Risk-Based Optimization of Rail Defect Inspection Frequency for Petroleum Crude Oil Transportation

Transportation Research Record - Tập 2545 Số 1 - Trang 27-35 - 2016
Xiang Liu1, C. Tyler Dick2
1Department of Civil and Environmental Engineering, Rutgers University, CoRE 606, 96 Frelinghuysen Road, Piscataway, NJ 08854
2Rail Transportation and Engineering Center, University of Illinois at Urbana–Champaign, 1241 Newmark Civil Engineering Laboratory, MC-250, 205 North Mathews Avenue, Urbana, IL 61801

Tóm tắt

The rapid expansion of production of North American petroleum crude oil from shale has led to a significant increase in rail transport of crude oil. Broken rails are frequent causes of train accidents. Ultrasonic rail defect inspection is widely used to prevent train accidents caused by broken rails, thereby reducing the hazardous materials transportation risk. This paper describes a new methodology to estimate unit-train crude oil transportation risk by the frequency of location-specific rail defect inspection. The risk model was used to develop a Pareto optimization model that determines the frequency of segment-specific rail defect inspection to reduce the total-route risk in a cost-effective manner. A numerical case study was developed to illustrate the application of the risk analysis and optimization models. This research is intended to provide new methods and information to assist the railroad industry in optimizing investment in infrastructure improvement, thereby mitigating the risk of rail transport of crude oil and other hazardous materials.

Từ khóa


Tài liệu tham khảo

Barkan C. P. L., 2015, TR News, 41

Association of American Railroads. Moving Crude Oil Safely by Rail. July 2015. https://www.aar.org/BackgroundPapers/Moving%20Crude%20Oil%20Safely%20by%20Rail.pdf.

10.3141/2374-12

10.1016/j.jhazmat.2013.04.052

Federal Railroad Administration, 2011, Guide for Preparing Accident/Incident Reports

10.3141/1825-09

10.3141/1825-07

10.3141/2261-21

10.1115/RTDF2013-4711

10.1016/j.aap.2013.04.039

10.1016/j.jhazmat.2014.05.029

10.1061/(ASCE)TE.1943-5436.0000697

Zarembski A., 2005, Proc. AREMA (American Railway Engineering and Maintenance-of-Way Association) Annual Conference

10.1016/j.ijpe.2006.03.008

Schafer D., 2008, Salt Lake City

Orringer O., 1988, Crack Propagation Life of Detail Fractures in Rails

OrringerO. Control of Rail Integrity by Self-Adaptive Scheduling of Rail Tests. Federal Railroad Administration Report No. DOT/FRA/ORD-90/05. U.S. Department of Transportation, 1990.

Palese J., 2000, Proc. AREMA (American Railway Engineering and Maintenance-of-Way Association) Annual Conference

Barkan C. P. L., 1991, Transportation Research Record 1313, 33

10.3141/1707-04

10.1016/j.cor.2005.06.002

10.1016/j.jhazmat.2008.01.120

10.1016/j.jhazmat.2011.01.136

10.1016/0001-4575(83)90012-X

10.3141/2043-08

10.3141/2159-08

10.1002/9780470924860

10.1016/j.aap.2010.09.008

10.1016/j.tre.2012.02.004

10.1111/risa.12063

10.3141/2289-20

10.1111/j.1467-8667.2008.00584.x

10.3141/2261-14

Nayak P. R., 1983, Event Probabilities and Impact Zones for Hazardous Materials Accidents on Railroads

10.3141/1863-12

10.3141/1995-10

Liu X., 2014, Presented at 93rd Annual Meeting of the Transportation Research Board

10.1287/mnsc.30.4.503

10.1016/S0377-2217(99)00220-9

U.S. Department of Transportation, Pipeline and Hazardous Materials Administration. Hazardous Materials: Enhanced Tank Car Standards and Operational Controls for High-Hazard Flammable Trains (Final Rule). http://www.fra.dot.gov/eLib/Details/L16354. Accessed May 7, 2015.

TreichelT. Tank Car Accident Safety Research for Crude Oil and Ethanol Cars. Presented at National Transportation Safety Board Rail Safety Forum on Transport of Crude Oil and Ethanol, Washington, D.C., April 22–23, 2014. http://www.ntsb.gov/news/events/Documents/Panel%201_C_Todd%20Treichel.pdf.

10.1287/opre.46.5.625

10.1287/trsc.34.2.165.12303

10.1016/j.cor.2005.06.013

Pipeline and Hazardous Materials Safety Administration U.S. Department of Transportation. Emergency Response Guidebook, 2012. http://www.phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/Hazmat/ERG2012.pdf.

Jenks G. F., 1967, International Yearbook of Cartography Volume 7, 186

JeongD. Y. Analytical Modeling of Rail Defects and Its Applications to Rail Defect Management. UIC/WEC Joint Research Project on Rail Defect Management, 2003. http://ntl.bts.gov/lib/35000/35200/35258/uic-jrp3.pdf.

Jeong D. Y., Proc. of ASME (American Society of Mechanical Engineers) Joint Rail Conference

10.1016/j.aap.2015.08.004