Mechanical and textural properties of pelvic trabecular bone

Ashman, 1989, Anatomical variation of orthotropic elastic moduli of the proximal human tibia, J. Biomechanics, 22, 895, 10.1016/0021-9290(89)90073-0 Cowin, 1985, The relationship between the elasticity tensor and the fabric tensor, Mech. Mat., 4, 137, 10.1016/0167-6636(85)90012-2 Cowin, 1986, Thermodynamic restrictions on the elastic constants of bone, J. Biomechanics, 19, 85, 10.1016/0021-9290(86)90112-0 Dalstra, 1990, The pelvic bone as a sandwich construction; a three dimensional finite element study, 7, B32 Evans, 1961, Regional differences in some physical properties of human spongy bone, 19 Gibson, 1985, The mechanical behaviour of cancellous bone, J. Biomechanics, 18, 317, 10.1016/0021-9290(85)90287-8 Goel, 1978, Stresses in the normal pelvis, Comput. Biol. Med., 8, 91, 10.1016/0010-4825(78)90001-X Harrigan, 1984, Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor, J. Mater. Sci., 19, 761, 10.1007/BF00540446 Hodgskinson, 1990, Effects of structural variation on Young's modulus of non-human cancellous bone, 204, 43 Huiskes, 1987, Finite element analysis of acetabular reconstruction-non-cemented threaded cups, Acta Orthop. Scand., 58, 620, 10.3109/17453678709146499 Kalender, 1987, A calibration phantom for quantitative computed tomography, Med. Phys., 14, 863, 10.1118/1.596013 Kalender, 1989, Reference values for trabecular and cortical vertebral bone density in single and dual-energy quantitative computed tomography, Eur. J. Radiol., 9, 75 Lang, 1988, Correlation of mechanical properties of vertebral trabecular bone with equivalent mineral density as measured by computed tomography, J. Bone Jt Surg., 70A, 1531, 10.2106/00004623-198870100-00013 Linde, 1988, Mechanical properties of trabecular bone by a non-destructive testing approach, Engng Med., 17, 23, 10.1243/EMED_JOUR_1988_017_008_02 Linde, 1989, The effect of constraint on the mechanical behaviour of trabecular bone specimens, J. Biomechanics, 22, 485, 10.1016/0021-9290(89)90209-1 Linde, 1990, The effect of specimen size and geometry on the mechanical behaviour of trabecular bone, 7, A25 Linde, 1990, Three-axial strain controlled testing applied to bone specimens from the proximal tibial epiphysis, J. Biomechanics, 23, 1167, 10.1016/0021-9290(90)90009-R McBroom, 1985, Prediction of vertebral body compressive fracture using quantitative computed tomography, J. Bone Jt Surg., 67A, 1206, 10.2106/00004623-198567080-00010 Odgaard, 1990, A direct method for fast three-dimensional serial reconstruction, J. Microscopy, 159, 335, 10.1111/j.1365-2818.1990.tb03038.x Odgaard, 1991, The underestimation of Young's modulus in compressive testing of cancellous bone specimens, J. Biomechanics, 24, 691, 10.1016/0021-9290(91)90333-I Oonishi, 1983, Mechanical analysis of the human pelvis and its application to the articular hip joint—by means of the three dimensional finite element method, J. Biomechanics, 16, 427, 10.1016/0021-9290(83)90075-1 Oonishi, 1986, Biomechanical studies on fixations of an artificial hip joint acetabular socket by means of 2D-FEM, 513 Pedersen, 1982, An axisymmetric model of acetabular components in total hip arthroplasty, J. Biomechanics, 15, 305, 10.1016/0021-9290(82)90176-2 Rapperport, 1985, Contact finite element stress analysis of the hip joint, J. orthop. Res., 3, 435, 10.1002/jor.1100030406 Snyder, 1989, Anisotropic structure—property relations for trabecular bone, ORS Trans., 14, 265 Strang, 1986 Turner, 1988, The dependence of the elastic constants of cancellous bone upon structural density and fabric, ORS Trans., 13, 74 Turner, 1990, The fabric dependence of the orthotropic elastic constants of cancellous bone, J. Biomechanics, 23, 549, 10.1016/0021-9290(90)90048-8 Turner, 1992, On Wolff's law of trabecular architecture, J. Biomechanics, 25, 1, 10.1016/0021-9290(92)90240-2 Vasu, 1982, Stress distributions in the acetabular region—I. Before and after total joint replacement, J. Biomechanics, 15, 155, 10.1016/0021-9290(82)90247-0