Influence of thermal and mechanical surface modifications induced by laser shock processing on the initiation of corrosion pits in 316L stainless steel
Tóm tắt
Pure mechanical and thermo-mechanical laser shock processing treatments have been carried out on an AISI 316L stainless steel. Surface properties, mostly mechanical and metallurgical modifications, were analysed at different scales: a local scale using the nano-indentation technique and AFM analysis, and a more macroscopic scale, using microhardness, optical microscopy and residual stress determinations. After a pure mechanical laser-peening treatment, a significant improvement in the pitting corrosion resistance (+0.1 V) was observed in 0.05 M NaCl. This improvement was attributed to the combined effects of compressive residual stresses and work-hardening, and, in turn, to a mechano-electrochemical phenomenon by which a modification of cathodic reactions occurs during electrochemical tests. For the surface treated by thermo-mechanical laser peening (combination of a surface ablation and shock waves), a tendency for decreasing resistance against pitting corrosion was shown, and attributed to the processing-specific surface texture (ablation craters), which made the material susceptible for the creation of occluded cells.
Tài liệu tham khảo
Pan Q, Hang W, Song R, Zhou Y, Zhang G (1998) Surface Coating Technol 102:245
Kwok C, Man H, Cheng F (1998) Surface Coating Technol 99:295
Clauer AH (1981) In: Shock waves and high strain rate phenomena in metals. Plenum Press, New York, p 675
Obata M, Kubo T, Sano Y (2000) Zairyo 49(2):193
Peyre P, Scherpereel X, Berthe L, Carboni C, Fabbro R, Beranger G, Lemaitre C (2000) Mater Sci Eng 280(2):294
Krauβ M, Herzog R, Scholtes B (2001) Z Metallkd 92(8):910
Braham C, Perrais J, Ledion J (1994) 2ème Colloque Européen “Corrosion Dans Les Usines Chimiques Et Parachimiques’’. 206ème Manifestation Fec, Grenoble (Fr)
Ben Rhouma A, Braham C, Fitzpatrick ME (2001) J Mater Eng Perf 10:507
Ke R, Alkire R (1995) J Electrochem Soc 142(12):4056
Carboni C (2002) Doctoral Thesis, University of Technology of Compiègne, Fr
Carboni C, Peyre P, Fregonese M, Mazille H (2001) In: Jeandin M, Sudarshan T (eds) Proceedings of surface modifications technologies XIV (Smt14), Paris, Sept. 2000. ASM, p 381
Fabbro R, Fournier J, Ballard P, Devaux D, Virmont J (1990) J Appl Phys 68:775
Schmidt-Uhlig T (2000) Epj Appl Phys 9(3):235
Seo M, Chiba M (2001) Electrochim Acta 47:319
Lu J (2005) In: Lu J (ed) Handbook on residual stress measurements, 2nd edn. SEM
Gutman EM (1994) Mechanochemistry of solid surfaces, Ed. World Scientific Publishers, Singapore
Vignal V, Valot C, Oltra R, Verneau M, Coudreuse L (2002) Corros Sci 44(7):1477
Kamachi Mudali U, Katada Y (2001) Electrochim Acta 46:3735