Seismic design and performance of SPSWs with beam-connected web plates

Thorburn, 1983, Analysis of steel plate shear walls Roberts, 1992, Hysteretic characteristics of unstiffened perforated steel plate shear panels, Thin-Walled Struct., 14, 139, 10.1016/0263-8231(92)90047-Z Caccese, 1993, Experimental study of thin steel plate shear walls under cyclic load, J. Struct. Eng., 119, 573, 10.1061/(ASCE)0733-9445(1993)119:2(573) Elgaaly, 1998, Thin steel plate shear walls behavior and analysis, Thin-Walled Struct., 32, 151, 10.1016/S0263-8231(98)00031-7 Lubell, 2000, Unstiffened steel plate shear wall performance under cyclic loading, J. Struct. Eng., 126, 453, 10.1061/(ASCE)0733-9445(2000)126:4(453) Qu, 2009, Design of steel plate shear walls considering boundary frame moment resisting action, J. Struct. Eng., 135, 1511, 10.1061/(ASCE)ST.1943-541X.0000069 Formisano, 2007, Numerical analysis of slender steel shear panels for assessing design formulas, Int. J. Struct. Stab. Dyn., 7, 273, 10.1142/S0219455407002289 Basler, 1961, Strength of plate girders in shear AISC, 2010 Qu, 2008, Testing of full-scale two-story steel plate shear wall with reduced beam section connections and composite floors, J. Struct. Eng., 134, 364, 10.1061/(ASCE)0733-9445(2008)134:3(364) Purba, 2012, Case study on the impact of horizontal boundary elements design on seismic behavior of steel plate shear walls, J. Struct. Eng., 138, 645, 10.1061/(ASCE)ST.1943-541X.0000490 Berman, 2011, Seismic behavior of code designed steel plate shear walls, Eng. Struct., 33, 230, 10.1016/j.engstruct.2010.10.015 Gholipour, 2016, Behavior of multi-story code-designed steel plate shear wall structures regarding bay width, J. Constr. Steel Res., 122, 40, 10.1016/j.jcsr.2016.01.020 Berman, 2005, Experimental investigation of light-gauge steel plate shear walls, J. Struct. Eng., 131, 259, 10.1061/(ASCE)0733-9445(2005)131:2(259) Berman, 2003, Experimental investigation of light-gauge steel plate shear walls for the seismic retrofit of buildings Bhowmick, 2014, Seismic behavior of steel plate shear walls with centrally placed circular perforations, Thin-Walled Struct., 75, 30, 10.1016/j.tws.2013.09.027 Bruneau, 2002, Seismic retrofit of flexible steel frames using thin infill panels, Eng. Struct., 24, 443, 10.1016/S0141-0296(01)00111-0 Chen, 2011, Experimental study of low-yield-point steel plate shear wall under in-plane load, J. Constr. Steel Res., 67, 977, 10.1016/j.jcsr.2011.01.011 Moghimi, 2014, Column demands in steel plate shear walls with regular perforations using performance-based design methods, J. Constr. Steel Res., 103, 13, 10.1016/j.jcsr.2014.07.020 Vian, 2004, Testing of special LYS steel plate shear walls Vian, 2009, Special perforated steel plate shear walls with reduced beam section anchor beams. II: analysis and design recommendations, J. Struct. Eng., 135, 221, 10.1061/(ASCE)0733-9445(2009)135:3(221) Vian, 2009, Special perforated steel plate shear walls with reduced beam section anchor beams. I: experimental investigation, J. Struct. Eng., 135, 211, 10.1061/(ASCE)0733-9445(2009)135:3(211) Zirakian, 2015, Structural performance of unstiffened low yield point steel plate shear walls, J. Constr. Steel Res., 112, 40, 10.1016/j.jcsr.2015.04.023 De Matteis, 2005, Design of low-yield metal shear panels for energy dissipation, 665 Xue, 1994, Interaction of infilled steel shear wall panels with surrounding frame members, 339 Kulak, 1994, Discussion of “experimental study of thin steel plate shear walls under cyclic load” by Vincent Caccese, Mohamed Elgaaly, and Ruobo Chen (February, 1993, Vol. 119, No. 2), J. Struct. Eng., 120, 3072, 10.1061/(ASCE)0733-9445(1994)120:10(3072) Tromposch, 1987, Cyclic and static behavior of thin panel steel plate shear walls Vatansever, 2011, Experimental investigation of thin steel plate shear walls with different infill-to-boundary frame connections, Steel Compos. Struct., 11, 251, 10.12989/scs.2011.11.3.251 Xue, 1995 Purba, 2010 Moghimi, 2014, Beam design force demands in steel plate shear walls with simple boundary frame connections, J. Struct. Eng., 140, 10.1061/(ASCE)ST.1943-541X.0000993 Jahanpour, 2011, Evaluation of ultimate capacity of semi-supported steel shear walls, J. Constr. Steel Res., 67, 1022, 10.1016/j.jcsr.2011.01.007 Clayton, 2015, Seismic performance of self-centering steel plate shear walls with beam-only-connected web plates, J. Constr. Steel Res., 106, 198, 10.1016/j.jcsr.2014.12.017 Guo, 2011, Behavior of steel plate shear wall connected to frame beams only, Int. J. Steel Struct., 11, 467, 10.1007/s13296-011-4006-7 Ozcelik, 2017, Strip model for steel plate shear walls with beam-connected web plates, Eng. Struct., 136, 369, 10.1016/j.engstruct.2017.01.051 Choi, 2009, Steel plate shear walls with various infill plate designs, J. Struct. Eng., 135, 785, 10.1061/(ASCE)0733-9445(2009)135:7(785) ANSYS, 2016 Clayton, 2012, Seismic design and performance of self-centering steel plate shear walls, J. Struct. Eng., 138, 22, 10.1061/(ASCE)ST.1943-541X.0000421 Clayton, 2012, Experimental investigation of self-centering steel plate shear walls, J. Struct. Eng., 138, 952, 10.1061/(ASCE)ST.1943-541X.0000531 Dowden, 2016, Full-scale pseudodynamic testing of self-centering steel plate shear walls, J. Struct. Eng., 142 Berman, 2008, Capacity design of vertical boundary elements in steel plate shear walls, Eng. J. AISC, 45, 55 CAN/CSA, 2009 Timber, 1983, Experimental study of steel plate shear walls Sabelli, 2012 AISC, 2010 2000 ASCE, 2010 FEMA, 2009 Berman, 2003, Plastic analysis and design of steel plate shear walls, J. Struct. Eng., 129, 1448, 10.1061/(ASCE)0733-9445(2003)129:11(1448) Webster, 2014, Experimental investigation of SPSW web plate stress field development and vertical boundary element demand, J. Struct. Eng., 140, 10.1061/(ASCE)ST.1943-541X.0000989 Behbahanifard, 2004, Analysis of steel plate shear wall using explicit finite element method Driver, 1998, FE and simplified models of steel plate shear wall, J. Struct. Eng., 124, 121, 10.1061/(ASCE)0733-9445(1998)124:2(121) Shishkin, 2009, Analysis of steel plate shear walls using the modified strip model, J. Struct. Eng., 135, 1357, 10.1061/(ASCE)ST.1943-541X.0000066 Guo, 2012, Hysteretic analysis of steel plate shear walls (SPSWs) and a modified strip model for SPSWs, Adv. Struct. Eng., 15, 1751, 10.1260/1369-4332.15.10.1751 Webster, 2013 Clayton, 2015, Comparison of web plate numerical models for self-centering steel plate shear walls, Earthq. Eng. Struct. Dyn., 44, 2093, 10.1002/eqe.2578 Mazzoni, 2006 Shen, 1992, A two-surface model for steels with yield plateau, Jap. Soc. Civ. Eng. Struct. Eng. Earthq. Eng., 8, 179 Qu, 2014, Mitigation of inter-story drift concentration in multi-story steel concentrically braced frames through implementation of rocking cores, Eng. Struct., 70, 208, 10.1016/j.engstruct.2014.03.032 Uriz, 2008, Model for cyclic inelastic buckling of steel braces, J. Struct. Eng., 134, 619, 10.1061/(ASCE)0733-9445(2008)134:4(619) Ozcelik, 2016, Comparison of chevron and suspended-zipper braced steel frames, J. Constr. Steel Res., 119, 169, 10.1016/j.jcsr.2015.12.019 Somerville, 1997, Development of ground motion time histories for Phase 2 of the FEMA/SAC Steel Project Purba, 2015, Seismic performance of steel plate shear walls considering two different design philosophies of infill plates. II: assessment of collapse potential, J. Struct. Eng., 141 Clayton, 2012, Seismic design and performance of self-centering steel plate shear walls, J. Struct. Eng., 138, 22, 10.1061/(ASCE)ST.1943-541X.0000421 Chao, 2007, A seismic design lateral force distribution based on inelastic state of structures, Earthquake Spectra, 23, 547, 10.1193/1.2753549 Newell, 2008, Cyclic behavior of steel wide-flange columns subjected to large drift, J. Struct. Eng., 134, 1334, 10.1061/(ASCE)0733-9445(2008)134:8(1334) Astaneh-Asl, 2005, Design of shear tab connections for gravity and seismic loads Astaneh-Asl, 2005, Notes on design of double-angle and tee shear connections for gravity and seismic loads