3-D microstructure reconstruction of polymer nano-composite using FIB–SEM and statistical correlation function

Fullwood, 2008, Microstructure reconstructions from 2-point statistics using phase-recovery algorithms, Acta Mater, 56, 942, 10.1016/j.actamat.2007.10.044 Gommes, 2012, Microstructural degeneracy associated with a two-point correlation function and its information content, Phys Rev E, 85, 051140, 10.1103/PhysRevE.85.051140 Chen, 2007, A critical appraisal of polymer–clay nanocomposites, Chem Soc Rev, 37, 568, 10.1039/B702653F Alexandre, 2000, Polymer–layered silicate nanocomposites: preparation, properties and uses of a new class of materials, Mater Sci Eng: R: Rep, 28, 1, 10.1016/S0927-796X(00)00012-7 Sinha Ray, 2003, Polymer/layered silicate nanocomposites: a review from preparation to processing, Prog Polym Sci, 28, 1539, 10.1016/j.progpolymsci.2003.08.002 Kojima, 1993, Mechanical properties of nylon 6-clay hybrid, J Mater Res, 8, 1185, 10.1557/JMR.1993.1185 Messersmith, 1994, Synthesis and characterization of layered silicate–epoxy nanocomposites, Chem Mater, 6, 1719, 10.1021/cm00046a026 Giannelis, 1996, Polymer layered silicate nanocomposites, Adv Mater, 8, 29, 10.1002/adma.19960080104 Okada, 1995, The chemistry of polymer–clay hybrids, Mater Sci Eng: C, 3, 109, 10.1016/0928-4931(95)00110-7 Schmidt, 2002, New advances in polymer/layered silicate nanocomposites, Curr Opin Solid State Mater Sci, 6, 205, 10.1016/S1359-0286(02)00049-9 Yano, 1997, Synthesis and properties of polyimide-clay hybrid films, J Polym Sci Part A: Polym Chem, 35, 2289, 10.1002/(SICI)1099-0518(199708)35:11<2289::AID-POLA20>3.0.CO;2-9 Bharadwaj, 2001, Modeling the barrier properties of polymer–layered silicate nanocomposites, Macromolecules, 34, 9189, 10.1021/ma010780b Gilman, 1999, Flammability and thermal stability studies of polymer layered–silicate (clay) nanocomposites1, Appl Clay Sci, 15, 31, 10.1016/S0169-1317(99)00019-8 Schmidt, 2003, Properties of polymer–nanoparticle composites, Curr Opin Colloid Interface Sci, 8, 103, 10.1016/S1359-0294(03)00008-6 Afaghi Khatibi, 2008, A study on the nanoindentation behaviour of single crystal silicon using hybrid MD-FE method, Adv Mater Res, 32, 3 Haile, 1992 Komanduri, 2001, Molecular dynamics (MD) simulation of uniaxial tension of some single-crystal cubic metals at nanolevel, Int J Mech Sci, 43, 2237, 10.1016/S0020-7403(01)00043-1 Mortazavi, 2009, Molecular dynamics investigation of loading rate effects on mechanical-failure behaviour of FCC metals, J Comput Theor Nanosci, 6, 644, 10.1166/jctn.2009.1087 Torquato, 1997, Effective stiffness tensor of composite media–I. Exact series expansions, J Mech Phys Solids, 45, 1421, 10.1016/S0022-5096(97)00019-7 Pham, 2003, Strong-contrast expansions and approximations for the effective conductivity of isotropic multiphase composites, J Appl Phys, 94, 6591, 10.1063/1.1619573 Nemat-Nasser, 1999, vol. 2 Dumont, 1987, Damage mechanics for 3-D composites, Compos Struct, 8, 119, 10.1016/0263-8223(87)90008-0 Hori, 1999, Generalized Hashin–Shtrikman variational principle for boundary-value problem of linear and non-linear heterogeneous body, Mech Mater, 31, 471, 10.1016/S0167-6636(99)00013-7 Affdl, 1976, The Halpin–Tsai equations: a review, Polym Eng Sci, 16, 344, 10.1002/pen.760160512 Sheng, 2004, Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle, Polymer, 45, 487, 10.1016/j.polymer.2003.10.100 Zhu, 2004, Numerical simulation of the tensile modulus of nanoclay-filled polymer composites, J Polym Sci Part B: Polym Phys, 42, 2391, 10.1002/polb.20112 Fertig, 2004, Influence of constituent properties and microstructural parameters on the tensile modulus of a polymer/clay nanocomposite, Compos Sci Technol, 64, 2577, 10.1016/j.compscitech.2004.06.002 Dong, 2008, Experimental characterisation and object-oriented finite element modelling of polypropylene/organoclay nanocomposites, Compos Sci Technol, 68, 2864, 10.1016/j.compscitech.2007.10.026 Hsueh, 1999, Analytical and numerical analyses for two-dimensional stress transfer, Mater Sci Eng: A, 268, 1, 10.1016/S0921-5093(99)00129-X Cannillo, 2002, Numerical models for thermal residual stresses in Al2O3 platelets/borosilicate glass matrix composites, Mater Sci Eng A, 323, 246, 10.1016/S0921-5093(01)01345-4 Cannillo, 2003, Numerical modelling of the fracture behaviour of a glass matrix composite reinforced with alumina platelets, Compos Part A: Appl Sci Manuf, 34, 43, 10.1016/S1359-835X(02)00230-0 Wang, 2003, Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings, Acta Mater, 51, 5319, 10.1016/S1359-6454(03)00390-2 Ray, 2010, A new possibility for microstructural investigation of clay-based polymer nanocomposite by focused ion beam tomography, Polymer, 51, 3966, 10.1016/j.polymer.2010.06.025 Velichko, 2007, 3D characterization of graphite morphologies in cast iron, Adv Eng Mater, 9, 39, 10.1002/adem.200600175 Faessel, 2005, 3D Modelling of random cellulosic fibrous networks based on X-ray tomography and image analysis, Compos Sci Technol, 65, 1931, 10.1016/j.compscitech.2004.12.038 Deng, 2012, Utilizing real and statistically reconstructed microstructures for the viscoelastic modeling of polymer nanocomposites, Compos Sci Technol, 10.1016/j.compscitech.2012.03.020 Baniassadi, 2011, Mechanical and thermal behavior of nanoclay based polymer nanocomposites using statistical homogenization approach, Compos Sci Technol, 71, 1930, 10.1016/j.compscitech.2011.09.008 Baniassadi, 2011, Statistical continuum theory for the effective conductivity of carbon nanotubes filled polymer composites, Thermochim Acta, 520, 33, 10.1016/j.tca.2011.02.037 Baniassadi, 2012, Three-dimensional reconstruction and homogenization of heterogeneous materials using statistical correlation functions and FEM, Comput Mater Sci, 51, 372, 10.1016/j.commatsci.2011.08.001 Fullwood, 2008, A strong contrast homogenization formulation for multi-phase anisotropic materials, J Mech Phys Solids, 56, 2287, 10.1016/j.jmps.2008.01.003 Hamedani, 2011, Microstructure, property and processing relation in gradient porous cathode of solid oxide fuel cells using statistical continuum mechanics, J Power Sour, 196, 6325, 10.1016/j.jpowsour.2011.03.046 Torquato, 2002, 10.1007/978-1-4757-6355-3 Baniassadi, 2012, New approximate solution for N-point correlation functions for heterogeneous materials, J Mech Phys Solids, 60, 104, 10.1016/j.jmps.2011.09.009 Baniassadi, 2011, Three-phase solid oxide fuel cell anode microstructure realization using two-point correlation functions, Acta Mater, 59, 30, 10.1016/j.actamat.2010.08.012 Baniassadi, 2011, New approximate solution for N-point correlation functions for heterogeneous materials, J Mech Phys Solids Garmestani, 2009, Semi-inverse Monte Carlo reconstruction of two-phase heterogeneous material using two-point functions, Int J Theor Appl Multiscale Mech, 1, 134, 10.1504/IJTAMM.2009.029210 Guimarães, 2010, Structural electronic and mechanical properties of single-walled halloysite nanotube models, J Phys Chem C, 114, 11358, 10.1021/jp100902e Lu, 2011, Direct measurements of the young’s modulus of a single halloysite nanotube using a transmission electron microscope with a bending stage, J Nanosci Nanotechnol, 11, 7789, 10.1166/jnn.2011.4720 Kojima, 1993, Mechanical properties of nylon 6-clay hybrid, J Mater Res (USA), 8, 1185, 10.1557/JMR.1993.1185 Mesbah, 2009, Experimental characterization and modeling stiffness of polymer/clay nanocomposites within a hierarchical multiscale framework, J Appl Polym Sci, 114, 3274, 10.1002/app.30547 Manwart, 2000, Stochastic reconstruction of sandstones, Phys Rev E, 62, 893, 10.1103/PhysRevE.62.893 Ghazavizadeh, 2012, Composition of two-point correlation functions of subcomposites in heterogeneous materials, Mech Mater, 10.1016/j.mechmat.2012.04.009