Thermally stable polymers for advanced high-performance gas separation membranes

Sadrzadeh, 2015, Nanofiltration of oil sands boiler feed water: Effect of pH on water flux and organic and dissolved solid rejection, Sep Purif Technol, 141, 339, 10.1016/j.seppur.2014.12.011 Shirazian, 2012, Development of a mass transfer model for simulation of sulfur dioxide removal in ceramic membrane contactors, Asia-Pac J Chem Eng, 7, 828, 10.1002/apj.641 Shirazian, 2012, Implementation of the finite element method for Simulation of mass transfer in membrane contactors, Chem Eng Technol, 35, 1077 Rezakazemi, 2011, CFD simulation of natural gas sweetening in a gas-liquid hollow-fiber membrane contactor, Chem Eng J, 168, 1217, 10.1016/j.cej.2011.02.019 Rezakazemi, 2012, Simulation of ammonia removal from industrial wastewater streams by means of a hollow-fiber membrane contactor, Desalination, 285, 383, 10.1016/j.desal.2011.10.030 Shirazian, 2012, Hydrodynamics and mass transfer simulation of wastewater treatment in membrane reactors, Desalination, 286, 290, 10.1016/j.desal.2011.11.039 Shirazian, 2012, Separation of CO2 by single and mixed aqueous amine solvents in membrane contactors: fluid flow and mass transfer modeling, Engineering with Computers, 28, 189, 10.1007/s00366-011-0237-7 Fasihi, 2012, Computational fluid dynamics simulation of transport phenomena in ceramic membranes for SO2 separation, Mathematical and Computer Modelling, 56, 278, 10.1016/j.mcm.2012.01.010 Internation Energy Agency (IEA), CO2 emissions from fuel combustion, Paris, France. 2016. Luis, 2012, Recent developments in membrane-based technologies for CO2 capture, Progr Energy Combust Sci, 38, 419, 10.1016/j.pecs.2012.01.004 Kimball, 2014, Hollow fiber membrane contactors for CO2 capture: modeling and up-scaling to CO2 Capture for an 800 MWe coal power station, Oil Gas Sci Technol – Rev IFP Energies nouvelles, 69, 1047, 10.2516/ogst/2013165 Kuramochi, 2012, Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes, Progr Energy Combust Sci, 38, 87, 10.1016/j.pecs.2011.05.001 Thiruvenkatachari, 2009, Post combustion CO2 capture by carbon fibre monolithic adsorbents, Progr Energy Combust Sci, 35, 438, 10.1016/j.pecs.2009.05.003 Rezakazemi, 2017, Aluminum oxide nanoparticles for highly efficient asphaltene separation from crude oil using ceramic membrane technology, Oil & Gas Science and Technology - Rev IFP Energies nouvelles, 72, 34, 10.2516/ogst/2017031 Rezakazemi, 2017, High loaded synthetic hazardous wastewater treatment using lab-scale submerged ceramic membrane bioreactor, Periodica Polytechnica Chem Eng, 10.3311/PPch.11459 Rezakazemi, 2017, Hybrid systems: Combining membrane and absorption technologies leads to more efficient acid gases (CO2 and H2S) removal from natural gas, J CO2 Utilization, 18, 362, 10.1016/j.jcou.2017.02.006 Bhattacharjee, 2011, Oil Sands: A bridge between conventional petroleum and a sustainable energy future Cassidy, 1981, History of Heat-Resistant Polymers, J Macromol Sci, 15, 1435, 10.1080/00222338108056792 Cassidy, 1980 Arnold, 1979, Stability of high-temperature polymers, J Polymer Sci, 14, 265 Miller-Chou, 2003, A review of polymer dissolution, Prog Polym Sci, 28, 1223, 10.1016/S0079-6700(03)00045-5 Sadrzadeh, 2013, Rational design of phase inversion membranes by tailoring thermodynamics and kinetics of casting solution using polymer additives, J Membr Sci, 441, 31, 10.1016/j.memsci.2013.04.009 Dawsey, 1990, The Lithium Chloride/Dimethylacetamide Solvent for Cellulose: A Literature Review, J Macromol Sci,, 30, 405, 10.1080/07366579008050914 Striegel, 1997, Theory and applications of DMAC/LICL in the analysis of polysaccharides, Carbohydr Polym., 34, 267, 10.1016/S0144-8617(97)00101-X Scott, 2006 Gilleo, 1999, Pros and cons of thermoplastic and thermoset polymer adhesives in microelectronic assembly applications, Microelectron Int, 16, 34, 10.1108/13565369910268259 Rezakazemi, 2017, Methods for the Preparation of Organic–Inorganic Nanocomposite Polymer Electrolyte Membranes for Fuel Cells, 311 Sadrzadeh, 2018, Chapter 19 - Fundamentals and Measurement Techniques for Gas Transport in Polymers, 391 Rezakazemi, 2018, Chapter 13 - Separation via Pervaporation Techniques Through Polymeric Membranes, 243 Sadrzadeh, 2009, Gas permeation through a synthesized composite PDMS/PES membrane, J Membr Sci, 342, 236, 10.1016/j.memsci.2009.06.047 Mulder M. Basic principles of membrane technology. 1997. Rowe, 2010, Influence of temperature on the upper bound: Theoretical considerations and comparison with experimental results, J Membr Sci, 360, 58, 10.1016/j.memsci.2010.04.047 DWv, 2009 Merkel, 2012, Carbon dioxide capture with membranes at an IGCC power plant, J Membr Sci, 389, 441, 10.1016/j.memsci.2011.11.012 Ravve, 2000 Karimi-Varzaneh, 2008, Hydrogen Bonding and Dynamic Crossover in Polyamide-66: A Molecular Dynamics Simulation Study, Macromolecules, 41, 7211, 10.1021/ma8010685 Utracki, 2014, 2 - Characterization methods for high temperature polymer blends, 14 Minnesota Rubber and QMR Plastics; Online technical report, Section 5: Plastic & thermoplastic elastomer materials. 2003. Critchley, 1983 Gebben B. Thermally stable and chemically resistant polymer membranes : aromatic polyoxadiazoles and polytriazoles: University of Twente; 1988. Suleman, 2016, Plasticization and Swelling in Polymeric Membranes in CO2 Removal from Natural Gas, Chem Eng Technol, 39, 1604, 10.1002/ceat.201500495 Zhang, 2017, Theoretical modeling and simulations of self-assembly of copolymers in solution, Prog Polym Sci, 10.1016/j.progpolymsci.2017.04.003 Gebben, 1989, Gas separation properties of a thermally stable and chemically resistant polytriazole membrane, J Membr Sci, 46, 29, 10.1016/S0376-7388(00)81168-0 Stille, 1978, Polyquinolines: versatile aromatics with diverse properties, Pure Appl Chem, 50, 273, 10.1351/pac197850040273 Droske, 1984, Biphenylene end-capped polyquinoline prepolymers: synthesis, processing, and curing reactions, Macromolecules, 17, 1, 10.1021/ma00131a001 Hergenrother, 1981, Poly(phenylquinoxalines) containing ethynyl groups, Macromolecules, 14, 891, 10.1021/ma50005a001 Dhoot, 2004 Bessonov MM, Koton MM, Kudryavtsev VV, Laius LA. Polyimides: thermally stable polymers: Consultants Bureau, New York; 1987. Hergenrother, 1980, Acetylene-Containing Precursor Polymers, J Macromol Sci, 19, 1, 10.1080/00222358008081045 Hergenrother, 1987, Recent Advances in High Temperature Polymers, Polym J (Tokyo, Jpn), 19, 73, 10.1295/polymj.19.73 Menczel, 2009 Dean, 1995 Wunderlich, 1990 Meyers, 2007 Perez, 2013, Instrument for gas permeation measurements at high pressure and high temperature, Rev Sci Instrum, 84, 10.1063/1.4808285 Bains, 2017, CO2 capture from the industry sector, Progr Energy Combust Sci, 63, 146, 10.1016/j.pecs.2017.07.001 Rubin, 2012, The outlook for improved carbon capture technology, Progr Energy Combust Sci, 38, 630, 10.1016/j.pecs.2012.03.003 Jian, 1999, Preparation of UF and NF poly (phthalazine ether sulfone ketone) membranes for high temperature application, J Membr Sci, 161, 185, 10.1016/S0376-7388(99)00112-X Li, 1992, Gas separation by silicon based inorganic membrane at high temperature, J Membr Sci., 66, 119, 10.1016/0376-7388(92)87002-F Liu, 1990, Gas permeation behavior of phenolphthalein based heat-resistant polymers PEK-C and PES-C, J Membr Sci, 53, 203, 10.1016/0376-7388(90)80015-E Kathryn A. Berchtold RPS, Kevin W. Dudeck, Ganpat J. Dahe, Cynthia F. Welch, Dali Yang. High Temperature Polymer‐Based. Membrane Systems for Pre‐Combustion. Carbon Dioxide Capture. NETL CO2 Capture Technology Meeting. 2012. Franz, 2014, Economic evaluation of pre-combustion CO2-capture in IGCC power plants by porous ceramic membranes, Appl Energy, 130, 532, 10.1016/j.apenergy.2014.02.021 Makhloufi, 2013, Reverse selective NH3/CO2 permeation in fluorinated polymers using membrane gas separation, J Membr Sci, 441, 63, 10.1016/j.memsci.2013.03.048 Makhloufi, 2012, Interest of Poly[bis(trifluoroethoxy)phosphazene] membranes for Ammonia recovery–Potential application in Haber process, Procedia Eng, 44, 143, 10.1016/j.proeng.2012.08.338 Kourtides, 1979, Thermochemical characterization of some thermally stable thermoplastic and thermoset polymers, Polym Eng Sci, 19, 24, 10.1002/pen.760190105 McGrail PT. Polyaromatics. Polym Int. 1996;41:103–21. Warfield, 1961, Method for studying thermal stability of bulk thermosetting polymers, Nature, 189, 1002, 10.1038/1891002a0 Chang, 1988, Recent development in thermoplastic composites: A review of matrix systems and processing methods, J Thermoplastic Compos Materials, 1, 277, 10.1177/089270578800100305 Gilman, 2002, Polymer/layered silicate nanocomposites from thermally stable Trialkylimidazolium-treated montmorillonite, Chem Mater, 14, 3776, 10.1021/cm011532x Sasaki, 2005, High thermal stable thermoplastic–thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA), Polymer, 46, 6968, 10.1016/j.polymer.2005.06.052 Gilman, 1999, Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites, Appl Clay Sci, 15, 31, 10.1016/S0169-1317(99)00019-8 Beyler CL, Hirschler MM. Thermal decomposition of polymers. SFPE handbook of fire protection engineering 2002. Hou, 1996, Processing and properties of IM7/PETI composites, Journal of Composite Materials, 30, 109, 10.1177/002199839603000107 Shi, 2000, Thermo-processable polyimides with high thermo-oxidative stability as derived from Oxydiphthalic Anhydride and Bisphenol a type Dianhydride, High Perform Polym, 12, 377, 10.1088/0954-0083/12/3/302 Meyer, 1995, New high-performance thermosetting polymer matrix material systems, Polymer, 36, 2303, 10.1016/0032-3861(95)95311-N Tamai, 1996, Melt processible polyimides and their chemical structures, Polymer, 37, 3683, 10.1016/0032-3861(96)00178-4 Singh, 2014, High temperature Polybenzimidazole hollow fiber membranes for Hydrogen separation and Carbon Dioxide capture from synthesis Gas, Energy Procedia, 63, 153, 10.1016/j.egypro.2014.11.015 Aili, 2012, Thermal curing of PBI membranes for high temperature PEM fuel cells, J Mater Chem, 22, 5444, 10.1039/c2jm14774b Lau, 2014, 10 - High-performance Polyimides and high temperature resistant polymers, 297 Wang, 2013, Silane-cross-linked polybenzimidazole with improved conductivity for high temperature proton exchange membrane fuel cells, J Mater Chem A, 1, 621, 10.1039/C2TA00216G Zaikov, 1993, Some aspects of polymer pyrolysis, Makromolekulare Chemie Macromolecular Symposia, 74, 21, 10.1002/masy.19930740105 Nyden, 1992, Molecular modeling of polymer flammability: application to the design of flame-resistant polyethylene, Macromolecules, 25, 1658, 10.1021/ma00032a007 Liu, 2007, Thermally reversible cross-linked polyamides with high toughness and self-repairing ability from Maleimide- and Furan-functionalized Aromatic Polyamides, Macromol Chem Phys, 208, 224, 10.1002/macp.200600445 Schnabel, 1999, Thermal degradation of polystyrene, poly(1,4-butadiene) and copolymers of styrene and 1,4-butadiene irradiated under air or argon with 60Co-γ-rays, Polym Degrad Stab, 63, 365, 10.1016/S0141-3910(98)00114-1 Levchik, 1999, The correlation between cross-linking and thermal stability: Cross-linked polystyrenes and polymethacrylates, Polym Degrad Stab, 65, 395, 10.1016/S0141-3910(99)00028-2 Nielsen, 1969, Cross-Linking–Effect on Physical Properties of Polymers, J Macromol Sci, 3, 69, 10.1080/15583726908545897 Gillham, 1963, Polymer Structure: Cross-Linking of a Polybenzimidazole, Science, 139, 494, 10.1126/science.139.3554.494 Noyé, 2008, Cross-linked polybenzimidazole membranes for high temperature proton exchange membrane fuel cells with dichloromethyl phosphinic acid as a cross-linker, Polym Adv Technol, 19, 1270, 10.1002/pat.1123 Li, 2007, Cross-Linked Polybenzimidazole membranes for fuel cells, Chem Mater, 19, 350, 10.1021/cm0627793 Wang, 2011, Novel epoxy-based cross-linked polybenzimidazole for high temperature proton exchange membrane fuel cells, Int J Hydrogen Energy, 36, 8412, 10.1016/j.ijhydene.2011.03.147 Shen, 2013, Synthesis of novel cross-linked polybenzimidazole membranes for high temperature proton exchange membrane fuel cells, J Membr Sci, 443, 138, 10.1016/j.memsci.2013.04.072 Han, 2011, Cross-linked polybenzimidazole with enhanced stability for high temperature proton exchange membrane fuel cells, J Mater Chem, 21, 2187, 10.1039/C0JM02443K Overberger, 1970, 113 Schlüter A-D. Ladder Polymers: The new generation. Adv Mater (Weinheim, Ger). 1991;3:282–91. Dhara, 2010, Fluorinated high-performance polymers: Poly(arylene ether)s and aromatic polyimides containing trifluoromethyl groups, Prog Polym Sci, 35, 1022, 10.1016/j.progpolymsci.2010.04.003 Souzy, 2005, Functional fluoropolymers for fuel cell membranes, Prog Polym Sci, 30, 644, 10.1016/j.progpolymsci.2005.03.004 Xu, 2002, Gas Separation Properties of Polymers Containing Fluorene Moieties, Chem Mater, 14, 3271, 10.1021/cm0112789 Xu, 2002, Novel poly(arylene ether) as membranes for gas separation, J Membr Sci, 205, 23, 10.1016/S0376-7388(02)00045-5 Pixton, 1995, Gas transport properties of polyarylates part I: Connector and pendant group effects, J Polym Sci, Part B: Polym Phys, 33, 1135, 10.1002/polb.1995.090330717 Dasgupta, 2009, Gas transport properties of fluorinated poly(ether imide) membranes containing indan moiety in the main chain, J Membr Sci, 345, 249, 10.1016/j.memsci.2009.09.007 Sen, 2009, Effect of introduction of heterocyclic moieties into polymer backbone on gas transport properties of fluorinated poly(ether imide) membranes, J Membr Sci, 343, 97, 10.1016/j.memsci.2009.07.014 Sen, 2010, Gas transport properties of fluorinated poly(ether imide) films containing phthalimidine moiety in the main chain, J Membr Sci, 350, 53, 10.1016/j.memsci.2009.12.011 Kazama, 2002, Carbon dioxide and nitrogen transport properties of bis(phenyl)fluorene-based cardo polymer membranes, J Membr Sci, 207, 91, 10.1016/S0376-7388(02)00112-6 Chun, 1994, Characterization and gas permeability of a three-component polyimide series, J Polym Sci, Part B: Polym Phys, 32, 1009, 10.1002/polb.1994.090320606 Langsam, 1993, Effects of diamine monomer structure on the gas permeability of polyimides. I. Bridged diamines, Journal of Polymer Science Part A: Polymer Chemistry, 31, 909, 10.1002/pola.1993.080310409 Kazama, 2004, Gas separation properties and morphology of asymmetric hollow fiber membranes made from cardo polyamide, J Membr Sci, 243, 59, 10.1016/j.memsci.2004.06.012 Al-Masri, 1999, New Polyimides for Gas Separation. 1. Polyimides Derived from Substituted Terphenylenes and 4,4‘-(Hexafluoroisopropylidene)diphthalic Anhydride, Macromolecules., 32, 7853, 10.1021/ma9910742 Schönberger, 2007, Preparation and characterisation of sulfonated partially fluorinated statistical poly(arylene ether sulfone)s and their blends with PBI, Solid State Ionics, 178, 547, 10.1016/j.ssi.2007.01.003 Liew, 2016, Ceramic and inorganic polymer membranes: Preparation, characterization and applications, 89 Li, 1988, Gas permeability of high-temperature-resistant silicone polymer-vycor glass membrane, J Membr Sci, 37, 267, 10.1016/S0376-7388(00)82433-3 Hwang S-T, Li D, Seok DR. Process for preparation of heterogeneous polysiloxane membrane and membrane produced. US Patent 48285881989. Li, 1991, Preparation and characterization of silicon based inorganic membrane for gas separation, J Membr Sci, 59, 331, 10.1016/S0376-7388(00)80821-2 Raharjo, 2007, Pure and mixed gas CH4 and n-C4H10 sorption and dilation in poly(dimethylsiloxane), J Membr Sci, 292, 45, 10.1016/j.memsci.2007.01.012 Merkel, 2001, Mixed-gas permeation of syngas components in poly(dimethylsiloxane) and poly(1-trimethylsilyl-1-propyne) at elevated temperatures, J Membr Sci, 191, 85, 10.1016/S0376-7388(01)00452-5 Sadrzadeh, 2009, Effect of operating parameters on pure and mixed gas permeation properties of a synthesized composite PDMS/PA membrane, J Membr Sci, 342, 327, 10.1016/j.memsci.2009.07.015 Rezakazemi, 2015, Synthetic PDMS composite membranes for pervaporation dehydration of ethanol, Desalin. Water Treat., 54, 1542 Rezakazemi, 2013, Gas sorption in H2-selective mixed matrix membranes: Experimental and neural network modeling, Int J Hydrogen Energy, 38, 14035, 10.1016/j.ijhydene.2013.08.062 Rezakazemi, 2012, Hydrogen separation and purification using crosslinkable PDMS/zeolite A nanoparticles mixed matrix membranes, Int J Hydrogen Energy, 37, 14576, 10.1016/j.ijhydene.2012.06.104 Rezakazemi, 2012, Sorption properties of hydrogen-selective PDMS/zeolite 4A mixed matrix membrane, Int J Hydrogen Energy, 37, 17275, 10.1016/j.ijhydene.2012.08.109 Rostamizadeh, 2013, Gas permeation through H2-selective mixed matrix membranes: Experimental and neural network modeling, Int J Hydrogen Energy, 38, 1128, 10.1016/j.ijhydene.2012.10.069 Farno, 2014, Ternary gas permeation through synthesized pdms membranes: Experimental and CFD simulation basedon sorption-dependent system using neural network model, Polym Eng Sci, 54, 215, 10.1002/pen.23555 Rezakazemi, 2017, H2-selective mixed matrix membranes modeling using ANFIS, PSO-ANFIS, GA-ANFIS, Int J Hydrogen Energy, 42, 15211, 10.1016/j.ijhydene.2017.04.044 Li, 1992, Pyrolysis kinetics of highly crosslinked polymethylsiloxane by TGA, J Appl Polym Sci, 44, 1979, 10.1002/app.1992.070441113 Strathmann H. Polymer Gas Separation Membranes. R.E. Kesting. A.K. Fritzsche John Wiley & Sons, Inc., New York, N.Y. (1994) XI + 416 pp., £66.00. ISBN 0-471-56931-3. Recueil des Travaux Chimiques des Pays-Bas. 1995;114:299-. Golemme, 1996, Polyphosphazene membrane separations—Review, J Inorg Organomet Polym, 6, 341, 10.1007/BF01062514 Allen CA, McCaffrey RR, Cummings DG, Grey AE, Jessup JS, McAtee RE. Polyphosphazene semipermeable membranes. US Patent 47494891988. Allcock, 1993, Gas permeation and selectivity of poly(organophosphazene) membranes, Macromolecules, 26, 1493, 10.1021/ma00059a003 Tang, 1999, Polyphosphazene membranes. III. Solid-state characterization and properties of sulfonated poly[bis(3-methylphenoxy)phosphazene], J Appl Polym Sci., 71, 387, 10.1002/(SICI)1097-4628(19990118)71:3<387::AID-APP4>3.0.CO;2-Y Wycisk, 1996, Polyphosphazene membranes. I. Solid-state photocrosslinking of poly[(4-ethylphenoxy)-(phenoxy)phosphazene], J Appl Polym Sci., 59, 1607, 10.1002/(SICI)1097-4628(19960307)59:10<1607::AID-APP13>3.0.CO;2-T Drioli, 1991, Gas permeability of polyphosphazene membranes, Gas Sep Purif, 5, 252, 10.1016/0950-4214(91)80033-2 Orme, 2002, Pervaporation of water–dye, alcohol–dye, and water–alcohol mixtures using a polyphosphazene membrane, J Membr Sci, 197, 89, 10.1016/S0376-7388(01)00633-0 Stewart, 2000, Synthesis, characterization and thermal stability of phosphazene terpolymers with 2-(2-methoxyethoxy)ethoxy and diacetone d-glucofuranosyl pendant groups, Polym Int, 49, 57, 10.1002/(SICI)1097-0126(200001)49:1<57::AID-PI295>3.0.CO;2-Q Gaeta, 1991, Polyorganophosphazene membranes: preparation and transport properties, Desalination, 80, 181, 10.1016/0011-9164(91)85157-P Kajiwara, 1991, Gas Permeability and Selectivity of Poly(Organophosphazene) Membranes, Sep Sci Technol, 26, 841, 10.1080/01496399108050500 Nagai, 2000, Gas permeability of poly(bis-trifluoroethoxyphosphazene) and blends with adamantane amino/trifluoroethoxy (50/50) polyphosphazene, J Membr Sci, 172, 167, 10.1016/S0376-7388(00)00333-1 Orme, 2001, Characterization of gas transport in selected rubbery amorphous polyphosphazene membranes, J Membr Sci, 186, 249, 10.1016/S0376-7388(00)00690-6 Orme, 2005, Mixed gas hydrogen sulfide permeability and separation using supported polyphosphazene membranes, J Membr Sci, 253, 243, 10.1016/j.memsci.2004.12.034 Sun, 1999, Sorption and permeation properties of water and ethanol vapors in poly[bis(trifluoroethoxy)phosphazene] (PTFEP) membranes, J Polym Res, 6, 91, 10.1007/s10965-006-0075-2 McCaffrey, 1988, Gas Separation Properties of Phosphazene Polymer Membranes, Sep Sci Technol, 23, 1627, 10.1080/01496398808075653 Hirose, 1991, Gas transport in poly(alkoxyphosphazenes), J Appl Polym Sci, 43, 891, 10.1002/app.1991.070430506 Masuda, 1990, Synthesis and properties of poly[1-(n-alkylthio)-1-propynes], Macromolecules, 23, 4902, 10.1021/ma00225a003 Wisian-Neilson, 1996, Gas Permeation Studies of Silylated Derivatives of Poly(methylphenylphosphazene), Macromolecules, 29, 3457, 10.1021/ma950788j Orme, 2004, Gas permeability and ideal selectivity of poly[bis-(phenoxy)phosphazene], poly[bis-(4-tert-butylphenoxy)phosphazene], and poly[bis-(3,5-di-tert-butylphenoxy)1.2(chloro)0.8phosphazene], J Membr Sci, 238, 47, 10.1016/j.memsci.2004.02.032 Ostwal, 2009, The influence of temperature on the sorption and permeability of CO2 in poly(fluoroalkoxyphosphazene) membranes, J Membr Sci, 344, 199, 10.1016/j.memsci.2009.08.002 Muldoon, 2009, Synthesis, characterization, and gas permeability of a series of 4-phenylphenoxy/phenoxy substituted polyphosphazene membranes, J Membr Sci, 334, 74, 10.1016/j.memsci.2009.02.016 Petersen, 1997, Novel polyamide composite membranes for gas separation prepared by interfacial polycondensation, J Appl Polym Sci, 63, 1557, 10.1002/(SICI)1097-4628(19970321)63:12<1557::AID-APP6>3.0.CO;2-N Sridhar, 2007, Gas permeation properties of polyamide membrane prepared by interfacial polymerization, J Mater Sci, 42, 9392, 10.1007/s10853-007-1813-5 Li, 2013, Interfacially polymerized thin film composite membranes containing ethylene oxide groups for CO2 separation, J Membr Sci, 436, 121, 10.1016/j.memsci.2013.02.038 Jo, 2016, CO2/CH4 separation using inside coated thin film composite hollow fiber membranes prepared by interfacial polymerization, Chin J Chem Eng Albo, 2014, Gas transport properties of interfacially polymerized polyamide composite membranes under different pre-treatments and temperatures, J Membr Sci, 449, 109, 10.1016/j.memsci.2013.08.026 García, 2010, High-performance aromatic polyamides, Prog Polym Sci, 35, 623, 10.1016/j.progpolymsci.2009.09.002 Espeso, 2006, Effect of substituents on the permeation properties of polyamide membranes, J Membr Sci, 280, 659, 10.1016/j.memsci.2006.02.023 Bisoi, 2017, Aromatic polyamides containing trityl substituted triphenylamine: Gas transport properties and molecular dynamics simulations, J Membr Sci, 522, 77, 10.1016/j.memsci.2016.09.007 McHattie, 1991, Gas transport properties of polysulphones: 1. Role of symmetry of methyl group placement on bisphenol rings, Polymer., 32, 840, 10.1016/0032-3861(91)90508-G McHattie, 1991, Gas transport properties of polysulphones: 2. Effect of bisphenol connector groups, Polymer., 32, 2618, 10.1016/0032-3861(91)90343-H McHattie, 1992, Gas transport properties of polysulphones: 3. Comparison of tetramethyl-substituted bisphenols, Polymer., 33, 1701, 10.1016/0032-3861(92)91070-I Aitken, 1992, Gas transport properties of biphenol polysulfones, Macromolecules, 25, 3651, 10.1021/ma00040a008 Aitkin, 1993, Gas transport properties of polysulfones based on dihydroxynaphthalene isomers, J Polym Sci, Part B: Polym Phys, 31, 1061, 10.1002/polb.1993.090310816 Aitken, 1992, Effect of structural symmetry on gas transport properties of polysulfones, Macromolecules, 25, 3424, 10.1021/ma00039a018 Aguilar-Vega, 1993, Gas transport properties of polycarbonates and polysulfones with aromatic substitutions on the bisphenol connector group, J Polym Sci, Part B: Polym Phys, 31, 1599, 10.1002/polb.1993.090311116 Karatay, 2010, Preparation and performance assessment of binary and ternary PES-SAPO 34-HMA based gas separation membranes, J Membr Sci, 364, 75, 10.1016/j.memsci.2010.08.004 Amirilargani, 2009, Synthesis and characterization of polyethersulfone membranes, J Polym Res, 17, 363, 10.1007/s10965-009-9323-6 Amirilargani, 2010, Improvement of permeation performance of polyethersulfone (PES) ultrafiltration membranes via addition of Tween-20, J Appl Polym Sci, 115, 504, 10.1002/app.30814 Amirilargani, 2010, Effects of coagulation bath temperature and polyvinylpyrrolidone content on flat sheet asymmetric polyethersulfone membranes, Polym Eng Sci, 50, 885, 10.1002/pen.21603 Chakrabarty, 2008, Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive, J Membr Sci, 315, 36, 10.1016/j.memsci.2008.02.027 Han, 2002, Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane, J Membr Sci, 202, 55, 10.1016/S0376-7388(01)00718-9 Kim, 1998, Effect of PEG additive on membrane formation by phase inversion, J Membr Sci, 138, 153, 10.1016/S0376-7388(97)00224-X Sadrzadeh, 2009, Gas permeation through a synthesized composite PDMS/PES membrane, J Membr Sci, 342, 236, 10.1016/j.memsci.2009.06.047 Zheng, 2006, Rheological and thermodynamic variation in polysulfone solution by PEG introduction and its effect on kinetics of membrane formation via phase-inversion process, J Membr Sci, 279, 230, 10.1016/j.memsci.2005.12.009 Ahmad, 2013, Recent development in additives modifications of polyethersulfone membrane for flux enhancement, Chem Eng J, 223, 246, 10.1016/j.cej.2013.02.130 Vilakati, 2014, Probing the mechanical and thermal properties of polysulfone membranes modified with synthetic and natural polymer additives, Polym Test, 34, 202, 10.1016/j.polymertesting.2014.01.014 Oh, 2014, Thermal analysis of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation, Polymer, 55, 235, 10.1016/j.polymer.2013.11.041 Aslan, 2014, Nanocomposite membranes based on sulfonated polysulfone and sulfated nano-titania/NMPA for proton exchange membrane fuel cells, Solid State Ionics, 255, 89, 10.1016/j.ssi.2013.11.054 Cheng, 2014, Preparation and performance of polymer electrolyte based on poly(vinylidene fluoride)/polysulfone blend membrane via thermally induced phase separation process for lithium ion battery, J Power Sources, 266, 401, 10.1016/j.jpowsour.2014.05.056 Huang, 2012, Effect of silver loaded sodium zirconium phosphate (nanoAgZ) nanoparticles incorporation on PES membrane performance, Desalination, 285, 100, 10.1016/j.desal.2011.09.040 Huang, 2012, Fabrication of polyethersulfone-mesoporous silica nanocomposite ultrafiltration membranes with antifouling properties, J Membr Sci, 423-424, 362, 10.1016/j.memsci.2012.08.029 Liang, 2012, A comparison on gas separation between PES (polyethersulfone)/MMT (Na-montmorillonite) and PES/TiO2 mixed matrix membranes, Sep Purif Technol, 92, 57, 10.1016/j.seppur.2012.03.016 Rafiq, 2012, Separation of CO2 from CH4 using polysulfone/polyimide silica nanocomposite membranes, Sep Purif Technol, 90, 162, 10.1016/j.seppur.2012.02.031 Wahab, 2012, Studies on gas permeation performance of asymmetric polysulfone hollow fiber mixed matrix membranes using nanosized fumed silica as fillers, Sep Purif Technol, 86, 41, 10.1016/j.seppur.2011.10.018 Ismail, 2011, Gas separation performance of polyethersulfone/multi-walled carbon nanotubes mixed matrix membranes, Sep Purif Technol, 80, 20, 10.1016/j.seppur.2011.03.031 Rahimpour, 2008, Synthesis of a novel poly(amide-imide) (PAI) and preparation and characterization of PAI blended polyethersulfone (PES) membranes, J Membr Sci, 311, 349, 10.1016/j.memsci.2007.12.038 Kim, 2011, Gas diffusivity, solubility and permeability in polysulfone–poly(ethylene oxide) random copolymer membranes, J Membr Sci, 372, 116, 10.1016/j.memsci.2011.01.053 Bondar, 2000, Gas Transport Properties of Poly (ether-b-amide) Segmented, J Polym Sci, Part B: Polym Phys, 38, 2051, 10.1002/1099-0488(20000801)38:15<2051::AID-POLB100>3.0.CO;2-D Munoz, 2008, Thermal treatment of poly(ethylene oxide)-segmented copolyimide based membranes: An effective way to improve the gas separation properties, J Membr Sci, 323, 53, 10.1016/j.memsci.2008.06.036 Park, 2008, Highly chlorine-tolerant polymers for desalination, Angewandte Chemie (International ed in English), 47, 6019, 10.1002/anie.200800454 Li, 2008, Highly selective sulfonated polyethersulfone (SPES)-based membranes with transition metal counterions for hydrogen recovery and natural gas separation, J Membr Sci, 308, 128, 10.1016/j.memsci.2007.09.053 Li, 2005, Sulfonated polyethersulfone Cardo membranes for direct methanol fuel cell, J Membr Sci, 246, 167, 10.1016/j.memsci.2004.08.015 Kim, 2013, Crosslinked SPES-SPPSU membranes for high temperature PEMFCs, Int J Hydrogen Energy, 38, 1517, 10.1016/j.ijhydene.2012.10.110 Chul Gil, 2012, Thermally crosslinked sulfonated polyethersulfone proton exchange membranes for direct methanol fuel cells, J Membr Sci, 417-418, 2, 10.1016/j.memsci.2012.05.064 Di Vona, 2010, High ionic exchange capacity polyphenylsulfone (SPPSU) and polyethersulfone (SPES) cross-linked by annealing treatment: Thermal stability, hydration level and mechanical properties, J Membr Sci, 354, 134, 10.1016/j.memsci.2010.02.058 Mabrouk, 2014, Ion exchange membranes based upon crosslinked sulfonated polyethersulfone for electrochemical applications, J Membr Sci, 452, 263, 10.1016/j.memsci.2013.10.006 Ding, 2006, Preparation of Porous Structure in the System of PEEK / PPS / Diphenyl Ketone Via Thermally Induced Phase Separation, J Appl Polym Sci, 104, 1523, 10.1002/app.25390 Mehta, 1995, Microporous membranes based on poly(ether ether ketone) via thermally-induced phase separation, J Membr Sci, 107, 93, 10.1016/0376-7388(95)00106-M Beck, 1992, Solubility characteristics of poly(etheretherketone) and poly(phenylene sulfide), J Appl Polym Sci, 45, 1361, 10.1002/app.1992.070450806 Apparatus, 1992, Separation of small molecules using novel rolltruded membranes. I. Apparatus and preliminary results, J Polym Sci, Part B: Polym Phys., 30, 1035, 10.1002/polb.1992.090300911 Sonnenschein, 1998, Hollow fiber microfiltration membranes from poly (ether ether ketone) (PEEK), J Appl Polym Sci, 72, 175, 10.1002/(SICI)1097-4628(19990411)72:2<175::AID-APP3>3.0.CO;2-H Vigo, 2001, Poly (ether ether ketone) Solutions Suitable for Microfiltration Membrane Preparation, J Appl Polym Sci, 81, 2550, 10.1002/app.1696 Yang, 2008, Preparation of Asymmetric Polyetherketone Flat and Hollow Fiber Membranes for Gas Separation Using Acetic Acid Based Coagulants, Chin J Polym Sci, 26, 263, 10.1142/S0256767908002911 Buonomenna, 2009, Preparation, characterization and use of PEEKWC nanofiltration membranes for removal of Azur B dye from aqueous media, React Funct Polymers, 69, 259, 10.1016/j.reactfunctpolym.2009.01.004 Jansen, 2006, Ultra-thin asymmetric gas separation membranes of modified PEEK prepared by the dry – wet phase inversion technique, Desalination, 193, 58, 10.1016/j.desal.2005.09.024 Chen, 2008, Composite membranes prepared from glutaraldehyde cross-linked sulfonated cardo polyetherketone and its blends for the dehydration of acetic acid by pervaporation, J Membr Sci, 325, 184, 10.1016/j.memsci.2008.07.027 Chen, 2008, Dehydration of acetic acid using sulfonation cardo polyetherketone (SPEK-C) membranes, J Membr Sci, 308, 171, 10.1016/j.memsci.2007.09.058 Qiu, 2007, Surface modification of cardo polyetherketone ultrafiltration membrane by photo-grafted copolymers to obtain nanofiltration membranes, J Membr Sci, 295, 88, 10.1016/j.memsci.2007.02.040 Qiu, 2006, Nanofiltration membrane preparation by photomodification of cardo polyetherketone ultrafiltration membrane, Sep Purif Technol, 51, 325, 10.1016/j.seppur.2006.02.012 Carbone, 2008, Investigation on composite S-PEEK/H-BETA MEAs for medium temperature PEFC, Int J Hydrogen Energy, 33, 3153, 10.1016/j.ijhydene.2008.01.029 Che, 2010, Phosphoric acid doped high temperature proton exchange membranes based on sulfonated polyetheretherketone incorporated with ionic liquids, Electrochem Commun, 12, 647, 10.1016/j.elecom.2010.02.021 Ding, 2010, Preparation and characterization of semi-crystalline poly(ether ether ketone) hollow fiber membranes, J Membr Sci, 357, 192, 10.1016/j.memsci.2010.04.021 Frazer, 1969 Mark, 2007 Kim, 2012, Pendant-sulfonated poly(arylene ether ketone) (PAEK) membranes cross-linked with a proton conducting reagent for fuel cells, J Membr Sci, 405-406, 176, 10.1016/j.memsci.2012.03.007 Shang, 2007, Synthesis and characterization of poly(arylene ether ketone) with sulfonated fluorene pendants for proton exchange membrane, J Membr Sci, 297, 90, 10.1016/j.memsci.2007.03.014 Zhu, 2012, SPAEK-based binary blends and ternary composites as proton exchange membranes for DMFCs, J Membr Sci, 415-416, 520, 10.1016/j.memsci.2012.05.039 Li, 2005, Preparation of a new type of ion-exchange membrane based on sulfonated poly(ether ether ketone ketone)s, J Appl Polym Sci, 98, 2481, 10.1002/app.22456 Di Vona, 2006, SPEEK/PPSU-based organic–inorganic membranes: proton conducting electrolytes in anhydrous and wet environments, J Membr Sci, 279, 186, 10.1016/j.memsci.2005.12.003 Di Vona, 2008, Synthetic strategies for the preparation of proton-conducting hybrid polymers based on PEEK and PPSU for PEM fuel cells, C R Chim, 11, 1074, 10.1016/j.crci.2008.06.001 Kalamaras, 2012, Thermal crosslinking of aromatic polyethers bearing pyridine groups for use as high temperature polymer electrolytes, J Membr Sci, 415-416, 42, 10.1016/j.memsci.2012.04.057 Kourasi, 2014, Heteropolyacids for fuel cell applications, Electrochim Acta, 127, 454, 10.1016/j.electacta.2014.02.006 Wright, 1975 Marrony, 2008, Durability study and lifetime prediction of baseline proton exchange membrane fuel cell under severe operating conditions, J Power Sources, 182, 469, 10.1016/j.jpowsour.2008.02.096 Hassan, 2013, Synthesis and characterization of thermally stable aromatic polyamides and poly(1,3,4-oxadiazole-amide)s nanoparticles containing pendant substituted bezamides, Chemistry Central Journal, 7, 1, 10.1186/1752-153X-7-13 Maya, 2012, Effect of the carboxylic acid groups on water sorption, thermal stability and dielectric properties of polyimide films, Mater Chem Phys, 131, 581, 10.1016/j.matchemphys.2011.10.018 Wang, 2014, Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries, Electrochim Acta, 132, 538, 10.1016/j.electacta.2014.04.053 Chen, 2011, Plasticization-resistant hollow fiber membranes for CO2/CH4 separation based on a thermally crosslinkable polyimide, J Membr Sci, 382, 212, 10.1016/j.memsci.2011.08.015 Wang, 2012, Preparation and properties of pore-filling membranes based on sulfonated copolyimides and porous polyimide matrix, Polymer, 53, 3154, 10.1016/j.polymer.2012.05.049 Ba, 2010, Preparation of PMDA/ODA polyimide membrane for use as substrate in a thermally stable composite reverse osmosis membrane, J Membr Sci, 363, 140, 10.1016/j.memsci.2010.07.019 Wang, 2013, Preparation of thermal stable porous polyimide membranes by phase inversion process for lithium-ion battery, Polymer, 54, 6339, 10.1016/j.polymer.2013.09.036 Hong, 2013, Interfacially synthesized chlorine-resistant polyimide thin film composite (TFC) reverse osmosis (RO) membranes, Desalination, 309, 18, 10.1016/j.desal.2012.09.025 Jang, 2007, Characterizations and stability of polyimide–phosphotungstic acid composite electrolyte membranes for fuel cell, Polym Degrad Stab, 92, 1289, 10.1016/j.polymdegradstab.2007.03.022 Bai, 2008, New poly(ethylene oxide) soft segment-containing sulfonated polyimide copolymers for high temperature proton-exchange membrane fuel cells, J Membr Sci, 313, 75, 10.1016/j.memsci.2007.12.062 Pu, 2009, Studies on anhydrous proton conducting membranes based on imidazole derivatives and sulfonated polyimide, Electrochim Acta, 54, 2603, 10.1016/j.electacta.2008.10.057 Yin, 2011, Sulfonated polyimides with flexible aliphatic side chains for polymer electrolyte fuel cells, J Membr Sci, 367, 211, 10.1016/j.memsci.2010.10.054 Sun, 2010, Synthesis and characterization of sulfonated polyimides bearing sulfonated aromatic pendant group for DMFC applications, Polymer, 51, 3887, 10.1016/j.polymer.2010.06.005 Jang, 2005, Thermal and hydrolytic stability of sulfonated polyimide membranes with varying chemical structure, Polym Degrad Stab, 90, 431, 10.1016/j.polymdegradstab.2005.04.012 Kim, 1988, Relationship between gas separation properties and chemical structure in a series of aromatic polyimides, J Membr Sci, 37, 45, 10.1016/S0376-7388(00)85068-1 Coleman, 1990, Isomeric polyimides based on fluorinated dianhydrides and diamines for gas separation applications, J Membr Sci, 50, 285, 10.1016/S0376-7388(00)80626-2 Yamamoto, 1990, Structure/permeability relationships of polyimide membranes, II. J Polym Sci, Part B: Polym Phys., 28, 2291, 10.1002/polb.1990.090281210 Stern, 1989, Structure/permeability relationships of polyimide membranes. Applications to the separation of gas mixtures, J Polym Sci, Part B: Polym Phys., 27, 1887, 10.1002/polb.1989.090270908 Tanaka, 1992, Permeability and permselectivity of gases in fluorinated and non-fluorinated polyimides, Polymer, 33, 585, 10.1016/0032-3861(92)90736-G Walker, 1991, Transport characterization of a polypyrrolone for gas separations, J Membr Sci, 55, 99, 10.1016/S0376-7388(00)82329-7 Costello, 1995, Thermally stable polyimide isomers for membrane-based gas separations at elevated temperatures, J Polym Sci, Part B: Polym Phys, 33, 135, 10.1002/polb.1995.090330114 Bi, 2010, Preparation and properties of cross-linked sulfonated poly(arylene ether sulfone)/sulfonated polyimide blend membranes for fuel cell application, J Membr Sci, 350, 109, 10.1016/j.memsci.2009.12.017 Garg, 2011, Selective polydimethylsiloxane/polyimide blended IPN pervaporation membrane for methanol/toluene azeotrope separation, Sep Purif Technol, 76, 407, 10.1016/j.seppur.2010.11.012 Tsai, 2008, Characteristics and properties of polyimide/vanadium oxide hybrid membranes, Desalination, 233, 232, 10.1016/j.desal.2007.10.040 Geng, 2012, Facile in situ template synthesis of sulfonated polyimide/mesoporous silica hybrid proton exchange membrane for direct methanol fuel cells, Microporous Mesoporous Mater, 148, 8, 10.1016/j.micromeso.2011.07.010 Lin, 2012, Sulfur removal from fuel using zeolites/polyimide mixed matrix membrane adsorbents, J Hazard Mater, 203–204, 204, 10.1016/j.jhazmat.2011.12.015 Chua, 2014, Using iron (III) acetylacetonate as both a cross-linker and micropore former to develop polyimide membranes with enhanced gas separation performance, Sep Purif Technol, 133, 120, 10.1016/j.seppur.2014.06.039 He, 2014, Enhanced performance of the sulfonated polyimide proton exchange membranes by graphene oxide: Size effect of graphene oxide, J Membr Sci, 458, 36, 10.1016/j.memsci.2014.01.017 Gallucci RR, Malinoski JM. Stabilization of polyetherimide sulfones. US Patent 74110142008. Ma, 2004, Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells, J Electrochem Soc, 151, A8, 10.1149/1.1630037 Li, 2014, Influence of Polybenzimidazole main chain structure on H2/CO2 separation at elevated temperatures, J Membr Sci, 461, 59, 10.1016/j.memsci.2014.03.008 Li X, Singh RP, Dudeck KW, Berchtold KA, Benicewicz BC. Polybenzimidazole (PBI)-based membrane materials for high temperature H2/CO2 separation2013. He, 2006, Physicochemical properties of phosphoric acid doped polybenzimidazole membranes for fuel cells, J Membr Sci, 277, 38, 10.1016/j.memsci.2005.10.005 Li, 2009, High temperature proton exchange membranes based on polybenzimidazoles for fuel cells, Prog Polym Sci, 34, 449, 10.1016/j.progpolymsci.2008.12.003 Pesiri, 2003, Thermal optimization of polybenzimidazole meniscus membranes for the separation of hydrogen, methane, and carbon dioxide, J Membr Sci, 218, 11, 10.1016/S0376-7388(03)00129-7 Choi, 2008, Fabrication and gas separation properties of polybenzimidazole (PBI)/nanoporous silicates hybrid membranes, J Membr Sci, 316, 145, 10.1016/j.memsci.2007.09.026 Wang, 2012, Sulfonated polybenzimidazole membranes for pervaporation dehydration of acetic acid, J Membr Sci, 415–416, 486, 10.1016/j.memsci.2012.05.035 Berchtold, 2012, Polybenzimidazole composite membranes for high temperature synthesis gas separations, J Membr Sci, 415–416, 265, 10.1016/j.memsci.2012.05.005 Kumbharkar, 2011, High performance polybenzimidazole based asymmetric hollow fibre membranes for H2/CO2 separation, J Membr Sci, 375, 231, 10.1016/j.memsci.2011.03.049 Kumbharkar, 2006, Enhancement of gas permeation properties of polybenzimidazoles by systematic structure architecture, J Membr Sci, 286, 161, 10.1016/j.memsci.2006.09.030 Sadeghi, 2009, Enhancement of the gas separation properties of polybenzimidazole (PBI) membrane by incorporation of silica nano particles, J Membr Sci, 331, 21, 10.1016/j.memsci.2008.12.073 Wang, 2010, Pervaporation dehydration of ethylene glycol through polybenzimidazole (PBI)-based membranes. 1. Membrane fabrication, J Membr Sci., 363, 149, 10.1016/j.memsci.2010.07.024 Rezakazemi, 2011, CFD simulation of water removal from water/ethylene glycol mixtures by pervaporation, Chem Eng J, 168, 60, 10.1016/j.cej.2010.12.034 Seel, 2010, High-temperature polybenzimidazol-based membranes Dai, 2002, Thin film composite (TFC) membranes with improved thermal stability from sulfonated poly(phthalazinone ether sulfone ketone) (SPPESK), J Membr Sci, 207, 189, 10.1016/S0376-7388(02)00226-0 Dai, 2001, Synthesis and characterization of sulfonated poly(phthalazinone ether sulfone ketone) for ultrafiltration and nanofiltration membranes, J Appl Polym Sci, 79, 1685, 10.1002/1097-4628(20010228)79:9<1685::AID-APP180>3.0.CO;2-L Dai, 2001, Thermostable ultrafiltration and nanofiltration membranes from sulfonated poly(phthalazinone ether sulfone ketone), J Membr Sci, 188, 195, 10.1016/S0376-7388(01)00379-9 Jian, 1999, Application of poly(phthalazinone ether sulfone ketone)s to gas membrane separation, J Appl Polym Sci, 71, 2385, 10.1002/(SICI)1097-4628(19990404)71:14<2385::AID-APP10>3.0.CO;2-S Critchley, 2003, Thermally Stable, 775 Mizes, 1991, Conduction in ladder polymers, Phys Rev B, 44, 3963, 10.1103/PhysRevB.44.3963 Costello, 1994, Analysis of a thermally stable polypyrrolone for high temperature membrane-based gas separations, J Membr Sci, 90, 117, 10.1016/0376-7388(94)80039-1 Gao, 1996, Gas Permeability of Polyimides and Polypyrrolone Derived from 2,2′-Bis(p-trimellitoxyphenyl)hexafluoropropane Dianhydride, J Appl Polym Sci, 59, 1315, 10.1002/(SICI)1097-4628(19960222)59:8<1315::AID-APP15>3.0.CO;2-4 Xuesong, 1994, Gas permeation properties of some polypyrrolones, J Membr Sci, 88, 37, 10.1016/0376-7388(93)E0157-F Xuesong, 1995, Gas transport properties of polyimides and polypyrrolone containing ester linkage, Polymer, 36, 1035, 10.1016/0032-3861(95)93604-K Thomas, 2009, Pure- and mixed-gas permeation properties of a microporous spirobisindane-based ladder polymer (PIM-1), J Membr Sci, 333, 125, 10.1016/j.memsci.2009.02.003 Hart, 2014, Estimating gas permeability and permselectivity of microporous polymers, J Membr Sci, 468, 259, 10.1016/j.memsci.2014.06.017 Budd, 2005, Gas separation membranes from polymers of intrinsic microporosity, J Membr Sci, 251, 263, 10.1016/j.memsci.2005.01.009 Thomas, 2009, Hydrocarbon/hydrogen mixed-gas permeation properties of PIM-1, an amorphous microporous spirobisindane polymer, J Membr Sci, 338, 1, 10.1016/j.memsci.2009.04.021 Li, 2013, Mechanically robust thermally rearranged (TR) polymer membranes with spirobisindane for gas separation, J Membr Sci, 434, 137, 10.1016/j.memsci.2013.01.011 Vopička, 2014, Mixed gas sorption in glassy polymeric membranes: II. CO2/CH4 mixtures in a polymer of intrinsic microporosity (PIM-1), J Membr Sci., 459, 264, 10.1016/j.memsci.2014.02.003 Swaidan, 2014, Pure- and mixed-gas CO2/CH4 separation properties of PIM-1 and an amidoxime-functionalized PIM-1, J Membr Sci, 457, 95, 10.1016/j.memsci.2014.01.055 Tsarkov, 2012, Solvent nanofiltration through high permeability glassy polymers: Effect of polymer and solute nature, J Membr Sci, 423-424, 65, 10.1016/j.memsci.2012.07.026 Li, 2014, Temperature dependence of gas sorption and permeation in PIM-1, J Membr Sci, 450, 380, 10.1016/j.memsci.2013.09.030 Zimmerman, 1999, Comparison of gas transport and sorption in the ladder polymer BBL and some semi-ladder polymers, Polymer, 40, 5655, 10.1016/S0032-3861(98)00777-0 Zhou, 1995, Synthesis and properties of polybenzimidazobenzophenanthrolines, J Appl Polym Sci, 58, 1561, 10.1002/app.1995.070580919 Costello, 1994, Effect of structure on the temperature dependence of gas transport and sorption in a series of polycarbonates, J Polym Sci, Part B: Polym Phys, 32, 701, 10.1002/polb.1994.090320412 Chung, 2004, Pressure and temperature dependence of the gas-transport properties of dense poly[2,6-toluene-2,2-bis(3,4-dicarboxylphenyl)hexafluoropropane diimide] membranes, J Polym Sci, Part B: Polym Phys, 42, 354, 10.1002/polb.10629 Alentiev, 2002, Gas and vapor sorption, permeation, and diffusion in glassy amorphous teflon AF1600, Macromolecules, 35, 9513, 10.1021/ma020494f Masuda, 1988, Diffusion and solution of gases in substituted polyacetylene membranes, Polymer, 29, 2041, 10.1016/0032-3861(88)90178-4 Aili, 2011, Phosphoric acid doped membranes based on Nafion®, PBI and their blends – Membrane preparation, characterization and steam electrolysis testing, Int J Hydrogen Energy, 36, 6985, 10.1016/j.ijhydene.2011.03.058 Chuang, 2008, Preparation and characterization of fluorine-containing polybenzimidazole/imidazole hybrid membranes for proton exchange membrane fuel cells, Eur Polym J, 44, 2202, 10.1016/j.eurpolymj.2008.04.021 Chung, 2006, Enhanced Matrimid membranes for pervaporation by homogenous blends with polybenzimidazole (PBI), J Membr Sci, 271, 221, 10.1016/j.memsci.2005.07.042 Daletou, 2005, Proton conducting membranes based on blends of PBI with aromatic polyethers containing pyridine units, J Membr Sci, 252, 115, 10.1016/j.memsci.2004.11.023 Geormezi, 2012, Polymer blends based on copolymers bearing both side and main chain pyridine units as proton exchange membranes for high temperature fuel cells, J Membr Sci, 396, 57, 10.1016/j.memsci.2011.12.039 Bos, 2001, Suppression of gas separation membrane plasticization by homogeneous polymer blending, AIChE J, 47, 1088, 10.1002/aic.690470515 Utracki, 2003, Introduction to Polymer Blends, 1 Utracki, 2014, 3 - Characterization of high temperature polymer blends for specific applications: fuel cells and aerospace applications, 70 Lizymol, 1993, Thermal behaviour of polymer blends: a comparison of the thermal properties of miscible and immiscible systems, Polym Degrad Stab, 41, 59, 10.1016/0141-3910(93)90061-M Yang, 2004, Evaluation of chitosan/PVA blended hydrogel membranes, J Membr Sci, 236, 39, 10.1016/j.memsci.2004.02.005 Kurdi, 2006, Formation and thermal stability of BMI-based interpenetrating polymers for gas separation membranes, J Membr Sci, 280, 234, 10.1016/j.memsci.2006.01.024 Ismail, 2001, A review on the latest development of carbon membranes for gas separation, J Membr Sci, 193, 1, 10.1016/S0376-7388(01)00510-5 Ozaki, 1997, Novel preparation method for the production of mesoporous carbon fiber from a polymer blend, Carbon, 35, 1031, 10.1016/S0008-6223(97)89878-8 Hatori, 2001, Mesoporous carbon membranes from polyimide blended with poly(ethylene glycol), J Appl Polym Sci, 79, 836, 10.1002/1097-4628(20010131)79:5<836::AID-APP80>3.0.CO;2-1 Petersen, 1997, Capillary carbon molecular sieve membranes derived from Kapton for high temperature gas separation, J Membr Sci, 131, 85, 10.1016/S0376-7388(97)00041-0 Kim, 2004, Carbon molecular sieve membranes derived from thermally labile polymer containing blend polymers and their gas separation properties, J Membr Sci, 243, 9, 10.1016/j.memsci.2004.05.001 Takashi, 2000, Control of pore structure in carbon, Carbon, 38, 269, 10.1016/S0008-6223(99)00142-6 Khulbe, 2010, The art of surface modification of synthetic polymeric membranes, J Appl Poly Sci, 115, 855, 10.1002/app.31108 Yin, 2015, Polymer-matrix nanocomposite membranes for water treatment, J Membr Sci, 479, 256, 10.1016/j.memsci.2014.11.019 Rezakazemi, 2014, State-of-the-art membrane based CO2 separation using mixed matrix membranes (MMMs): An overview on current status and future directions, Prog Polym Sci, 39, 817, 10.1016/j.progpolymsci.2014.01.003 Baheri, 2015, Performance of PVA/NaA Mixed Matrix Membrane for Removal of Water from Ethylene Glycol Solutions by Pervaporation, Chem Eng Commun, 202, 316, 10.1080/00986445.2013.841149 Rezakazemi, 2011, Simulation and determination of optimum conditions of pervaporative dehydration of isopropanol process using synthesized PVA–APTEOS/TEOS nanocomposite membranes by means of expert systems, J Membr Sci, 379, 224, 10.1016/j.memsci.2011.05.070 Shahverdi, 2013, Pervaporation study of ethylene glycol dehydration through synthesized (PVA–4A)/polypropylene mixed matrix composite membranes, Polym Eng Sci, 53, 1487, 10.1002/pen.23406 Rezakazemi, 2013, Transient Computational Fluid Dynamics (CFD) modeling of pervaporation separation of Aromatic/Aliphatic hydrocarbon mixtures using polymer composite membrane, Polym Eng Sci, 53, 1494, 10.1002/pen.23410 Shahverdi, 2013, Performance of mixed matrix membrane for removal of water from ethylene glycol solutions by pervaporation, Chem Eng Commun Krumpfer, 2013, Make it nano-Keep it nano, Nano Today, 8, 417, 10.1016/j.nantod.2013.07.006 Pendergast, 2011, A review of water treatment membrane nanotechnologies, Energy Environ Sci, 4, 1946, 10.1039/c0ee00541j Basu, 2011, MOF-containing mixed-matrix membranes for CO2/CH4 and CO2/N2 binary gas mixture separations, Sep Purif Technol, 81, 31, 10.1016/j.seppur.2011.06.037 Yang, 2011, Poly-/metal-benzimidazole nano-composite membranes for hydrogen purification, Energy Environ Sci, 4, 4171, 10.1039/c1ee01324f Yang, 2013, High performance ZIF-8/PBI nano-composite membranes for high temperature hydrogen separation consisting of carbon monoxide and water vapor, Int J Hydrogen Energy, 38, 229, 10.1016/j.ijhydene.2012.10.045 Tingxu, 2012 Yang, 2012, Symmetric and Asymmetric Zeolitic Imidazolate Frameworks (ZIFs)/Polybenzimidazole (PBI) Nanocomposite Membranes for Hydrogen Purification at High Temperatures, Adv Energy Mater, 2, 1358, 10.1002/aenm.201200200 Pechar, 2006, Preparation and characterization of a poly(imide siloxane) and zeolite L mixed matrix membrane, J Membr Sci, 277, 210, 10.1016/j.memsci.2005.10.031 Basu, 2010, Asymmetric Matrimid®/[Cu3(BTC)2] mixed-matrix membranes for gas separations, J Membr Sci, 362, 478, 10.1016/j.memsci.2010.07.005 Zhu, 1999, Preparation and properties of organosoluble polyimide/silica hybrid materials by sol–gel process, J Appl Polym Sci, 73, 2977, 10.1002/(SICI)1097-4628(19990929)73:14<2977::AID-APP22>3.0.CO;2-J Hu, 2008, Amino-functionalized multiple-walled carbon nanotubes-polyimide nanocomposite films fabricated by in situ polymerization, J Appl Polym Sci, 110, 701, 10.1002/app.28644 Yang, 2012 Ahn, 2010, Gas transport behavior of mixed-matrix membranes composed of silica nanoparticles in a polymer of intrinsic microporosity (PIM-1), J Membr Sci, 346, 280, 10.1016/j.memsci.2009.09.047 Freeman BD. High-Temperature Nanocomposite Membranes for Hydrogen Production for Fuel Cells Texas Commission on Environmental Quality. 2006. Ayandele, 2012, Polyhedral Oligomeric Silsesquioxane (POSS)-containing polymer nanocomposites, Nanomaterials, 2, 445, 10.3390/nano2040445 Gopala, 2010, Fabrication and scale up of Polybenzimidazole (PBI) membrane based system for precombustion based capture of carbon dioxide