Intensification of heat transfer in catalytic reactors by additively manufactured periodic open cellular structures (POCS)

Peng, 2004, Properties of ceramic foam catalyst supports: one-dimensional and two-dimensional heat transfer correlations, Appl. Catal. A: Gen., 266, 235, 10.1016/j.apcata.2004.02.012 Eigenberger, 2000 Tsotsas, 2013, 1517 Tronconi, 2014, Structured catalysts for non-adiabatic applications, Curr. Opin. Chem. Eng., 5, 55, 10.1016/j.coche.2014.04.003 Montebelli, 2013, Enabling small-scale methanol synthesis reactors through the adoption of highly conductive structured catalysts, Catal. Today, 215, 176, 10.1016/j.cattod.2013.02.020 Bianchi, 2012, An appraisal of the heat transfer properties of metallic open-cell foams for strongly exo-/endo-thermic catalytic processes in tubular reactors, Chem. Eng. J., 198–199, 512, 10.1016/j.cej.2012.05.045 Boomsma, 2003, Metal foams as compact high performance heat exchangers, Mech. Mater., 35, 1161, 10.1016/j.mechmat.2003.02.001 Groppi, 2005, Honeycomb supports with high thermal conductivity for gas/solid chemical processes, Catal. Today, 105, 297, 10.1016/j.cattod.2005.06.041 Reitzmann, 2006, Keramische Schwämme –Anwendungspotenzial monolithischer Netzstrukturen als katalytische Packungen, Chem. Ing. Tech., 78, 885, 10.1002/cite.200600029 Zhao, 2012, Review on thermal transport in high porosity cellular metal foams with open cells, Int. J. Heat Mass Transf., 55, 3618, 10.1016/j.ijheatmasstransfer.2012.03.017 Grosse, 2009, Morphological characterization of ceramic sponges for applications in chemical engineering, Ind. Eng. Chem. Res., 48, 10395, 10.1021/ie900651c Inayat, 2011, Determining the specific surface area of ceramic foams: the tetrakaidecahedra model revisited, Chem. Eng. Sci., 66, 1179, 10.1016/j.ces.2010.12.031 Inayat, 2016, Development of a new pressure drop correlation for open-cell foams based completely on theoretical grounds: taking into account strut shape and geometric tortuosity, Chem. Eng. J., 287, 704, 10.1016/j.cej.2015.11.050 Dietrich, 2010, Determination of the thermal properties of ceramic sponges, Int. J. Heat Mass Transf., 53, 198, 10.1016/j.ijheatmasstransfer.2009.09.041 Inayat, 2011, Periodic open-cell foams: pressure drop measurements and modeling of an ideal tetrakaidecahedra packing, Chem. Eng. Sci., 66, 2758, 10.1016/j.ces.2011.03.031 Klumpp, 2014, Periodic open cellular structures with ideal cubic cell geometry: effect of porosity and cell orientation on pressure drop behavior, Chem. Eng. J., 242, 364, 10.1016/j.cej.2013.12.060 Heinl, 2007, Cellular titanium by selective electron beam melting, Adv. Eng. Mater., 9, 360, 10.1002/adem.200700025 Schwieger, 2016, Hierarchy concepts: classification and preparation strategies for zeolite containing materials with hierarchical porosity, Chem. Soc. Rev., 45, 3353, 10.1039/C5CS00599J Von Scala, 1999, Heat transfer measurements and simulation of KATAPAK-M(®) catalyst supports, Chem. Eng. Sci., 54, 1375, 10.1016/S0009-2509(99)00077-9 Schildhauer, 2009, Closed cross flow structures—improving the heat transfer in fixed bed reactors by enforcing radial convection, Chem. Eng. Proc.: Process Intensif., 48, 321, 10.1016/j.cep.2008.04.009 Pangarkar, 2010, Heat transport in structured packings with co-current downflow of gas and liquid, Chem. Eng. Sci., 65, 420, 10.1016/j.ces.2009.08.018 Kołodziej, 2001, Alternative solution for strongly exothermal catalytic reactions: a new metal-structured catalyst carrier, Catal. Today, 69, 115, 10.1016/S0920-5861(01)00361-3 Ranut, 2016, On the effective thermal conductivity of aluminum metal foams: review and improvement of the available empirical and analytical models, Appl. Therm. Eng., 101, 496, 10.1016/j.applthermaleng.2015.09.094 Giani, 2005, Heat transfer characterization of metallic foams, Ind. Eng. Chem. Res., 44, 9078, 10.1021/ie050598p Lacroix, 2007, Pressure drop measurements and modeling on SiC foams, Chem. Eng. Sci., 62, 3259, 10.1016/j.ces.2007.03.027 Lu, 1998, Heat transfer in open-cell metal foams, Acta Mater., 46, 3619, 10.1016/S1359-6454(98)00031-7 Tsotsas, 2013, 629 Fischedick, 2017, Radial two-phase thermal conductivity of ceramic sponges up to high temperatures –experimental results and correlation, Int. J. Therm. Sci., 114, 98, 10.1016/j.ijthermalsci.2016.11.020 Dietrich, 2014, Optical parameters for characterization of thermal radiation in ceramic sponges –experimental results and correlation, Int. J. Heat Mass Transf., 79, 655, 10.1016/j.ijheatmasstransfer.2014.08.023 Lemlich, 1978, A theory for the limiting conductivity of polyhedral foam at low density, J. Colloid Interface Sci., 64, 107, 10.1016/0021-9797(78)90339-9 Yang, 2013, A simplistic analytical unit cell based model for the effective thermal conductivity of high porosity open-cell metal foams, J. Phys. D: Appl. Phys., 46, 255302, 10.1088/0022-3727/46/25/255302 Bianchi, 2015, Assessment of periodic open cellular structures for enhanced heat conduction in catalytic fixed-Bed reactors, Adv. Eng. Mater., 608 Calmidi, 1999, The effective thermal conductivity of high porosity fibrous metal foams, J. Heat Transf., 121, 466, 10.1115/1.2826001 Bhattacharya, 2002, Thermophysical properties of high porosity metal foams, Int. J. Heat Mass Transf., 45, 1017, 10.1016/S0017-9310(01)00220-4 Dul'nev, 1979, Conductivity of nonuniform systems, J. Eng. Phys., 36, 601, 10.1007/BF00864139 Paek, 2000, Effective thermal conductivity and permeability of aluminum foam materials1, Int. J. Thermophys., 21, 453, 10.1023/A:1006643815323 Yu, 2005, A unit cube-based model for heat transfer and fluid flow in porous carbon foam, J. Heat Transf., 128, 352, 10.1115/1.2165203 Edouard, 2011, The effective thermal conductivity for slim and fat foams, AIChE J., 57, 1646, 10.1002/aic.12372 Boomsma, 2001, On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam, Int. J. Heat Mass Transf., 44, 827, 10.1016/S0017-9310(00)00123-X Kumar, 2014, The geometric and thermohydraulic characterization of ceramic foams: an analytical approach, Acta Mater., 75, 273, 10.1016/j.actamat.2014.04.061 Wallenstein, 2014, Radial two-phase thermal conductivity and wall heat transfer coefficient of ceramic sponges –experimental results and correlation, Int. J. Heat Mass Transf., 79, 486, 10.1016/j.ijheatmasstransfer.2014.08.003 Calmidi, 2000, Forced convection in high porosity metal foams, J. Heat Transf., 122, 557, 10.1115/1.1287793 Dietrich, 2011, Axial two-phase thermal conductivity of ceramic sponges −Experimental results and correlation, Int. J. Heat Mass Transf., 54, 2276, 10.1016/j.ijheatmasstransfer.2011.02.037 Edouard, 2010, The effective thermal properties of solid foam beds: experimental and estimated temperature profiles, Int. J. Heat Mass Transf., 53, 3807, 10.1016/j.ijheatmasstransfer.2010.04.033 Gräf, 2016, Heat transport in catalytic sponge packings in the presence of an exothermal reaction: characterization by 2D modeling of experiments, Chem. Eng. J., 287, 425, 10.1016/j.cej.2015.11.042 Tronconi, 2004, Monolithic catalysts with ‘high conductivity’ honeycomb supports for gas/solid exothermic reactions: characterization of the heat-transfer properties, Chem. Eng. Sci., 59, 4941, 10.1016/j.ces.2004.07.018 Bianchi, 2013, Heat transfer properties of metal foam supports for structured catalysts: wall heat transfer coefficient, Catal. Today, 216, 121, 10.1016/j.cattod.2013.06.019 Razza, 2016, Heat transfer performance of structured catalytic reactors packed with metal foam supports: influence of wall coupling, Catal. Today, 273, 187, 10.1016/j.cattod.2016.02.058 Boger, 2005, Heat transfer in conductive monolith structures, Chem. Eng. Sci., 60, 1823, 10.1016/j.ces.2004.11.031 Bianchi, 2015, Numerical simulation of heat transfer in the near-wall region of tubular reactors packed with metal open-cell foams, Chem. Eng. J., 264, 268, 10.1016/j.cej.2014.11.055 Do, 2017, Electrophoretic deposition of boehmite on additively manufactured, interpenetrating periodic open cellular structures for catalytic applications, Ind. Eng. Chem. Res., 56, 13402, 10.1021/acs.iecr.7b02453 Wormser, 2017, Design and additive manufacturing of 3D phononic band gap structures based on gradient based optimization, Materials, 10, 1125, 10.3390/ma10101125 Tang, 2017, Lattice structure design and optimization with additive manufacturing constraints Luo, 2017, Finite-element design and optimization of a three-dimensional tetrahedral porous titanium scaffold for the reconstruction of mandibular defects, Med. Eng. Phys., 47, 176, 10.1016/j.medengphy.2017.06.015 Grosse, 2009, Morphological characterization of ceramic sponges for applications in chemical engineering, Ind. Eng. Chem. Res., 48, 10395, 10.1021/ie900651c Wakao, 1982 Dixon, 1996, An improved equation for the overall heat transfer coefficient in packed beds, Chem. Eng. Process.: Process Intensif., 35, 323, 10.1016/0255-2701(96)80012-2 Aboulkhair, 2014, Reducing porosity in AlSi10Mg parts processed by selective laser melting, Addit. Manuf., 1–4, 77, 10.1016/j.addma.2014.08.001 Pyka, 2013, Surface roughness and morphology customization of additive manufactured open porous Ti6Al4V structures, Materials, 6, 4737, 10.3390/ma6104737 Peters, 2015, Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting, Energy Environ. Sci., 8, 641, 10.1039/C4EE03461A Horneber, 2014, Numerical simulations of fluid dynamics in carrier structures for catalysis: characterization and need for optimization, Chem. Eng. Sci., 117, 229, 10.1016/j.ces.2014.06.036 Lämmermann, 2016, Experimental investigation of gas-liquid distribution in periodic open cellular structures as potential catalyst supports, Catal. Today, 273, 161, 10.1016/j.cattod.2016.02.049 Martin, 1993, Radiale Wärmeleitung in durchströmten Schüttungsrohren, Chem. Ing. Tech., 65, 1468, 10.1002/cite.330651206