Safety barriers: Research advances and new thoughts on theory, engineering and management
Tài liệu tham khảo
Agrawal, 2018, Reliability assessment of safety critical intelligent systems: issues and challenges
Alizadeh, 2017, Reliability modelling of redundant safety systems without automatic diagnostics incorporating common cause failures and process demand, ISA (Instrum. Soc. Am.) Trans., 71, 599, 10.1016/j.isatra.2017.09.007
Alizadeh, 2018, Impact of common cause failure on reliability performance of redundant safety related systems subject to process demand, Reliab. Eng. Syst. Saf., 172, 129, 10.1016/j.ress.2017.12.011
Argenti, 2014, Experimental and numerical methodology for the analysis of fireproofing materials, J. Loss Prev. Process. Ind., 28, 60, 10.1016/j.jlp.2013.05.005
As/Nzs 3845, 2015
Bain, 2015
Basnyat, 2007, Formal socio-technical barrier modelling for safety-critical interactive systems design, Saf. Sci., 45, 545, 10.1016/j.ssci.2007.01.001
Bolbot, 2019, Vulnerabilities and safety assurance methods in Cyber-Physical- Systems: a comprehensive review, Reliab. Eng. Syst. Saf., 182, 179, 10.1016/j.ress.2018.09.004
Brissaud, 2010
Bucelli, 2018, Assessment of safety barriers for the prevention of cascading events in oil and gas offshore installations operating in harsh environment, Ocean Eng., 158, 171, 10.1016/j.oceaneng.2018.02.046
Cai, 2012, Reliability analysis of subsea blowout preventer control systems subjected to multiple error shocks, J. Loss Prev. Process. Ind., 25, 1044, 10.1016/j.jlp.2012.07.014
Cai, 2012, Performance evaluation of subsea blowout preventer systems with common-cause failures, J. Petrol. Sci. Eng., 90, 18, 10.1016/j.petrol.2012.04.007
Cai, 2012, Using Bayesian networks in reliability evaluation for subsea blowout preventer control system, Reliab. Eng. Syst. Saf., 108, 32, 10.1016/j.ress.2012.07.006
Cai, 2013, Application of Bayesian networks in quantitative risk assessment of subsea blowout preventer operations, Risk Anal., 33, 1293, 10.1111/j.1539-6924.2012.01918.x
Cai, 2015, Real-time reliability evaluation methodology based on dynamic Bayesian networks: a case study of a subsea pipe ram BOP system, ISA Trans., 58, 595, 10.1016/j.isatra.2015.06.011
Cai, 2016, A multiphase dynamic Bayesian networks methodology for the determination of safety integrity levels, Reliab. Eng. Syst. Saf., 150, 105, 10.1016/j.ress.2016.01.018
CCPS-Center of Chemical Process Safety, 2001
CCPS-Center of Chemical Process Safety, 2001
Chastain-Knight, 2020, Confirming the safety instrumented system layer of protection, Process Saf. Prog., 39, 10.1002/prs.12079
Chebila, 2015, Generalized analytical expressions for safety instrumented systems' performance measures: PFDavg and PFH, J. Loss Prev. Process. Ind., 34, 167, 10.1016/j.jlp.2015.02.002
Chen, 2015, Failure mechanism dependence and reliability evaluation of non-repairable system, Reliab. Eng. Syst. Saf., 138, 273, 10.1016/j.ress.2015.02.002
de Dianous, 2006, ARAMIS project: a more explicit demonstration of risk control through the use of bow-tie diagrams and the evaluation of safety barrier performance, J. Hazard Mater., 130, 220, 10.1016/j.jhazmat.2005.07.010
de Lira-Flores, 2019, Optimal plant layout considering the safety instrumented system design for hazardous equipment, Process Saf. Environ. Protect., 124, 97, 10.1016/j.psep.2019.01.021
de Souza, 2017, Safety active barriers considering different scenarios of faults in modern production systems, 154, 10.1007/978-3-319-56077-9_14
Ding, 2020, Quantitative fire risk assessment of cotton storage and a criticality analysis of risk control strategies, Fire Mater., 44, 165, 10.1002/fam.2761
DNV, 2014
Duijm, 2009, Safety-barrier diagrams as a safety management tool Reliability Engineering, & System Safety, 94, 332, 10.1016/j.ress.2008.03.031
Elusakin, 2020, Reliability analysis of subsea blowout preventers with condition-based maintenance using stochastic Petri nets, J. Loss Prev. Process. Ind., 63, 104026, 10.1016/j.jlp.2019.104026
EN 50126, 2017, Railway applications - the specification and demonstration of reliability, availability, maintainability and safety (RAMS), CENELEC - European Committee for Electrotechnical Standardization
EN 62682, 2015, Management of alarms systems for the process industries, CENELEC - European Committee for Electrotechnical Standardization
Ersdal, 2017, Safety barriers in structural and marine engineering
Fan, 2018, A stochastic hybrid systems model of common-cause failures of degrading components, Reliab. Eng. Syst. Saf., 172, 159, 10.1016/j.ress.2017.12.003
Fowler, 2004, Mission-critical and safety-critical development, IEEE Instrum. Meas. Mag., DEC, 52, 10.1109/MIM.2004.1383466
Francese, 2014
Francis, 2014, A metric and frameworks for resilience analysis of engineered and infrastructure systems, Reliab. Eng. Syst. Saf, 121, 90, 10.1016/j.ress.2013.07.004
Freeman, 2018, General method for uncertainty evaluation of safety integrity level calculations – part 2 analytical methods, Process Saf. Prog., 37, 153, 10.1002/prs.11915
Freeman, 2016, Evaluation of uncertainty in safety integrity level calculations, Process Saf. Prog., 35, 341, 10.1002/prs.11805
Gabriel, 2018, Developments in SIL determination and calculation, Reliab. Eng. Syst. Saf., 177, 148, 10.1016/j.ress.2018.04.028
Gomez-Mares, 2012, Performance assessment of passive fire protection materials, Ind. Eng. Chem. Res., 51, 7679, 10.1021/ie201867v
Grattan, 2018, Improving barrier effectiveness using human factors methods, J. Loss Prev. Process. Ind., 55, 400, 10.1016/j.jlp.2018.07.016
Guldenmund, 2006, The development of an audit technique to assess the quality of safety barrier management, J. Hazard Mater., 130, 234, 10.1016/j.jhazmat.2005.07.011
Guo, 2007, A simple reliability block diagram method for safety integrity verification, Reliab. Eng. Syst. Saf., 92, 1267, 10.1016/j.ress.2006.08.002
Guo, 2008, Automatic creation of Markov models for reliability assessment of safety instrumented systems, Reliab. Eng. Syst. Saf., 93, 829, 10.1016/j.ress.2007.03.029
Han, 2019, Integrated methodology for determination of preventive maintenance interval of safety barriers on offshore installations, Process Saf. Environ. Protect., 132, 313, 10.1016/j.psep.2019.09.035
Harms-Ringdahl, 2009, Analysis of safety functions and barriers in accidents, Saf. Sci., 47, 353, 10.1016/j.ssci.2008.06.004
Hauge, 2016
Hauge, 2011
Hauge, 2013
Hauge, 2015
Hayes, 2012, Use of safety barriers in operational safety decision making, Saf. Sci., 50, 424, 10.1016/j.ssci.2011.10.002
He, 2016, Architecture design and safety research of a double-triple-channel redundant and fault-tolerant system, J. Loss Prev. Process. Ind., 44, 495, 10.1016/j.jlp.2016.07.029
Hellmich, 2015, Markov analysis of redundant standby safety systems under periodic surveillance testing, Reliab. Eng. Syst. Saf., 133, 48, 10.1016/j.ress.2014.08.007
Hoem, 2016, Aggregation and presentation of safety barrier status information Risk
Hollnagel, 2008, Risk+barrier=safety? Safety Science, 46, 221, 10.1016/j.ssci.2007.06.028
IEC 61508, 2010
IEC 61511, 2016
IEC 62061, 2005
IEC 62340, 2007
Innal, 2014, Probability and frequency calculations related to protection layers revisited, J. Loss Prev. Process. Ind., 31, 56, 10.1016/j.jlp.2014.07.001
Innal, 2016, PFDavg generalized formulas for SIS subject to partial and full periodic tests based on multi-phase Markov models, Reliab. Eng. Syst. Saf., 150, 160, 10.1016/j.ress.2016.01.022
Innal, 2016, Uncertainty handling in safety instrumented systems according to IEC 61508 and new proposal based on coupling Monte Carlo analysis and fuzzy sets, J. Loss Prev. Process. Ind., 44, 503, 10.1016/j.jlp.2016.07.028
2010, Guidance on the evaluation of fire, combustible gas and toxic gas system effectiveness, International Society of Automation
ISO 12100, 2012
ISO 13577-4, 2014
ISO 13702, 2015
ISO 13849, 2015
ISO 16530, 2017
ISO 19353, 2015
ISO 28781, 2010
Jahanian, 2015, The role of component arrangement in complex safety instrumented systems—a case study, Process Saf. Environ. Protect., 94, 113, 10.1016/j.psep.2014.12.009
Janssens, 2015, A decision model to allocate protective safety barriers and mitigate domino effects, Reliab. Eng. Syst. Saf., 143, 44, 10.1016/j.ress.2015.05.022
Jardine, 2006, A review on machinery diagnostics and prognostics implementing condition-based maintenance, Mech. Syst. Signal Process., 20, 1483, 10.1016/j.ymssp.2005.09.012
Jia, 2018, Copula‐based reliability and safety analysis of safety‐critical systems with dependent failures, Qual. Reliab. Eng. Int., 34, 928, 10.1002/qre.2301
Jigar, 2016, Spurious activation analysis of safety-instrumented systems, Reliab. Eng. Syst. Saf., 156, 15, 10.1016/j.ress.2016.06.015
Jin, 2011, Reliability performance of safety instrumented systems: a common approach for both low- and high-demand mode of operation, Reliab. Eng. Syst. Saf., 96, 365, 10.1016/j.ress.2010.11.007
Jin, 2012, Uncertainty assessment of reliability estimates for safety-instrumented systems, Proc. Inst. Mech. Eng. O J. Risk Reliab., 226, 646
Johansen, 2015, Barrier management in the offshore oil and gas industry, J. Loss Prev. Process. Ind., 34, 49, 10.1016/j.jlp.2015.01.023
Johnson, 2003
Julsereewong, 2017, Safety instrumented system design in consideration of cost-benefit analysis: a case study of tail gas treating process, 637
Kaczor, 2016, Verification of safety integrity level with the application of Monte Carlo simulation and reliability block diagrams, J. Loss Prev. Process. Ind., 41, 31, 10.1016/j.jlp.2016.03.002
Kanamaru, 2017, Bridging functional safety and cyber security of SIS/SCS
Kang, 2016, Analysis of the safety barrier function: accidents caused by the failure of safety barriers and quantitative evaluation of their performance, J. Loss Prev. Process. Ind., 43, 361, 10.1016/j.jlp.2016.06.010
Kaur, 2018, Dependability analysis of safety critical systems: issues and challenges, Ann. Nucl. Energy, 120, 127, 10.1016/j.anucene.2018.05.027
Khakzad, 2015, Risk-based design of process plants with regard to domino effects and land use planning, J. Hazard Mater., 299, 289, 10.1016/j.jhazmat.2015.06.020
Khakzad, 2015, Using graph theory to analyze the vulnerability of process plants in the context of cascading effects, Reliab. Eng. Syst. Saf., 143, 63, 10.1016/j.ress.2015.04.015
Khakzad, 2017, Cost-effective allocation of safety measures in chemical plants w.r.t. land-use planning, Saf. Sci., 97, 2, 10.1016/j.ssci.2015.10.010
Khakzad, 2017, Application of graph theory to cost-effective fire protection of chemical plants during domino effects, Risk Anal., 37, 1652, 10.1111/risa.12712
Khalil, 2019, New statistical formulations for determination of qualification test plans of safety instrumented systems (SIS) subject to low/high operational demands, Reliab. Eng. Syst. Saf., 189, 196, 10.1016/j.ress.2019.04.033
Kjellen, 2007, Safety in the design of offshore platforms: integrated safety versus safety as an add-on characteristic, Saf. Sci., 45, 107, 10.1016/j.ssci.2006.08.012
Kumar, 2018, Parameter estimation for quantitative dependability analysis of safety-critical and control systems of NPP, IEEE Trans. Nucl. Sci., 65, 1080, 10.1109/TNS.2018.2827106
Kumar, 2019, An optimized technique for reliability analysis of safety-critical systems: a case study of nuclear power plant, Qual. Reliab. Eng. Int., 35, 461, 10.1002/qre.2340
Kundur, 2011, Towards modelling the impact of cyber attacks on a smart grid, Int. J. Secur. Network., 6, 2, 10.1504/IJSN.2011.039629
Landucci, 2015, Quantitative assessment of safety barrier performance in the prevention of domino scenarios triggered by fire, Reliab. Eng. Syst. Saf., 143, 30, 10.1016/j.ress.2015.03.023
Landucci, 2016, Domino effect frequency assessment: the role of safety barriers, J. Loss Prev. Process. Ind., 44, 706, 10.1016/j.jlp.2016.03.006
Landucci, 2017, vol. 27
Lauridsen, 2016, Barrier management and the interaction between technical, operational and organisational barrier elements
Li, 2018, Safety management systems: a broad overview of the literature, Saf. Sci., 103, 94, 10.1016/j.ssci.2017.11.016
Liu, 2014, Optimal staggered testing strategies for heterogeneously redundant safety systems, Reliab. Eng. Syst. Saf., 126, 65, 10.1016/j.ress.2014.01.013
Liu, 2014, Discrimination of low- and high-demand modes of safety-instrumented systems based on probability of failure on demand adaptability, Proc. Inst. Mech. Eng. O J. Risk Reliab., 228, 409
Liu, 2011, Reliability assessment of safety instrumented systems subject to different demand modes, J. Loss Prev. Process. Ind., 24, 49, 10.1016/j.jlp.2010.08.014
Liu, 2013, Reliability effects of test strategies on safety-instrumented systems in different demand modes, Reliab. Eng. Syst. Saf., 119, 235, 10.1016/j.ress.2013.06.035
Liu, 2016, Proof-testing strategies induced by dangerous detected failures of safety-instrumented systems, Reliab. Eng. Syst. Saf., 145, 366, 10.1016/j.ress.2015.06.016
Longhi, 2015, Multiobjective optimization of strategies for operation and testing of low-demand safety instrumented systems using a genetic algorithm and fault trees, Reliab. Eng. Syst. Saf., 142, 525, 10.1016/j.ress.2015.06.010
Lugauer, 2016, Functional safety of hybrid laser safety systems – how can a combination between passive and active components prevent accidents?, Physics Procedia, 83, 1196, 10.1016/j.phpro.2016.08.126
Lugauer, 2016, Describing statistical deviations of protection times of laser safety barriers, MM Science Journal, NOV, 1445, 10.17973/MMSJ.2016_11_2016160
Ma, 2017, Design of safety PLC execution unit based on redundancy structure of heterogeneous dual-processor, 364
Ma, 2017, Reliability model of the digital reactor protection system considering the repair time and common cause failure, J. Nucl. Sci. Technol., 54, 539, 10.1080/00223131.2017.1291375
Macii, 2015, A safety instrumented system for rolling stocks: methodology, design process and safety analysis, Measurement, 67, 164, 10.1016/j.measurement.2015.01.002
Mancuso, 2016, Bayesian approach for safety barrier portfolio optimization
Markert, 2013, Modelling of safety barriers including human and organisational factors to improve process safety, Chem. Eng. Process, 31, 283
McLeod, 2017, Human factors in barrier management: hard truths and challenges, Process Saf. Environ. Protect., 110, 31, 10.1016/j.psep.2017.01.012
Mechri, 2015, Switching Markov chains for a holistic modeling of SIS unavailability, Reliab. Eng. Syst. Saf., 133, 212, 10.1016/j.ress.2014.09.005
Meng, 2018, Modeling patterns for reliability assessment of safety instrumented systems, Reliab. Eng. Syst. Saf., 180, 111, 10.1016/j.ress.2018.06.026
Misuri, 2020, Assessment of safety barrier performance in Natech scenarios, Reliab. Eng. Syst. Saf., 193, 106597, 10.1016/j.ress.2019.106597
Miura, 2006, Characterization of operational safety in offshore oil wells, J. Petrol. Sci. Eng., 51, 111, 10.1016/j.petrol.2005.11.018
Mkhida, 2014, Integration of intelligent sensors in safety instrumented systems (SIS), Process Saf. Environ. Protect., 92, 142, 10.1016/j.psep.2013.01.001
Moreno, 2018, Identification of critical safety barriers in biogas facilities, Reliab. Eng. Syst. Saf., 169, 81, 10.1016/j.ress.2017.07.013
NEA-Nuclear Energy Agency, 2003
NRC-National Research Council, 2007
Øien, 2015, Towards a holistic approach for barrier management in the petroleum industry, Technical report
OREDA0, 2015
Paltrinieri, 2009, Risk reduction in road and rail LPG transportation by passive fire protection, J. Hazard Mater., 167, 332, 10.1016/j.jhazmat.2008.12.122
Paltrinieri, 2012, Cost-benefit analysis of passive fire protections in road LPG transportation, Risk Anal., 32, 200, 10.1111/j.1539-6924.2011.01654.x
Pitblado, 2013, Advanced safety barrier management with inclusion of human and organizational aspects, Chem. Eng. Process, 31, 331
Pitblado, 2015, A method for barrier‐based incident investigation, Process Saf. Prog., 34, 328, 10.1002/prs.11738
Pitblado, 2016, Stokke. Concepts for dynamic barrier management, J. Loss Prev. Process. Ind., 43, 741, 10.1016/j.jlp.2016.07.005
Prashanth, 2017, Factors influencing safety barrier performance for onshore gas drilling operations, J. Loss Prev. Process. Ind., 49, 291, 10.1016/j.jlp.2017.07.009
PSA-Petroleum Safety Authority, 2011
Rahimi, 2013, Monitoring human and organizational factors influencing common-cause failures of safety-instrumented system during the operational phase, Reliab. Eng. Syst. Saf., 120, 10, 10.1016/j.ress.2013.03.004
Ramzali, 2015, Safety barriers analysis of offshore drilling system by employing Fuzzy event tree analysis, Saf. Sci., 78, 49, 10.1016/j.ssci.2015.04.004
Rathnayakaa, 2011, SHIPP methodology: predictive accident modeling approach. Part II. Validation with case study, Process Saf. Environ. Protect., 89, 75, 10.1016/j.psep.2010.12.002
Rausand, 2011
Rausand, 2014
Reason, 2006, Revisiting the “Swiss cheese” model of accidents, EUROCONTROL Experimental Center
Rollenhagen, 2011, Event investigations at nuclear power plants in Sweden: reflections about a method and some associated practices, Saf. Sci., 49, 21, 10.1016/j.ssci.2009.12.012
RWM-Radioactive Waste Management, 2016
Schupp, 2004, Integrating human factors in the design of safety-critical systems – a barrier based approach, vol. 152, 285
Selvik, 2017, How to classify failures when collecting data for safety-instrumented systems in the oil and gas industry, J. Risk Res., 20, 952, 10.1080/13669877.2015.1121910
Shahrokhi, 2010, A development in energy flow/barrier analysis, Saf. Sci., 48, 598, 10.1016/j.ssci.2010.01.006
Shin, 2015, On condition based maintenance policy, Journal of Computational Design and Engineering, 2, 119, 10.1016/j.jcde.2014.12.006
Simon, 2019, Assessment of safety integrity level by simulation of dynamic Bayesian networks considering test duration, J. Loss Prev. Process. Ind., 57, 101, 10.1016/j.jlp.2018.11.002
Singh, 2019, Design of safety critical and control systems of nuclear power plants using Petri nets, Nuclear Engineering and Technology, 51, 1289, 10.1016/j.net.2019.02.014
Sklet, 2006, Safety barriers: definition, classification, and performance, J. Loss Prev. Process. Ind., 19, 494, 10.1016/j.jlp.2005.12.004
Skorupski, 2015, The risk of an air accident as a result of a serious incident of the hybrid type, Reliab. Eng. Syst. Saf., 140, 37, 10.1016/j.ress.2015.03.031
Sliwiniski, 2018, Safety integrity level verification for safety-related functions with security aspects, Process Saf. Environ. Protect., 118, 79, 10.1016/j.psep.2018.06.016
Sobral, 2019, Assessment of the adequacy of safety barriers to hazards, Saf. Sci., 114, 40, 10.1016/j.ssci.2018.12.021
Summers, 2018, Spring meeting of the American-Institute-of-Chemical-Engineers (AIChE)/13th global congress on process safety, Inherently safer automation, 37, 31
Sun, 2017, A technique to control major hazards of the coal gasification process developed from critical events and safety barriers, Process Saf. Prog., 36, 382, 10.1002/prs.11880
Szymanek, 2010, Defence-in-Depth” strategy in transport risk management, vol. 104, 51
Tang, 2017, Effect of truncated input parameter distribution on the integrity of safety instrumented systems under epistemic uncertainty, IEEE Trans. Reliab., 66, 745, 10.1109/TR.2017.2717184
Torres-Echeverria, 2009, Design optimization of a safety-instrumented system based on RAMS+C addressing IEC 61508 requirements and diverse redundancy, Reliab. Eng. Syst. Saf., 94, 162, 10.1016/j.ress.2008.02.010
Torres-Echeverria, 2011, Modeling safety instrumented systems with MooN voting architectures addressing system reconfiguration for testing, Reliab. Eng. Syst. Saf., 96, 545, 10.1016/j.ress.2010.12.003
Tsunemi, 2019, Quantitative risk assessment of the interior of a hydrogen refueling station considering safety barrier systems, Int. J. Hydrogen Energy, 44, 23522, 10.1016/j.ijhydene.2019.07.027
Tugnoli, 2012, Mitigation of fire damage and escalation by fireproofing: a risk-based strategy, Reliab. Eng. Syst. Saf., 105, 25, 10.1016/j.ress.2011.11.002
Tugnoli, 2013, The performance of inorganic passive fire protections: an experimental and modelling study, Chemical Engineering Transactions, 32, 427
van Oosterom, 2017, Optimal maintenance policies for a safety-critical system and its deteriorating sensor, Nav. Res. Logist., 64, 399, 10.1002/nav.21763
Verlinden, 2012, Hybrid reliability model for nuclear reactor safety system, Reliab. Eng. Syst. Saf., 101, 35, 10.1016/j.ress.2012.01.004
Vinnem, 2012, Risk modelling of maintenance work on major process equipment on offshore petroleum installations, J. Loss Prev. Process. Ind., 25, 274, 10.1016/j.jlp.2011.11.001
Wang, 2004, The impact of data uncertainty in determining safety integrity level, Process Saf. Environ. Protect., 82, 393, 10.1205/psep.82.6.393.53199
Wang, 2016, Method for assigning safety integrity level (SIL) during design of safety instrumented systems (SIS) from database, J. Loss Prev. Process. Ind., 44, 212, 10.1016/j.jlp.2016.09.020
Wang, 2016, Identification of protective actions to reduce the vulnerability of safety-critical systems to malevolent acts: a sensitivity-based decision-making approach, Reliab. Eng. Syst. Saf., 147, 9, 10.1016/j.ress.2015.09.005
Winge, 2018, Accident types and barrier failures in the construction industry, Saf. Sci., 105, 158, 10.1016/j.ssci.2018.02.006
Woods, 2015, Four concepts for resilience and the implications for the future of resilience engineering, Reliab. Eng. Syst. Saf., 141, 5, 10.1016/j.ress.2015.03.018
Wu, 2015
Wu, 2018, Reliability assessment for final elements of SISs with time dependent failures, J. Loss Prev. Process. Ind., 51, 186, 10.1016/j.jlp.2017.12.007
Wu, 2018, Performance analysis for subsea blind shear ram preventers subject to testing strategies, Reliab. Eng. Syst. Saf., 169, 281, 10.1016/j.ress.2017.08.022
Xie, 2018, Common cause failures and cascading failures in technical systems: similarities, differences and barriers
Xie, 2018, Safety barriers against common cause failure and cascading failures: a review and pilot analysis
Xie, 2019, Operational data-driven prediction for failure rates of equipment in safety-instrumented systems: a case study from the oil and gas industry, J. Loss Prev. Process. Ind., 60, 96, 10.1016/j.jlp.2019.04.004
Xie, 2020, Reliability and barrier assessment of series-parallel systems subject to cascading failures, Proc. Inst. Mech. Eng. O J. Risk Reliab.
Xue, 2013, A safety barrier-based accident model for offshore drilling blowouts, J. Loss Prev. Process. Ind., 26, 164, 10.1016/j.jlp.2012.10.008
Zeng, 2018, Dynamic risk assessment based on statistical failure data and condition-monitoring degradation data, IEEE Trans. Reliab., 67, 609, 10.1109/TR.2017.2778804
Zhang, 2018, Prognostic and health management for safety barriers in infrastructures: opportunities and challenges
Zhang, 2019, Performance analysis of redundant safety-instrumented systems subject to degradation and external demands, J. Loss Prev. Process. Ind., 62, 103946, 10.1016/j.jlp.2019.103946
Zhang, 2020, Optimization of maintenances following proof tests for the final element of a safety-instrumented system, Reliab. Eng. Syst. Saf., 196, 106779, 10.1016/j.ress.2019.106779
Zhen, 2020, New risk control mechanism for innovative deepwater artificial seabed system through online risk monitoring system, Appl. Ocean Res., 95, 102054, 10.1016/j.apor.2020.102054
Zhu, 2018, Application of prognostics and health management to low demand systems: use of condition data to help determine function test interval
Zhu, 2015, Risk-based optimal safety measure allocation for dust explosions, Saf. Sci., 74, 79, 10.1016/j.ssci.2014.12.002