Wetting of polypropylene hollow fiber membrane contactors

Mandal, 2006, Absorption of carbon dioxide into aqueous blends of 2-amino-2-methyl-1-propanol and monoethanolamine, Chem. Eng. Sci., 61, 5440, 10.1016/j.ces.2006.04.002 Gray, 2008, Performance of immobilized tertiary amine solid sorbents for the capture of carbon dioxide, Int. J. Greenhouse Gas Control, 2, 3, 10.1016/S1750-5836(07)00088-6 Northrop, 2009, The CFZ™ process: a cryogenic method for handling high-CO2 and -H2S gas reserves and facilitating geosequestration of CO2 and acid gases, Energy Procedia, 1, 171, 10.1016/j.egypro.2009.01.025 Zhao, 2008, A parametric study of CO2/N2 gas separation membrane processes for post-combustion capture, J. Membr. Sci., 325, 284, 10.1016/j.memsci.2008.07.058 deMontigny, 2005, Comparing the absorption performance of packed columns and membrane contactors, Ind. Eng. Chem. Res., 44, 5726, 10.1021/ie040264k Karoor, 1993, Gas absorption studies in microporous hollow fibre membrane modules, Ind. Eng. Chem. Res., 32, 674, 10.1021/ie00016a014 Gabelman, 1999, Hollow fiber membrane contactors, J. Membr. Sci., 159, 61, 10.1016/S0376-7388(99)00040-X Feron, 1995, Capture of carbon dioxide using membrane gas absorption and reuse in the horticultural industry, Energy Convers. Manage., 36, 411, 10.1016/0196-8904(95)00032-9 Klaassen, 2005, Membrane contactors in industrial applications, Chem. Eng. Res. Des., 83, 234, 10.1205/cherd.04196 CO2 Capture Project (CCP) website, Available from: http://www.CO2captureproject.org/index.htm. Li, 2005, Review of CO2 absorption using chemical solvents in hollow fiber membrane contactors, Sep. Purif. Technol., 41, 109, 10.1016/j.seppur.2004.09.008 Hanish, 1999, Exploring options for CO2 capture and management, Environ. Sci. Technol., 33, 66, 10.1021/es992680f Feron, 1999, Techno-economic assessment of membrane gas absorption for the production of carbon dioxide from flue gas, 53 Klaassen, 2005, Membrane contactors in industrial applications, Chem. Eng. Res. Des, 83, 234, 10.1205/cherd.04196 Zhang, 2008, Theoretical and experimental studies of membrane wetting in the membrane gas–liquid contacting process for CO2 absorption, J. Membr. Sci., 308, 162, 10.1016/j.memsci.2007.09.050 Keshavarz, 2008, Gas analysis of CO2 separation and simulation of a partially wetted hollow fiber membrane contactor, J. Hazard. Mater., 152, 1237, 10.1016/j.jhazmat.2007.07.115 Lu, 2008, Wetting mechanism in mass transfer process of hydrophobic membrane gas absorption, J. Membr. Sci., 308, 180, 10.1016/j.memsci.2007.09.051 Kreulen, 1993, Determination of mass transfer rates in wetted and non-wetted microporous membranes, Chem. Eng. Sci., 48, 2093, 10.1016/0009-2509(93)80084-4 Mahmud, 2004, The air-phase mass transfer resistance in the lumen of a hollow fiber at low air flow, Chem. Eng. J., 97, 69, 10.1016/S1385-8947(03)00111-6 Mahmud, 2000, A study of mass transfer in the membrane air-stripping process using microporous polypropylene, J. Membr. Sci., 179, 29, 10.1016/S0376-7388(00)00381-1 Mavroudi, 2006, A study of mass transfer resistance in membrane gas–liquid contacting process, J. Membr. Sci., 272, 103, 10.1016/j.memsci.2005.07.025 Wang, 2004, Impact of DEA solutions with and without CO2 loading on porous polypropylene membranes intended for use as contactors, J. Membr. Sci., 229, 147, 10.1016/j.memsci.2003.10.022 Porcheron, 2009, Hollow fiber membrane contactor transient experiments for the characterization of gas/liquid thermodynamics and mass transfer properties, Chem. Eng. Sci., 64, 265, 10.1016/j.ces.2008.09.035 Rangwala, 1996, Absorption of carbon dioxide into aqueous solutions using hollow fiber membrane contactors, J. Membr. Sci., 112, 229, 10.1016/0376-7388(95)00293-6 Mavroudi, 2003, Reduction of CO2 emissions by a membrane contacting process, Fuel, 82, 2153, 10.1016/S0016-2361(03)00154-6 Mariz, 1998, Carbon dioxide recovery: large-scale design trends, J. Can. Pet. Technol., 37, 42, 10.2118/98-07-04 Chapel, 1999, Recovery of CO2 from flue gases: commercial trends Barchas, 1992, The Kerr–McGee/ABB lummus crest technology for recovery of CO2 from stack gases, Energy Convers. Manage., 33, 333, 10.1016/0196-8904(92)90028-U Weiland, 2003, Effective amine technology: controlling selectivity, increasing slip, and reducing sulfur Khayet, 2002, Study on the effect of a non-solvent additive on the morphology and performance of ultrafiltration hollow fiber membranes, Desalination, 148, 321, 10.1016/S0011-9164(02)00724-5 Kumar, 2002, New absorption liquids for the removal of CO2 from dilute gas streams using membrane contactor, Chem. Eng. Sci., 57, 1639, 10.1016/S0009-2509(02)00041-6 Stamatialis, 1999, Atomic force microscopy of dense and asymmetric cellulose-based membranes, J. Membr. Sci., 160, 235, 10.1016/S0376-7388(99)00089-7 Chung, 2002, Visualization of the effect of die shear rate on the outer surface morphology of ultrafiltration membranes by AFM, J. Membr. Sci., 196, 251, 10.1016/S0376-7388(01)00609-3 Barbe, 2000, Surface morphology changes during initial usage of hydrophobic, microporous polypropylene membranes, J. Membr. Sci., 172, 149, 10.1016/S0376-7388(00)00338-0 Williams, 1980 Kamo, 1992, Solvent induced morphological change of microporous hollow fiber membranes, J. Membr. Sci., 70, 217, 10.1016/0376-7388(92)80107-U Tarleton, 2006, Solvent-induced swelling of membranes – measurements and influence in nanofiltration, J. Membr. Sci., 280, 442, 10.1016/j.memsci.2006.01.050 Wan, 2002, Swelling determination of W/O/W emulsion liquid membranes, J. Membr. Sci., 196, 185, 10.1016/S0376-7388(01)00554-3 Yang, 2007, Effect of hollow fiber morphology and compatibility on propane/propylene separation, J. Membr. Sci., 304, 88, 10.1016/j.memsci.2007.07.005 Franco, 2009, Effect of amine degradation products on the membrane gas absorption process, Chem. Eng. Sci., 64, 4016, 10.1016/j.ces.2009.06.012 Verreck, 2007, The effect of supercritical CO2 as a reversible plasticizer and foaming agent on the hot stage extrusion of itraconazole with EC 20 cps, J. Supercrit. Fluids, 40, 153, 10.1016/j.supflu.2006.05.005 Vázquez, 1997, Surface tension of binary mixtures of water+monoethanolamine and water+2-amino-2-methyl-1-propanol and tertiary mixtures of these amines with water from 25°C to 50°C, J. Chem. Eng. Data, 42, 57, 10.1021/je960238w Rinker, 1994, Viscosity, density, and surface tension of binary mixtures of water and N-methyldiethanolamine and water and diethanolamine and tertiary mixtures of these amines with water over the temperature range 20–100°C, J. Chem. Eng. Data, 39, 392, 10.1021/je00014a046 Yan, 2007, Experimental study on the separation of CO2 from flue gas using hollow fiber membrane contactors without wetting, Fuel Process. Technol., 88, 501, 10.1016/j.fuproc.2006.12.007 Chen, 2009, Surface modification of polyvinylidene fluoride (PVDF) membranes by low-temperature plasma with grafting styrene, Plasma Sci. Technol., 11, 42, 10.1088/1009-0630/11/1/09 Feron, 1995, Capture of carbon dioxide using membrane gas-absorption and reuse in the horticultural industry, Energy Convers. Manage., 36, 411, 10.1016/0196-8904(95)00032-9 Feron, 2002, CO2 separation with polyolefin membrane contactors and dedicated absorption liquid: performance and prospects, Sep. Purif. Technol., 27, 231, 10.1016/S1383-5866(01)00207-6 Ma’mun, 2007, Selection of new absorbents for carbon dioxide capture, Energy Convers. Manage., 48, 251, 10.1016/j.enconman.2006.04.007 Dindore, 2004, Membrane-solvent selection for CO2 removal using membrane gas–liquid contactors, Sep. Purif. Technol., 40, 133, 10.1016/j.seppur.2004.01.014 Nishikawa, 1995, CO2 removal by hollow fiber gas–liquid contactor, Energy Convers. Manage., 36, 415, 10.1016/0196-8904(95)00033-A Franco, 2008, Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating, J. Membr. Sci., 318, 107, 10.1016/j.memsci.2008.02.032