Asphalt wearing course optimization for road traffic noise reduction

WHO, 2011 Becker, 2003, The benefits and costs of noise reduction, J. Environ. Plann. Manage., 46, 97, 10.1080/713676703 Miedema, 2011, Annoyance from transportation noise: relationships with exposure metrics DNL and DENL and their confidence intervals, Environ. Health Perspect., 109, 409, 10.1289/ehp.01109409 Blickley, 2010, Impacts of anthropogenic noise on wildlife: research priorities for the development of standards and mitigation, J. Int. Wildl. Law Policy, 13, 274, 10.1080/13880292.2010.524564 WHO, 2009 European Union, 2012, Committee of the regions on ‘the Environmental Noise Directive – the way forward’, Off. J. Eur. Union European Commission, Report from the Commission to the European Parliament and the Council: On the implementation of the Environmental Noise Directive in accordance with Article 11 of Directive 2002/49/EC. COM, 2011, 321 final. Brussels, p. 13. Directive 2002/49/EC of the European Parliament and of the Council of 25 June 2002 relating to assessment and management of environmental noise. European Commission, White Paper. Road to a Single European Transport Area – Towards a competitive and resource efficient transport system, COM, 2011, 144 final, Brussels, p. 31. CEDR. Strategic Plan 3, 2013–2017 Conference of European Directors of Roads, Paris, 2013, p. 27. Sandberg, 2002 Rasmussen, 2007 Bendtsen, 2010 Gibbs, 2005 Bendtsen, 2005, Noise-reducing pavements for highways and urban roads – State of the Art in Denmark, J. Assoc. Asphalt Paving Technol., 74 Kane, 2009 Pucher, 2006, 116 T. Dare, R. McDaniel, A. Shah, Modeling Tire-Pavement Noise Using MnROAD Data, Transportation Research Board 94th Annual Meeting, Washington D.C., U.S.A., 2015, p. 16. K. J. Plotkin, M. L. Montroll, W. R. Fuller, The generation of tyre noise by air pumping and carcass vibration, in: Proceedings of Inter-Noise 80, Miami, Florida, USA, 1980, 273–276. M. Bergmann, Noise generation by tyre vibration, in: Proceedings of Inter-Noise 80, Miami, Florida, USA, 1980, 239–244. R. E. Hayden, Roadside noise from the interaction of a rolling tyre with the road surface, in: Proceedings of the Purdue Noise Control Conference, Layfette, Indiana USA, 1971, 59–64. J-F. Hamet, C. Deffayet, M. A. Pallas, Air pumping phenomena in road cavities, in: Proceedings of the International Tire/Road Noise Conference 1990, Gothernburg, Sweden. P. A. Morgan, P. M. Nelson, H. Steven, Integrated assessment of noise reduction measures in the road transport sector, Project report PR SE/652/03, 2003, p. 116. Ahammed, 2011, Acoustic absorption of conventional pavements, Int. J. Pavement Res. Technol., 4, 41 Yu, 2014, Long-term field performance of porous asphalt pavement in China, Road Mater. Pavement Des., 16, 214, 10.1080/14680629.2014.944205 Ongel, 2012, Prediction of lifetime for different asphalt concrete mixes, Road Mater. Pavement Des., 13, 203, 10.1080/14680629.2012.682382 Huurman, 2010, Porous asphalt ravelling in cold weather conditions, Int. J. Pavement Res. Technol., 3, 110 Takahashi, 2013, Comprehensive study on the porous asphalt effects on expressways in Japan: based on field data analysis in the last decade, Road Mater. Pavement Des., 14, 239, 10.1080/14680629.2013.779298 Ranieri, 2010, Relationships among gradation curve clogging resistance, and pore-based indices of porous asphalt mixes, Road Mater. Pavement Des., 11, 507, 10.1080/14680629.2010.9690344 Thomsen, 2008 Bueno, 2014, Macrotexture influence on vibrational mechanisms of the tyre–road noise of an asphalt rubber pavement, Int. J. Pavement Eng., 15, 606, 10.1080/10298436.2013.790547 Paje, 2013, Road pavement rehabilitation using a binder with a high content of crumb rubber: influence on noise reduction, Constr. Build. Mater., 47, 789, 10.1016/j.conbuildmat.2013.05.008 Biligiri, 2013, Understanding the fundamental material properties of low-noise poroelastic road surfaces, Int. J. Pavement Eng., 14, 12, 10.1080/10298436.2011.608798 Morgan, 2008 T. Dare, R. McDaniel, A. Shah, R. Bernhard, A Review of Tire-Pavement Noise Models, 2011, 38 p. Anfosso-Lédée, 2006, Sound propagation above a porous road surface by boundary element method, Road Mater. Pavement Des., 7, 289, 10.1080/14680629.2006.9690039 Wayson, 1998 Molenaar, 2006, Performance of porous asphalt concrete, J. Assoc. Asphalt Paving Technol., 75, 1053 Descornet, 2005, Low-noise road surfaces – european state of the art, J. Assoc. Asphalt Paving Technol., 74, 1059 Losa, 2012, A comprehensive model to predict acoustic absorption factor of porous mixes, Mater. Struct., 45, 923, 10.1617/s11527-011-9808-8 Rajaei, 2014, Establishment of relation between pavement surface friction and mixture design properties, Transp. Res. Rec., 2457, 114, 10.3141/2457-12 U. Sandberg, G. Descornet, Road surface influence on tire/road noise, in: Proceedings of the 9th International Conference on Noise Control Engineering (Inter-noise 80), Miami, Florida, 8–10 December, 1980, pp. 1–16. Cesbron, 2008, Influence of road texture on tyre/road contact in static conditions, Road Mater. Pavement Des., 9, 689 Izevbekhai, 2013, Development and validation of a tenable process for quantifying texture spikiness for pavement noise prediction, Int. J. Pavement Eng., 14, 190, 10.1080/10298436.2012.698013 Arbeitsgruppe Asphaltbauweisen, 2008. Technische Lieferbedingungen fur Asphaltmischgut fur den Bau von Verkehrsflachenbefestigungen (TL Asphalt-StB 07). Cologne: Forschungsgesellschaft fur Straßen-und Verkehrswesen (FGSV) Verlag, FGSV 797. Vaitkus, 2014, Design solutions for pavements structure affected by static and impact load, Balt. J. Road Bridge Eng., 9, 269, 10.3846/bjrbe.2014.33 Vaitkus, 2012, The road of experimental pavement structures: experience of five year operation, Balt. J. Road Bridge Eng., 7, 220, 10.3846/bjrbe.2012.30 Vaitkus, 2013, Use of local aggregates in high modulus asphalt concrete layers, Građevinar, 65, 353 Vaitkus, 2014, Peculiarity of low noise pavement design under Lithuanian conditions, Balt. J. Road Bridge Eng., 9, 155, 10.3846/bjrbe.2014.20