gahr, 1988, Modeling of two-body abrasive wear, Wear, 124, 87, 10.1016/0043-1648(88)90236-0 Bernasconi, 2007, Effect of fibre orientation on the fatigue behaviour of a short glass fibre reinforced polyamide-6, Int. J. Fatigue, 29, 199, 10.1016/j.ijfatigue.2006.04.001 Nishida, 1967