Contribution to the modelling of interfaces in masonry construction

Orduna, 2005, Three-dimensional limit analysis of rigid blocks assemblages. Part II: load-path following solution procedure and validation, Int J Solids Struct, 42, 5161, 10.1016/j.ijsolstr.2005.02.011 Lourenço, 2004, Shear testing of stack bonded masonry, Construct Build Mater, 18, 125, 10.1016/j.conbuildmat.2003.08.018 Anthoine, 1995, Shear-compression testing and analysis of brick masonry walls, vol. 3, 1657 Benedetti, 1984, A numerical model for seismic analysis of masonry building: experimental correlations, Earthquake Eng Struct Dyn, 12, 817, 10.1002/eqe.4290120608 Del Piero, 1987, Constitutive equation and compatibility of the external loads for linearly elastic masonry-like materials, Meccanica, 24, 150, 10.1007/BF01559418 Lotfi, 1991, An appraisal of smeared crack models for masonry shear wall analysis, Comput Struct, 41, 413, 10.1016/0045-7949(91)90134-8 Gambarotta, 1997, Damage models for the seismic response of brick masonry shear walls. Part I: the mortar joint model and its applications, Earthquake Eng Struct Dyn, 26, 42339 Raous, 1999, A consistent model coupling adhesion, friction and unilateral contact, Comput Methods Appl Mech Eng, 177, 383, 10.1016/S0045-7825(98)00389-2 Gabor A. Contribution à la caractérisation et à la modélisation des maçonnerie non renforcées et renforcées par matériaux composites. PhD thesis, Université Claude Bernard Lyon 1; 2002. NF EN 772-1. Norme Européenne, Norme Française, Méthodes d’essai des éléments de maçonnerie – Partie 1: détermination de la résistance à la compression; 2001. NF EN 1052-3. Norme Européenne, Norme Française, Méthodes d’essai de la maçonnerie – Partie 3: détermination de la résistance initiale au cisaillement; 2003. Francfort, 1998, Revisiting brittle fracture as an energy minimization problem, J Mech Phys Solids, 80, 1319, 10.1016/S0022-5096(98)00034-9 Monerie, 2000, A model coupling adhesion to friction for the interaction between a crack and a fiber/matrix interface, Z A M M, 80, 205 Frémond, 1987, Adhérence des solides, J Mec Theor Appl, 6, 383 Stainier L, Dubois F, Peyroux R. Matlib, Une bibiliothèque portable de modèles constitutifs pour la mécanique non-linéaire des solides: concepts et implémentation. In: 16ème French CSMA Conf. Giens; 2003, p. 20–3. Moreau, 1973, On unilateral constraints friction and plasticity, vol. 302, 175 Moreau, 1988, Unilateral contact and dry friction in finite freedom dynamics, vol. 302, 1 Jean, 1995 Gabor, 2005, Analysis of the inplane shear behaviour of FRP reinforced hollow brick masonry walls, Struct Eng Mech, 19, 237, 10.12989/sem.2005.19.3.237 LUMB6. Diagonal tensile strength tests of small wall specimens. Technical Report, RILEM; 1994. Gabor, 2006, Modelling approaches of the in-plane shear behaviour of unreinforced and FRP strengthened masonry panels, Comput Struct, 74, 277, 10.1016/j.compstruct.2005.04.012