Recycled fibers in reinforced concrete: A systematic literature review

Abbas, 2011, Management of steel solid waste generated from lathes as fiber reinforced concrete, Eur. J. Sci. Res., 50, 481 Abdul Awal, 2015, Strength, modulus of elasticity and shrinkage behaviour of concrete containing waste carpet fiber, Int. J. Geomate., 9, 1441 Achilleos, 2010, Comparison of conventional and “ECO” transportation pavements in Cyprus using life cycle approach, World Acad. Sci. Eng. Technol., 66, 379 Achilleos, 2011, Proportioning of steel fibre reinforced concrete mixes for pavement construction and their impact on environment and cost, Sustainability, 3, 965, 10.3390/su3070965 Aghaee, 2013, Mechanical properties of lightweight concrete partition with a core of textile waste, Adv. Civ. Eng., 10.1155/2013/482310 Aghaee, 2014, Waste steel wires modified structural lightweight concrete, Mater. Res., 17, 958, 10.1590/1516-1439.257413 Aghaee, 2015, Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires, Mag. Concr. Res., 67, 197, 10.1680/macr.14.00232 Aghaei Chadegani, 2013, A comparison between two main academic literature collections: web of science and scopus databases, Asian Soc. Sci., 9, 18 Ahmad, 2011, Use of waste human hair as fibre reinforcement in concrete, J. Inst. Eng. Civ. Eng. Div., 91, 43 Ahmad, 2010, Oil palm trunk fiber as a bio-waste resource for concrete reinforcement, Int. J. Mech. Mater. Eng., 5, 199 Ahmadi, 2017, Mechanical properties of the concrete containing recycled fibers and aggregates, Constr. Build. Mater., 144, 392, 10.1016/j.conbuildmat.2017.03.215 Aiello, 2009, Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength, Waste Manag., 29, 1960, 10.1016/j.wasman.2008.12.002 Akhtar, 2009, The effect of randomly oriented hair fiber on mechanical properties of fly-ash based hollow block for low height masonry structures, Asian J. Civ. Eng., 10, 221 Al Zubaidi, 2013, Effects of adding brass byproduct on the basic properties of concrete, Constr. Build. Mater., 38, 236, 10.1016/j.conbuildmat.2012.07.108 Al-Hadithi, 2016, The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers, J. Build. Eng., 8, 20 Alhozaimy, 2009, Performance of concretes reinforced with recycled plastic fibres, Mag. Concr. Res., 61, 293, 10.1680/macr.2008.00053 Al-Oraimi, 1995, Mechanical characterisation and impact behaviour of concrete reinforced with natural fibres, Compos. Struct., 32, 165, 10.1016/0263-8223(95)00043-7 Al-Tikrite, 2017, Mechanical properties of reactive powder concrete containing industrial and waste steel fibres at different ratios under compression, Constr. Build. Mater., 154, 1024, 10.1016/j.conbuildmat.2017.08.024 Anandamurthy, 2017, A review of fibrous reinforcements of concrete, J. Reinf. Plast. Compos., 36, 519, 10.1177/0731684416685168 Anurag, 2009, Laboratory investigation of indirect tensile strength using roofing polyester waste fibers in hot mix asphalt, Constr. Build. Mater., 23, 2035, 10.1016/j.conbuildmat.2008.08.018 Artemenko, 2008, Basalt plastics - new materials for road construction, Fibre Chem., 40, 499, 10.1007/s10692-009-9094-1 Asokan, 2009, Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites, J. Clean. Prod., 17, 821, 10.1016/j.jclepro.2008.12.004 Atlaoui, 2017, Experimental characterization of concrete beams elements reinforced by long fiber chips, J. Adhes. Sci. Technol., 31, 844, 10.1080/01694243.2016.1233620 Auchey, 1998, The use of recycled polymer fibers as secondary reinforcement in concrete structures, J. Constr. Educ., 3, 131 Awal, 2016, Green concrete production incorporating waste carpet fiber and palm oil fuel ash, J. Clean. Prod., 137, 157, 10.1016/j.jclepro.2016.06.162 Aziz, 2017, A comparative study of the behaviour of treated and untreated tyre crumb mortar with oil palm fruit fibre addition, Pertanika J. Sci. Technol., 25, 101 Balaguru, 1987, Properties of lightweight fiber reinforced concrete, Spec. Publ., 105 Barbuta, 2015, Statistical analysis of the tensile strength of coal fly ash concrete with fibers using central composite design, Ann. Mater. Sci. Eng. Baricevic, 2017, Hybrid fiber-reinforced concrete with unsorted recycled-tire steel fibers, J. Mater. Civ. Eng., 29, 10.1061/(ASCE)MT.1943-5533.0001906 Bdour, 2015, Assessing mechanical properties of hot mix asphalt with wire wool fibers, Adv. Civ. Eng., 10.1155/2015/795903 Belferrag, 2016, Effect of granulometric correction of dune sand and pneumatic waste metal fibers on shrinkage of concrete in arid climates, J. Clean. Prod., 112, 3048, 10.1016/j.jclepro.2015.11.007 Belferrag, 2013, Improvement of the compressive strength of mortar in the arid climates by valorization of dune sand and pneumatic waste metal fibers, Constr. Build. Mater., 40, 847, 10.1016/j.conbuildmat.2012.11.079 Berkowski, 2015, Effect of fiber on the concrete resistance to surface scaling due to cyclic freezing and thawing, Procedia Eng, 111, 121, 10.1016/j.proeng.2015.07.065 Bhavi, 2012, Effect of different percentages of waste High Density Polyethylene (HDPE) fibres on the properties of fibre reinforced concrete, Nat. Environ. Pollut. Technol., 11, 461 Bhogayata, 2017, Fresh and strength properties of concrete reinforced with metalized plastic waste fibers, Constr. Build. Mater., 146, 455, 10.1016/j.conbuildmat.2017.04.095 Bjegovic, 2013, Positive interaction of industrial and recycled steel fibres in fibre reinforced concrete, J. Civ. Eng. Manag., 19, S50 Borg, 2016, Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete, Constr. Build. Mater., 108, 29, 10.1016/j.conbuildmat.2016.01.029 Brewerton, 2001 Caggiano, 2017, On the mechanical response of hybrid fiber reinforced concrete with recycled and industrial steel fibers, Constr. Build. Mater., 147, 286, 10.1016/j.conbuildmat.2017.04.160 Caggiano, 2015, Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices, Cement Concr. Compos., 62, 146, 10.1016/j.cemconcomp.2015.04.015 Cengiz, 2017, Flexural stress enhancement of concrete by incorporation of algal cellulose nanofibers, Constr. Build. Mater., 149, 289, 10.1016/j.conbuildmat.2017.05.104 Centonze, 2012, Steel fibers from waste tires as reinforcement in concrete: a mechanical characterization, Constr. Build. Mater., 36, 46, 10.1016/j.conbuildmat.2012.04.088 Chang, 1999, Market applications for recycled postconsumer fibers, Fam. Consum. Sci. Res. J., 27, 320, 10.1177/1077727X9902700303 Chen, 2016, Behavior of CFRP-confined recycled aggregate concrete under axial compression, Constr. Build. Mater., 111, 85, 10.1016/j.conbuildmat.2016.01.054 Cheng, 2017, Pet fiber reinforced wet-mix shotcrete with walnut shell as replaced aggregate, Appl. Sci., 7, 10.3390/app7040345 Choudhary, 2016, Polypropylene fiber reinforced fly ash concrete - a literature review, Int. J. Earth Sci. Eng., 9, 2016 Ciocan, 2017, Optimization of glass fibers used as disperse reinforcement of epoxy polymer concrete with fly ash, Environ. Eng. Manag. J., 16, 1115, 10.30638/eemj.2017.115 Coatanlem, 2006, Lightweight wood chipping concrete durability, Constr. Build. Mater., 20, 776, 10.1016/j.conbuildmat.2005.01.057 Cojocaru, 2013, The behavior of cement concrete made with recycled materials for airport rigid pavements, Rev. Rom. Mater. Rom. J. Mater., 43, 363 Dai, 2011, Behavior and modeling of concrete confined with FRP composites of large deformability, J. Compos. Constr., 15, 963, 10.1061/(ASCE)CC.1943-5614.0000230 Dar, 2017, Effect of metakaolin and plastic bottles on durability of concrete: experimental work, Int. J. Civ. Eng. Technol., 8, 830 Dehghan, 2017, Recycled glass fiber reinforced polymer additions to Portland cement concrete, Constr. Build. Mater., 146, 238, 10.1016/j.conbuildmat.2017.04.011 Denyer, 2009, Producing a systematic review, 671 Dhariwal, 2010, Laboratory investigations on environmental pollutant materials : plastics and flyash, Indian J. Environ. Prot., 30, 943 Dinesh, 2017, Strength characteristics of fibre reinforced concrete using recycled PET, Int. J. Civ. Eng. Technol., 8, 92 Ding, 2008, Sustainable construction-The role of environmental assessment tools, J. Environ. Manag., 86, 451 Domski, 2017, Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete, J. Clean. Prod., 158, 18, 10.1016/j.jclepro.2017.04.165 dos Reis, 2009, Effect of textile waste on the mechanical properties of polymer concrete, Mater. Res., 12, 63, 10.1590/S1516-14392009000100007 Elkington, 1998, Partnerships from cannibals with forks: the triple bottom line of 21st-century business, Environ. Qual. Manag., 8, 37, 10.1002/tqem.3310080106 2013 2016 Fathi, 2016, Sugar beet fiber and Tragacanth gum effects on concrete, J. Clean. Prod., 112, 808, 10.1016/j.jclepro.2015.06.072 Flores Medina, 2016, Influence of fibers partially coated with rubber from tire recycling as aggregate on the acoustical properties of rubberized concrete, Constr. Build. Mater., 129, 25, 10.1016/j.conbuildmat.2016.11.007 Flores-Medina, 2014, Static mechanical properties of waste rests of recycled rubber and high quality recycled rubber from crumbed tyres used as aggregate in dry consistency concretes, Mater. Struct. Constr., 47, 1185, 10.1617/s11527-013-0121-6 Foglar, 2015, Blast performance of RC panels with waste steel fibers, Constr. Build. Mater., 94, 536, 10.1016/j.conbuildmat.2015.07.082 Foti, 2011, Preliminary analysis of concrete reinforced with waste bottles PET fibers, Constr. Build. Mater., 25, 1906, 10.1016/j.conbuildmat.2010.11.066 Foti, 2013, Use of recycled waste pet bottles fibers for the reinforcement of concrete, Compos. Struct., 96, 396, 10.1016/j.compstruct.2012.09.019 Foti, 2016, Innovative techniques for concrete reinforcement with polymers, Constr. Build. Mater., 112, 202, 10.1016/j.conbuildmat.2016.02.111 Foti, 2014, Impact behavior of structural elements in concrete reinforced with PET grids, Mech. Res. Commun., 57, 57, 10.1016/j.mechrescom.2014.02.007 Fraternali, 2011, Experimental study of the thermo-mechanical properties of recycled PET fiber-reinforced concrete, Compos. Struct., 93, 2368, 10.1016/j.compstruct.2011.03.025 Fraternali, 2014, Effects of recycled PET fibres on the mechanical properties and seawater curing of Portland cement-based concretes, Constr. Build. Mater., 61, 293, 10.1016/j.conbuildmat.2014.03.019 García, 2014, Mechanical recycling of GFRP waste as short-fiber reinforcements in microconcrete, Constr. Build. Mater., 64, 293, 10.1016/j.conbuildmat.2014.02.068 Ghernouti, 2015, Fresh and hardened properties of self-compacting concrete containing plastic bag waste fibers (WFSCC), Constr. Build. Mater., 82, 89, 10.1016/j.conbuildmat.2015.02.059 Girardi, 2017, Recycled additions for improving the thermal conductivity of concrete in preparing energy storage systems, Constr. Build. Mater., 135, 565, 10.1016/j.conbuildmat.2016.12.179 Goyal, 2013, Corporate sustainability performance and firm performance research: literature review and future research agenda, Manag. Decis., 51, 361, 10.1108/00251741311301867 Graeff, 2012, Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres, Eng. Struct., 45, 385, 10.1016/j.engstruct.2012.06.030 Grinys, 2013, Fracture of concrete containing crumb rubber, J. Civ. Eng. Manag., 19, 447 Groli, 2017, Improving cracking behaviour with recycled steel fibres targeting specific applications – analysis according to fib Model Code 2010, Struct. Concr., 18, 29, 10.1002/suco.201500170 Groli, 2015, Serviceability performance of FRC columns under imposed displacements: an experimental study, Eng. Struct., 101, 450, 10.1016/j.engstruct.2015.07.035 Groli, 2014, Cracking performance of SCC reinforced with recycled fibres - an experimental study, Struct. Concr., 15, 136, 10.1002/suco.201300008 Gu, 2016, Use of recycled plastics in concrete: a critical review, Waste Manag., 10.1016/j.wasman.2016.03.005 Guendouz, 2016, Use of plastic waste in sand concrete, J. Mater. Environ. Sci., 7, 382 Gupta, 2015, Impact resistance of concrete containing waste rubber fiber and silica fume, Int. J. Impact Eng., 83, 76, 10.1016/j.ijimpeng.2015.05.002 Gupta, 2017, Effect of elevated temperature and cooling regimes on mechanical and durability properties of concrete containing waste rubber fiber, Constr. Build. Mater., 137, 35, 10.1016/j.conbuildmat.2017.01.065 Gupta, 2017, Response assessment under dynamic loading and microstructural investigations of rubberized concrete, J. Mater. Civ. Eng., 29, 10.1061/(ASCE)MT.1943-5533.0001905 Haghi, 2009, Fibre-reinforced polystyrene concrete. Advanced composite of tomorrow, J. Balk. Tribol. Assoc., 15, 493 Hama, 2017, Improving mechanical properties of lightweight Porcelanite aggregate concrete using different waste material, Int. J. Sustain. Built Environ., 6, 81, 10.1016/j.ijsbe.2017.03.002 Hamoush, 1994, Feather fiber reinforced concrete, Concr. Int., 16, 33 Hassani, 2010, Enhancement of concrete properties for pavement slabs using waste metal drillings and silica fume, Waste Manag. Res., 28, 56, 10.1177/0734242X09104143 Henry, 2014, Understanding the regional context of sustainable concrete in Asia: case studies in Mongolia and Singapore, Resour. Conserv. Recycl., 82, 86, 10.1016/j.resconrec.2013.10.012 Islam, 2016, Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete, Int. J. Sustain. Built Environ., 5, 345, 10.1016/j.ijsbe.2016.05.007 Ismail, 2017, The influence of steel fibers extracted from waste tyre on properties of concrete containing fly ash, Int. J. Adv. Sci. Eng. Inf. Technol., 7, 2232, 10.18517/ijaseit.7.6.3522 Jafarifar, 2017, Post-cracking tensile behaviour of steel-fibre-reinforced roller-compacted-concrete for FE modelling and design purposes, Mater. Construcción, 67, 1 Jafarifar, 2014, Moisture transport and drying shrinkage properties of steel-fibre-reinforced-concrete, Constr. Build. Mater., 73, 41, 10.1016/j.conbuildmat.2014.09.039 Jafarifar, 2016, The effect of shrinkage cracks on the load bearing capacity of steel-fibre-reinforced roller-compacted-concrete pavements, Mater. Struct. Constr., 49, 2329, 10.1617/s11527-015-0652-0 Jalal, 2012, Compressive strength enhancement of concrete reinforced by waste steel fibers utilizing nano SiO2, Middle East J. Sci. Res., 12, 382 James, 2017, Effect of hair fibre and GGBS on various properties of concrete-an experimental study, Int. J. Civ. Eng. Technol., 8, 648 Jandiyal, 2016, A review on using fibers made from waste PET bottles in concrete, Int. J. Civ. Eng. Technol., 7, 553 Jarabo, 2012, Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product properties, Ind. Crops Prod., 39, 89, 10.1016/j.indcrop.2012.02.017 Jawaid, 2011, Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review, Carbohydr. Polym., 86, 1, 10.1016/j.carbpol.2011.04.043 Kakvand, 2014, Experimentally analysing compressive and tensile strengths of concrete containing steel waste fibres, Int. J. Struct. Eng., 5, 132, 10.1504/IJSTRUCTE.2014.060903 Kalpokaite-Dickuviene, 2012, Influence of fibres content on performance parameters of refractory concrete, Mechanika, 18, 498, 10.5755/j01.mech.18.5.2697 Kandasamy, 2011, Fibre reinforced concrete using domestic waste plastics as fibres, ARPN J. Eng. Appl. Sci., 6, 75 Kandasamy, 2012, Fiber reinforced self compacting concrete using domestic waste plastics as fibres, J. Eng. Appl. Sci., 7, 405, 10.3923/jeasci.2012.405.410 Kandasamy, 2014, Study on fibre reinforced concrete using manufactured sand as fine aggregate and domestic waste plastics as fibres, J. Struct. Eng., 40, 521 Karanth, 2017, Shear and impact strength of waste plastic fibre reinforced concrete, Adv. Concr. Constr., 5, 173, 10.12989/acc.2017.5.2.173 Karthik, 2014, Experimental study on shear behaviour of hybrid Fibre Reinforced Concrete beams, KSCE J. Civ. Eng., 19, 259, 10.1007/s12205-013-2350-1 Karthikeyan, 2015, Analysis of compressive strength of concrete using polyethylene terephthalate [PET] fibres, Int. J. Appl. Eng. Res., 10, 34776 Kendall, 2008, Materials design for sustainability through life cycle modeling of engineered cementitious composites, Mater. Struct. Constr., 41, 1117, 10.1617/s11527-007-9310-5 Keyvani, 1997, Behavior of fiber concrete composites using recycled steel shavings, J. Solid Waste Technol. Manag., 24, 1 Khalid, 2017, Pull-out strength of polyethylene terephthalate bottle fibre in concrete matrix, Malaysian Constr. Res. J., 21, 75 Khaloo, 2015, Use of polymer fibres recovered from waste car timing belts in high performance concrete, Constr. Build. Mater., 80, 31, 10.1016/j.conbuildmat.2015.01.011 Kharbuki, 2017, Study on partial replacement of cement by fly ash, natural fine aggregates by sawdust, and coir as a fibre in concrete, Int. J. Mech. Eng. Technol., 8, 1669 Khasreen, 2009, Life-cycle assessment and the environmental impact of buildings: a review, Sustainability, 1, 674, 10.3390/su1030674 Khushnood, 2015, Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers, Frat. Ed. Integrità Strutt., 9, 534 Kim, 2010, Material and structural performance evaluation of recycled PET fiber reinforced concrete, Cement Concr. Compos., 32, 232, 10.1016/j.cemconcomp.2009.11.002 Kitcharoen, 2004, The importance-performance analysis of service quality in administrative departments of private universities in Thailand, ABAC J, 24, 20 Koo, 2014, Material and Structural performance evaluations of Hwangtoh admixtures and recycled PET fiber-added eco-friendly concrete for CO2 emission reduction, Materials (Basel), 7, 5959, 10.3390/ma7085959 Kumar, 2016, Studies on strength and weight loss of paper concrete, Proc. Inst. Civ. Eng. - Eng. Sustain., 169, 39 Kurup, 2017, Effect of recycled PVC fibers from electronic waste and silica powder on shear strength of concrete, J. Hazardous, Toxic, Radioact. Waste, 21 Kurup, 2017, Novel fibrous concrete mixture made from recycled PVC fibers from electronic waste, J. Hazardous, Toxic, Radioact. Waste, 21 Lee, 2005, Fatigue cracking resistance of fiber-reinforced asphalt concrete, Text. Res. J., 75, 123, 10.1177/004051750507500206 Lehne, 2018, 1 Lejano, 2017, Optimization of compressive strength of concrete with pig-hair fibers as fiber reinforcement and green Mussel shells as partial cement substitute, Int. J. Geomate., 12, 37, 10.21660/2017.31.6528 Leone, 2016, Experimental study on bond behavior in fiber-reinforced concrete with low content of recycled steel fiber, J. Mater. Civ. Eng., 28, 10.1061/(ASCE)MT.1943-5533.0001534 Li, 2004, Waste tire fiber modified concrete, Compos. B Eng., 35, 305, 10.1016/j.compositesb.2004.01.002 Li, 2016, Review of the performance of high-strength rubberized concrete and its potential structural applications, Adv. Civ. Eng. Mater., 5, 149 Li, 2004, Development of waste tire modified concrete, Cement Concr. Res., 34, 2283, 10.1016/j.cemconres.2004.04.013 Lieder, 2016, Towards circular economy implementation: a comprehensive review in context of manufacturing industry, J. Clean. Prod., 115, 36, 10.1016/j.jclepro.2015.12.042 Liu, 2017, Porous materials composed of flue gas desulfurization gypsum and textile fiber wastes, Waste and Biomass Valorization, 8, 203, 10.1007/s12649-016-9617-y Machovič, 2008, Raman micro-spectroscopy mapping and microstructural and micromechanical study of interfacial transition zone in concrete reinforced by poly(ethylene terephthalate) fibres, Ceram. - Silikaty, 52, 54 Machovič, 2013, Microstructure of interfacial transition zone between PET fibres and cement paste, Acta Geodyn. Geomater., 10, 121, 10.13168/AGG.2013.0012 Mahasneh, 2005, The effect of addition of fiber reinforcement on fire resistant composite concrete material, J. Appl. Sci., 5, 373 Malaiškiene, 2015, Possibilities to use textile cord waste from used tires for concrete, J. Environ. Eng. Landsc. Manag., 23, 183, 10.3846/16486897.2015.1057514 Mangat, 1988, Long term properties under marine exposure of steel fibre reinforced concrete containing pfa, Mater. Struct., 21, 352, 10.1007/BF02472161 Manivel, 2017, vol. 8, 1145 Marinković, 2017, Environmental assessment of green concretes for structural use, J. Clean. Prod., 154, 633, 10.1016/j.jclepro.2017.04.015 Martinelli, 2015, An experimental study on the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete, Constr. Build. Mater., 94, 290, 10.1016/j.conbuildmat.2015.07.007 Martínez-Barrera, 2017, Recycled cellulose from Tetra Pak packaging as reinforcement of polyester based composites, Constr. Build. Mater., 157, 1018, 10.1016/j.conbuildmat.2017.09.181 Mastali, 2016, Use of silica fume and recycled steel fibers in self-compacting concrete (SCC), Constr. Build. Mater., 125, 196, 10.1016/j.conbuildmat.2016.08.046 Mastali, 2016, The impact resistance and mechanical properties of self-compacting concrete reinforced with recycled CFRP pieces, Compos. B Eng., 92, 360, 10.1016/j.compositesb.2016.01.046 Mastali, 2017, Fresh and hardened properties of self-compacting concrete reinforced with hybrid recycled steel – polypropylene fiber, J. Mater. Civ. Eng., 29, 1, 10.1061/(ASCE)MT.1943-5533.0001851 Mastali, 2016, The impact resistance and mechanical properties of reinforced self-compacting concrete with recycled glass fibre reinforced polymers, J. Clean. Prod., 124, 312, 10.1016/j.jclepro.2016.02.148 Mastali, 2017, The impact resistance and mechanical properties of the reinforced self-compacting concrete incorporating recycled CFRP fiber with different lengths and dosages, Compos. B Eng., 112, 74, 10.1016/j.compositesb.2016.12.029 Mayring, 2003 Meddah, 2009, Properties of concrete reinforced with different kinds of industrial waste fibre materials, Constr. Build. Mater., 23, 3196, 10.1016/j.conbuildmat.2009.06.017 Medina, 2017, Mechanical and thermal properties of concrete incorporating rubber and fibres from tyre recycling, Constr. Build. Mater., 144, 563, 10.1016/j.conbuildmat.2017.03.196 Meena, 2014, An experimental study on fresh and hardened state properties of fibre reinforced Self Compacting Concrete using different types of fibres, OR Inf., 17, 2915 Mello, 2014, Improving concrete properties with fibers addition, Int. Sch. Sci. Res. Innov., 8, 245 Merli, 2018, How do scholars approach the circular economy? A systematic literature review, J. Clean. Prod., 178, 703, 10.1016/j.jclepro.2017.12.112 Meyer, 2004, Concrete materials and sustainable dvelopment in the USA, Struct. Eng. Int. J. Int. Assoc. Bridg. Struct. Eng. Meyer, 2009, The greening of the concrete industry, Cement Concr. Compos., 31, 601, 10.1016/j.cemconcomp.2008.12.010 Mo, 2016, Green concrete partially comprised of farming waste residues: a review, J. Clean. Prod., 10.1016/j.jclepro.2016.01.022 Mohamed, 2010, Valorization of micro-cellulose fibers in self-compacting concrete, Constr. Build. Mater., 24, 2473, 10.1016/j.conbuildmat.2010.06.009 Mohammadhosseini, 2017, The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres, Constr. Build. Mater., 143, 147, 10.1016/j.conbuildmat.2017.03.109 Mohammadhosseini, 2017, Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures, J. Clean. Prod., 144, 8, 10.1016/j.jclepro.2016.12.168 Mohammadhosseini, 2017, Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash, J. Clean. Prod., 144, 448, 10.1016/j.jclepro.2016.12.151 Murali, 2017, Weibull reliability analysis of impact resistance on selfcompacting concrete reinforced with recycled CFRP pieces, Romanian J. MAter., 47, 196 Myers, 2005, A review of construction companies’ attitudes to sustainability, Constr. Manag. Econ., 10.1080/01446190500184360 Naik, 2004, Use of pulp and paper mill residual solids in production of cellucrete, Cement Concr. Res., 34, 1229, 10.1016/j.cemconres.2003.12.013 Nehdi, 2004, Fiber synergy in fiber-reinforced self-consolidating concrete, ACI Mater. J., 101, 508 Nehdi, 2017, Novel eco-efficient Two-Stage Concrete incorporating high volume recycled content for sustainable pavement construction, Constr. Build. Mater., 146, 9, 10.1016/j.conbuildmat.2017.04.065 Neocleous, 2011, Fibre-reinforced roller compacted concrete transport pavements, Proc. Inst. Civ. Eng. Transp., 164, 97 Nibudey, 2015, A comparative study of various fibers and waste plastic fiber reinforced concrete, J. Struct. Eng., 42, 256 Ochi, 2007, Development of recycled PET fiber and its application as concrete-reinforcing fiber, Cement Concr. Compos., 29, 448, 10.1016/j.cemconcomp.2007.02.002 Ogi, 2005, Strength in concrete reinforced with recycled CFRP pieces, Compos. Part A Appl. Sci. Manuf., 36, 893, 10.1016/j.compositesa.2004.12.009 Othuman Mydin, 2015, Experimental study on the mechanical properties of coconut fibre reinforced lightweight foamed concrete, Environ. Sci., 6, 407 Otuoze, 2015, Assessment of dynamic modulus of high density polypropylene waste fiber reinforcement in asphalt concrete, Leonardo Electron. J. Pract. Technol., 14, 13 Ozerkan, 2016, Assessment of microstructural and mechanical properties of hybrid fibrous self-consolidating concretes using ingredients of plastic wastes, Nat. Environ. Pollut. Technol., 15 Ozger, 2013, Effect of nylon fibres on mechanical and thermal properties of hardened concrete for energy storage systems, Mater. Des., 51, 989, 10.1016/j.matdes.2013.04.085 Pacheco-Torgal, 2011, Cementitious building materials reinforced with vegetable fibres: a review, Constr. Build. Mater., 25, 575, 10.1016/j.conbuildmat.2010.07.024 Parameswaran, 1991, Fibre-reinforced concrete: a versatile construction material, Build. Environ., 26, 301, 10.1016/0360-1323(91)90054-F Pelisser, 2012, Mechanical properties of recycled PET fibers in concrete, Mater. Res., 15, 679, 10.1590/S1516-14392012005000088 Pelisser, 2010, Effect of the addition of synthetic fibers to concrete thin slabs on plastic shrinkage cracking, Constr. Build. Mater., 24, 2171, 10.1016/j.conbuildmat.2010.04.041 Pereira, 2017, Optimization of mechanical properties in concrete reinforced with fibers from solid urban wastes (PET bottles) for the production of ecological concrete, Constr. Build. Mater., 149, 837, 10.1016/j.conbuildmat.2017.05.148 Pešić, 2016, Mechanical properties of concrete reinforced with recycled HDPE plastic fibres, Constr. Build. Mater., 115, 362, 10.1016/j.conbuildmat.2016.04.050 Petek Gursel, 2014, Life-cycle inventory analysis of concrete production: a critical review, Cement Concr. Compos., 51, 38, 10.1016/j.cemconcomp.2014.03.005 Prem Kumar, 2014, A study on strength characteristics of concrete using polyethylene waste as a fibre, Int. J. Appl. Eng. Res., 9, 5439 Pujadas, 2014, Plastic fibres as the only reinforcement for flat suspended slabs: experimental investigation and numerical simulation, Constr. Build. Mater., 57, 92, 10.1016/j.conbuildmat.2014.01.082 Rashid, 2017, Influence of steel fibers extracted from waste tires on shear behavior of reinforced concrete beams, Struct. Concr., 18, 589, 10.1002/suco.201600194 Rebeiz, 1993, vol. 5, 237 Reis, 2006, Fracture and flexural characterization of natural fiber-reinforced polymer concrete, Constr. Build. Mater., 20, 673, 10.1016/j.conbuildmat.2005.02.008 Rhee, 2017, Mechanical and electrical properties of cement paste incorporated with Pitch-Based carbon fiber, Carbon Lett, 23, 22 Rinu Isah, 2017, Utilization of waste pet bottle fibres in reinforced concrete, Int. J. Pure Appl. Math., 116, 579 Ruben, 2014, Behavioural study on latex treated waste coir fiber in concrete composites, Pollut. Res., 33, 233 Sadrmomtazi, 2012, Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash, Constr. Build. Mater., 35, 211, 10.1016/j.conbuildmat.2012.02.049 Salim, 2019, A systematic literature review of internal capabilities for enhancing eco-innovation performance of manufacturing firms, J. Clean. Prod., 10.1016/j.jclepro.2018.11.105 Sánchez, 2016, Bibliometric analysis of publications on wine tourism in the databases Scopus and WoS, Eur. Res. Manag. Bus. Econ., 1 Sarabi, 2017, Thermal stress control using waste steel fibers in massive concretes, Eur. Phys. J. Plus, 132, 491, 10.1140/epjp/i2017-11758-3 Schmidt, 2008, Concrete with carpet recyclates: suitability assessment by surface energy evaluation, Waste Manag., 28, 1182, 10.1016/j.wasman.2007.05.005 Schwarzova, 2017, Lightweight composites based on technical hemp hurds in construction industry, Chem. Eng. Trans., 57, 1369 Sebaibi, 2014, Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders, Constr. Build. Mater., 65, 254, 10.1016/j.conbuildmat.2014.04.134 Sekar, 2004, Fibre reinforced concrete from industrial waste fibres - a feasibility study, J. Inst. Eng. Civ. Eng. Div., 84, 287 Sengul, 2016, Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires, Constr. Build. Mater., 122, 649, 10.1016/j.conbuildmat.2016.06.113 Serdar, 2014, Possibilities of use of products from waste tyre recycling in concrete industry, J. Appl. Eng. Sci., 12, 89, 10.5937/jaes12-5671 Serdar, 2015, Shrinkage behaviour of fibre reinforced concrete with recycled tyre polymer fibres, Int. J. Polym. Sci., 10.1155/2015/145918 Seuring, 2008, From a literature review to a conceptual framework for sustainable supply chain management, J. Clean. Prod., 16, 1699, 10.1016/j.jclepro.2008.04.020 Sharma, 2016, Use of different forms of waste plastic in concrete - a review, J. Clean. Prod., 10.1016/j.jclepro.2015.08.042 Sharma, 2017, Impact of partial replacement of cement with rice husk ash and proportionate addition of coconut fibre on concrete, Int. J. Mech. Eng. Technol., 8, 1806 Sharma, 2017, The study of strength characteristic of concrete by adding coir fibre and replacement of steel slag, Int. J. Mech. Eng. Technol., 8, 1814 Shi, 2007, A review on the use of waste glasses in the production of cement and concrete, Resour. Conserv. Recycl., 52, 234, 10.1016/j.resconrec.2007.01.013 Shukla, 2013, Agri-fresh produce supply chain management: a state-of-the-art literature review, Int. J. Oper. Prod. Manag., 33, 114, 10.1108/01443571311295608 Sivaraja, 2010, Potential reuse of waste rice husk as fibre composites in concrete, Asian J. Civ. Eng., 12, 205 Sivaraja, 2010, Mechanical strength of fibrous concrete with waste rural materials, J. Sci. Ind. Res. (India), 69, 308 Sodhi, 2017, Utilising wastes as partial replacement in concrete - a review, Int. J. Civ. Eng. Technol., 8, 636 Sofi, 2017, Effect of waste tyre rubber on mechanical and durability properties of concrete - a review, Ain Shams Eng. J. Soroushian, 2003, Assessment of reinforcing effects of recycled plastic and paper in concrete, ACI Mater. J., 100, 203 Sotoudeh, 2013, Effects of waste steel fibers on strength and stress-strain behavior of concrete incorporating silica nanopowder, Indian J. Sci. Technol., 6, 5411, 10.17485/ijst/2013/v6i11.4 Spadea, 2014, Energy dissipation capacity of concretes reinforced with recycled PET fibers, Ing. Sismica, 31, 61 Stier, 1998, A study conducted to investigate the feasibility of recycling commingled plastics fiber in concrete, J. Ind. Technol., 15 Subramaniaprasad, 2015, Influence of embedded waste-plastic fibers on the improvement of the tensile strength of stabilized mud masonry blocks, J. Mater. Civ. Eng., 27, 10.1061/(ASCE)MT.1943-5533.0001165 Sumathi, 2015, Study on the strength and durability characteristics of high strength concrete with steel fibers, Int. J. ChemTech Res., 8, 241 Thirumurugan, 2013, Workability and strength properties of hybrid fibre reinforced concrete from industrial waste, Asian J. Civ. Eng., 14, 477 Thirumurugan, 2015, Strength and fracture properties of hybrid fibre reinforced concrete, IJST, Trans. Civ. Eng., 39, 273 Tlemat, 2006, Stress-strain characteristic of SFRC using recycled fibres, Mater. Struct. Constr., 39, 365, 10.1007/s11527-005-9009-4 Torkaman, 2014, Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks, Constr. Build. Mater., 50, 432, 10.1016/j.conbuildmat.2013.09.044 Turk, 2015, Environmental evaluation of green concretes versus conventional concrete by means of LCA, Waste Manag., 45, 194, 10.1016/j.wasman.2015.06.035 Ucar, 2011, Utilization of recycled post consumer carpet waste fibers as reinforcement in lightweight cementitious composites, Int. J. Cloth. Sci. Technol., 23, 242, 10.1108/09556221111136502 United Nations, 2015 Usman, 2016, Reinforcement of asphalt concrete mixture using recycle polyethylene terephthalate fibre, Indian J. Sci. Technol., 9, 10.17485/ijst/2016/v9i46/107143 Van Den Heede, 2012, Environmental impact and life cycle assessment (LCA) of traditional and “green” concretes: literature review and theoretical calculations, Cement Concr. Compos., 34, 431, 10.1016/j.cemconcomp.2012.01.004 van Eck, 2010, Software survey: VOSviewer, a computer program for bibliometric mapping, Scientometrics, 10.1007/s11192-009-0146-3 Vasudev, 2014, Experimental studies of the application of turn steel scraps as fibres in concrete - a rehabilitative approach, Int. J. Eng. Technol., 6, 1885 Vasudev, 2014, Studies on flexural behaviour of beams with turn steel scrap as fibres – an ecofriendly approach, Int. J. Earth Sci. Eng., 7, 2055 Vieira, 2016, Life cycle assessment (LCA) applied to the manufacturing of common and ecological concrete: a review, Constr. Build. Mater., 124, 656, 10.1016/j.conbuildmat.2016.07.125 Vijaya, 2016, The behaviour of self compacting concrete with waste plastic fibers when subjected to acid attack, Int. J. Eng. Technol., 8, 1521 Vishnu, 2017, Use of polyethylene terephthalate in concrete - a brief review, Int. J. Civ. Eng. Technol., 8, 1171 Walraven, 2009, High performance fiber reinforced concrete: progress in knowledge and design codes, Mater. Struct., 42, 1247, 10.1617/s11527-009-9538-3 Wang, 1997, Concrete reinforcement with recycled fibers from carpet industrial waste, J. Mater. Civ. Eng., 9, 103, 10.1061/(ASCE)0899-1561(1997)9:3(103) Wang, 1998, Toughness characteristics of synthetic fibre-reinforced cementitious composites, Fatigue Fract. Eng. Mater. Struct., 21, 521, 10.1046/j.1460-2695.1998.00045.x Wang, 1999, Utilization of recycled carpet waste fibers for reinforcement of concrete and soil, Polym. Plast. Technol. Eng., 38, 533, 10.1080/03602559909351598 Wang, 2000, Concrete reinforcement with recycled fibers, J. Mater. Civ. Engeneering, 12, 314, 10.1061/(ASCE)0899-1561(2000)12:4(314) Wang, 1994, Properties of fibre reinforced concrete using recycled fibres from carpet industrial waste, J. Mater. Sci., 29, 4191, 10.1007/BF00414198 Watkins, 2010, Innovative use potential of industrial residues from the steel, paper and pulp industries - a preliminary study, Prog. Ind. Ecol., 7, 185, 10.1504/PIE.2010.037775 Webster, 2002, Analyzing the past to prepare for the Future : writing a literature review, MIS Q., 26, 13 Wong, 2018, VOSviewer, Tech. Serv. Q., 10.1080/07317131.2018.1425352 Xue, 2013, Rubberized concrete: a green structural material with enhanced energy-dissipation capability, Constr. Build. Mater., 42, 196, 10.1016/j.conbuildmat.2013.01.005 Yang, 2010, Man-made vitreous fiber produced from incinerator ash using the thermal plasma technique and application as reinforcement in concrete, J. Hazard Mater., 182, 191, 10.1016/j.jhazmat.2010.06.014 Yazdanbakhsh, 2017, FRP-Needles as discrete reinforcement in concrete, J. Mater. Civ. Eng., 29, 10.1061/(ASCE)MT.1943-5533.0002033 Yin, 2015, Post-cracking performance of recycled polypropylene fibre in concrete, Constr. Build. Mater., 101, 1069, 10.1016/j.conbuildmat.2015.10.056 Yin, 2016, Comparative evaluation of virgin and recycled polypropylene fibre reinforced concrete, Constr. Build. Mater., 114, 134, 10.1016/j.conbuildmat.2016.03.162 Yin, 2015, Fiber preparation and mechanical properties of recycled polypropylene for reinforcing concrete, J. Appl. Polym. Sci., 132, 10.1002/app.41866 Yin, 2016, A life cycle assessment of recycled polypropylene fibre in concrete footpaths, J. Clean. Prod., 112, 2231, 10.1016/j.jclepro.2015.09.073 Yin, 2015, Use of macro plastic fibres in concrete: a review, Constr. Build. Mater., 10.1016/j.conbuildmat.2015.05.105 Younis, 2013, Strength prediction model and methods for improving recycled aggregate concrete, Constr. Build. Mater., 49, 688, 10.1016/j.conbuildmat.2013.09.003 Yuzer, 2013, Influence of raw rice husk addition on structure and properties of concrete, Constr. Build. Mater., 44, 54, 10.1016/j.conbuildmat.2013.02.070 Zamanzadeh, 2015, Recycled steel fibre reinforced concrete failing in bending and in shear, Constr. Build. Mater., 85, 195, 10.1016/j.conbuildmat.2015.03.070 Zollo, 1997, Fiber-reinforced concrete: an overview after 30 years of development, Cement Concr. Compos., 19, 107, 10.1016/S0958-9465(96)00046-7