A high PSRR CMOS voltage reference with 1.2 V operation
Tóm tắt
A high power supply rejection ratio (PSRR) CMOS band-gap reference (BGR) with 1.2 V operation is proposed in this paper. The reference features include an error amplifier with a trimming circuit and a trimming resistor array on the chip. Local positive feedback is used in the error amplifier to obtain high gain. By trimming the resistor array, the PSRR of the error amplifier is trimmed around one to obtain a high PSRR. The trimming resistor array is controlled externally. The post simulation results indicate that the PSRR is up to −130 dB@DC and −89 dB@10 kHz. The experimental results show that, under a supply voltage of 1.2 V the measured PSRR is −103 dB@dc and −74 dB@10 kHz.
Tài liệu tham khảo
Hironori Banba, P., & Shiga, Hitoshi. (1999). A CMOS band-gap reference circuit with sub-1 V operation. IEEE Journal of Solid-State Circuits, 34, 670–674.
Tham, K.-M., & Nagaraj, K. (1995). A low supply voltage high PSRR voltage reference in CMOS process. IEEE Journal of Solid-State Circuits, 30, 31–35.
Brooks, T. L. & Westwick, A. L. (1994) A low-power differential CMOS band-Gap. ISSCC, 248–249.
Ning, Z.-H, He, L.-N, Wang, Y. (2010). A novel high PSR voltage reference with secondary temperature compensation. International Conference on Electrical and Control Engineering, (pp. 3200–3203).
Hoon, S. K., Chen, J., Maloberti, F. (2002). An improved band-gap reference with high power supply rejection. IEEE International Symposium on Circuits and Systems, 5, V-833–V-836.
Tajall, I. A., & Atarodi M. (2004). Design and optimization of a high PSRR CMOS band-gap voltage reference. IEEE Proceedings of the International Symposium on Circuits and Systems, 3962–4000.
El-Nozahi, M., Amer, A., & Torres, J. (2010). High PSRR low drop-out regulator with feed-forward ripple cancellation technique. IEEE Journal of Solid-State Circuits, 45(3), 565–577.
Hu, Y., & Sowan, M. (2003). A 900 mV 25 μW high PSRR CMOS voltage reference dedicated to implantasble micro-devices. Proceedings of the International Symposium on Circuits and Systems 1: I-373 –I-376.
Ivanov, V., Brederlow, R., & Gerber, J. (2012). An ultra low power band-gap operational at supply from 0.75 V. IEEE Journal of Solid State Circuits, 47(7), 1515–1523.
Andreou, C. M., Koudounas, S., & Georgiou, J. (2012). A novel wide-temperature-range, 3.9 ppm/C CMOS band-gap reference circuit. IEEE Journal of Solid-State Circuits, 47(2), 574–581.
Ge, G., Zhang, C., & Hoogzaad, G. (2011). A single-trim CMOS band-gap reference with a 3σn accuracy of ± 0.15% from 40 °C to 125 °C. IEEE Journal of Solid-State Circuits, 46(11), 2693–2701.
Li, J.-H., Zhang, X-b, & Yu, M-y. (2011). A 1.2-V piecewise curvature-corrected band-gap reference in 0.5um CMOS process. IEEE Transactions on Very Large Scale Integration (VLSI) System, 19(6), 1118–1122.