Thermomechanical analysis of composite plates curing process using ANSYS composite cure simulation

Safaei, 2019, Frequency-dependent forced vibration analysis of nanocomposite sandwich plate under thermo-mechanical loads, Compos. B Eng., 161, 44, 10.1016/j.compositesb.2018.10.049 Damadam, 2018, Bree's diagram of a functionally graded thick-walled cylinder under thermo-mechanical loading considering nonlinear kinematic hardening, Case Stud. Therm. Eng., 12, 644, 10.1016/j.csite.2018.08.004 Shahverdi Moghaddam, 2018, In-plane thermal characterization of fiberglass/phenolic honeycomb core through an experimental-numerical approach, 2551 Safaei, 2018, Effect of thermal gradient load on thermo-elastic vibrational behavior of sandwich plates reinforced by carbon nanotube agglomerations, Compos. Struct., 192, 28, 10.1016/j.compstruct.2018.02.022 Svanberg, 2002 Albert, 2002, Spring-in and warpage of angled composite laminates, Compos. Sci. Technol., 62, 1895, 10.1016/S0266-3538(02)00105-7 Zhang, 2009, Analysis on factors influencing process-induced deformation for thermoset composites, Acta Mater. Compos. Sin., 26, 179 Nelson, 1989, Prediction of dimensional changes in composite laminate during cure Bapanapalli, 2005, A linear finite element model to predict processing-induced distortion in FRP laminates, Compos. A Appl. Sci. Manuf., 36, 1666, 10.1016/j.compositesa.2005.03.018 Ding, 2019, A new analytical solution for cure-induced spring-in of L-shaped composite parts, Compos. Sci. Technol., 171, 1, 10.1016/j.compscitech.2018.12.004 Fernlund, 2010 Fernlund, 2002, Experimental and numerical study of the effect of cure cycle, tool surface, geometry and lay-up on the dimensional fidelity of autoclave-processed composite parts, Compos. Part A, 33, 341, 10.1016/S1359-835X(01)00123-3 Tavakol, 2011 Sprowitz, 2008, Thermal aspects for composite structures- from manufacturing to in-service predictions White, 1993, Cure cycle optimization for the reduction of processing-induced residual stresses in composite materials, J. Compos. Mater., 27, 1352, 10.1177/002199839302701402 Chen, 2019, Size sensitivity of residual stress and deformation in co-curing process of T-stiffened composite skin assembly, J. Reinf. Plast. Compos., 10.1177/0731684419858187 Patham, 2014, Multiscale modeling of residual stress development in continuous fiber-reinforced unidirectional thick thermoset composites, J. Compos., 2014, 10.1155/2014/172560 Sun, 2017, Modelling and experiment of process-induced distortions in unsymmetrical laminate plates, Compos. Struct., 182, 524, 10.1016/j.compstruct.2017.09.018 Khan, 2013, Determination of optimum cure parameters of 977–2A carbon/epoxy composites for quickstep processing, J. Appl. Polym. Sci., 129, 2638, 10.1002/app.38990 Kappel, 2016, Forced-interaction and spring-in – relevant initiators of process-induced distortions in composite manufacturing, Compos. Struct., 140, 217, 10.1016/j.compstruct.2016.01.016 Gigliotti, 2004, Internal stresses induced by cyclical hygrothermal conditions due to supersonic ight in laminated composite plates, AIAA J, 42, 10.2514/1.2405 Twigg, 2001, Tool-part interaction in composites processing Twigg, 2001, Measurement of tool-part interfacial stress during the processing of composite laminates, 85 Bogetti, 1991, Two-dimensional cure simulation of thick thermosetting composite, J. Compos. Mater., 25, 10.1177/002199839102500302 Hörberg, 2019, Thickness effect on spring-in of prepreg composite L-profiles–an experimental study, Compos. Struct., 209, 499, 10.1016/j.compstruct.2018.10.090 Introduction of LMAT's ACCS ANSYS Composite Cure Simulation Toolbox, ANSYS Southpointe 2600 ANSYS Drive Canonsburg, PA 15317, U.S.A., 2017. H. Patil, P. Jeyakarthikeyan, Mesh convergence study and estimation of discretization error of hub in clutch disc with integration of ANSYS, vol. 402, 2018, pp. 12–65. Hexcel 8552 AS4 Unidirectional RC Qualification Material Property Data Report, May 6, 2011. https://www.hexcel.com/Products/Resources. Khoun, 2009, Characterization methodology of thermoset resins for the processing of composite materials | case study: CYCOM 890 RTM Epoxy Resin, J. Compos. Mater., 44, 1397, 10.1177/0021998309353960 Garstka, 2017