Stress and deformation of multiple winding angle hybrid filament-wound thick cylinder under axial loading and internal and external pressure

Tsai, 1988, Composite design Shen, 1995, A filament-wound structure technology overview, Mater Chem Phys, 42, 96, 10.1016/0254-0584(95)01554-X Zheng, 2009, Mechanical analysis and reasonable design for Ti–Al alloy liner wound with carbon fiber resin composite high pressure vessel, J Zhejiang Univ Sci A, 10, 384, 10.1631/jzus.A0820025 Skinner, 2006, Trends, advances and innovations in filament winding, Reinforced Plast, 2, 28, 10.1016/S0034-3617(06)70912-2 Mertiny, 2004, An experimental investigation on the effect of multi-angle filament winding on the strength of tubular composite structures, Compos Sci Technol, 64, 1, 10.1016/S0266-3538(03)00198-2 Soden, 1993, Influence of winding angle on the strength and deformation of filament-wound composite tubes subjected to uniaxial and biaxial loads, Compos Sci Technol, 46, 363, 10.1016/0266-3538(93)90182-G Soden, 1978, The strength of a filament wound composite under biaxial loading, Composites, 9, 247, 10.1016/0010-4361(78)90177-5 Spencer, 1978, Effect of winding angle on the failure of filament wound pipe, Composites, 9, 263, 10.1016/0010-4361(78)90180-5 Soden, 1989, Experimental failure stresses for ±55 filament wound glass fiber reinforced plastic tubes under biaxial loads, Composites, 20, 125, 10.1016/0010-4361(89)90640-X Ellyin, 1997, The behavior of multidirectional filament wound fibre glass/epoxy tubulars under biaxial loading, Composites, 28A, 781, 10.1016/S1359-835X(97)00021-3 Antoniou, 2009, Mechanical behavior of glass/epoxy tubes under combined static loading. Part I: experimental, Compos Sci Technol, 69, 2241, 10.1016/j.compscitech.2009.06.009 Cohen, 1997, Influence of filament winding parameters on composite vessel quality and strength, Compos A, 28, 1035, 10.1016/S1359-835X(97)00073-0 Mertiny, 2004, Stacking sequence effect of multi-angle filament wound tubular composite structures, J Compos Mater, 38, 1095, 10.1177/0021998304042077 Roy, 1988, Design of thick composite cylinders, J Press Vessel Technol, 110, 255, 10.1115/1.3265597 Parnas, 2002, Design of fiber-reinforced composite pressure vessels under various loading conditions, Compos Struct, 58, 83, 10.1016/S0263-8223(02)00037-5 Xia, 2001, Analysis of multi-layered filament wound composite pipes under internal pressure, Compos Struct, 53, 483, 10.1016/S0263-8223(01)00061-7 Takayanagi, 2002, Stiffness and strength of filament wound fiber reinforced composite pipes under internal pressure, Adv Compos Mater, 11, 137, 10.1163/156855102760410333 Hull, 1978, Failure of glass/polyester filament wound pipe, Composites, 9, 17, 10.1016/0010-4361(78)90513-X Xia, 2000, Analysis of filament-wound sandwich pipe under internal pressure, Adv Compos Mater, 9, 223, 10.1163/15685510051033403 Hernandez-Moreno, 2008, Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure, Compos Sci Technol, 68, 1015, 10.1016/j.compscitech.2007.07.020 Rosenow, 1984, Wind angle effects in glass fiber-reinforced polyester filament wound pipes, Composites, 15, 144, 10.1016/0010-4361(84)90727-4 Mertiny, 2007, Quantification of leakage damage in high-pressure fibre-reinforced polymer composite tubular vessels, Polym Test, 26, 172, 10.1016/j.polymertesting.2006.09.009 Vedvik, 2008, Analysis of thick walled composite pipes with metal liner subjected to simultaneous matrix cracking and plastic flow, Compos Sci Technol, 68, 2705, 10.1016/j.compscitech.2008.04.032 Park, 2002, Analysis of filament wound composite structures considering the change of winding angles through the thickness direction, Compos Struct, 55, 63, 10.1016/S0263-8223(01)00137-4 Bakaiyan, 2009, Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations, Compos Struct, 88, 532, 10.1016/j.compstruct.2008.05.017 Ding, 1999, Exact solution for axisymmetric thick laminated shells, Compos Struct, 46, 125, 10.1016/S0263-8223(99)00047-1 Huang, 2001, Analysis of laminated circular cylinders of materials with the most general form of cylindrical anisotropy, Int J Solid Struct, 38, 6163, 10.1016/S0020-7683(00)00374-7 Goetschel, 1997, Analytical development of through-thickness properties of composite laminates, J Adv Mater, 29, 37 Xia, 2001, Analysis of filament-wound fiber-reinforced sandwich pipe under combined internal pressure and thermomechanical loading, Compos Struct, 51, 273, 10.1016/S0263-8223(00)00137-9