Surface modifications of Ti alloy with tunable hierarchical structures and chemistry for improved metal–polymer interface used in deepwater composite riser

Ochoa, 2005, Offshore composites: transition barriers to an enabling technology, Compos. Sci. Technol., 65, 2588, 10.1016/j.compscitech.2005.05.019

Wang, 2011, Tailoring of composite reinforcements for weight reduction of offshore production risers, Appl. Mech. Mater., 66-68, 1416, 10.4028/www.scientific.net/AMM.66-68.1416

Silva, 2013, Optimization of composite catenary risers, Mar. Struct., 33, 1, 10.1016/j.marstruc.2013.04.002

Vogelesang, 2000, Development of fibre metal laminates for advanced aerospace structures, J. Mater. Process. Technol., 103, 1, 10.1016/S0924-0136(00)00411-8

Reyes V, 2000, The mechanical properties of fibre-metal laminates based on glass fibre reinforced polypropylene, Compos. Sci. Technol., 60, 1085, 10.1016/S0266-3538(00)00002-6

Johnson, 2008, Crack growth behavior of internal titanium plies of a fiber metal laminate, Compos. Part A: Appl. Sci. Manuf., 39, 1705, 10.1016/j.compositesa.2008.07.017

Cortés, 2006, The prediction of tensile failure in titanium-based thermoplastic fibre-metal laminates, Compos. Sci. Technol., 66, 2306, 10.1016/j.compscitech.2005.11.031

Lakstein, 2009, Enhanced osseointegration of grit-blasted, NaOH-treated and electrochemically hydroxyapatite-coated Ti-6Al-4V implants in rabbits, Acta Biomater., 5, 2258, 10.1016/j.actbio.2009.01.033

Kim, 2010, Surface modification of Ti dental implants by grit-blasting and micro-arc oxidation, Mater. Manuf. Process., 25, 307, 10.1080/10426911003747915

Coelho, 2009, Physico/chemical characterization and in vivo evaluation of nanothickness bioceramic depositions on alumina-blasted/acid-etched Ti-6Al-4V implant surfaces, J. Biomed. Mater. Res. - Part A, 90, 351, 10.1002/jbm.a.32097

Yang, 2008, Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening, J. Mater. Process. Technol., 201, 303, 10.1016/j.jmatprotec.2007.11.147

Aladjem, 1973, Anodic oxidation of titanium and its alloys, J. Mater. Sci., 8, 688, 10.1007/BF00561225

Gemelli, 2011, Low voltage anodization of titanium in nitric acid solution: a new method to bioactivate titanium, Mater. Charact., 62, 938, 10.1016/j.matchar.2011.07.004

He, 2004, Effects of anodization voltage on CaP/Al2O3-Ti nanometre biocomposites, Nanotechnology, 15, 1465, 10.1088/0957-4484/15/11/015

Matykina, 2011, Comparative determination of TiO2 surface free energies for adhesive bonding application, Int. J. Adhes. Adhes., 31, 832, 10.1016/j.ijadhadh.2011.08.003

Matz, 1988, Optimization of the durability of structural titanium adhesive joints, Int. J. Adhes. Adhes., 8, 17, 10.1016/0143-7496(88)90053-X

Mertens, 2012, Investigation of surface pre-treatments for the structural bonding of titanium, Int. J. Adhes. Adhes., 34, 46, 10.1016/j.ijadhadh.2011.12.007

Xiong, 2011, Interfacial chemistry and adhesion between titanium dioxide nanotube layers and titanium substrates, J. Phys. Chem. C, 115, 4768, 10.1021/jp111651d

Dagostino, 1992, Plasma-etching of Ti in fluorine-containing feeds, J. Appl. Phys., 71, 462, 10.1063/1.350679

Man, 2005, Surface morphology of a laser surface nitrided and etched Ti-6Al-4V alloy, Surf. Coat. Technol., 192, 341, 10.1016/j.surfcoat.2004.07.076

Wang, 2004, Growth, microstructure and mechanical properties of microarc oxidation coatings on titanium alloy in phosphate-containing solution, Appl. Surf. Sci., 233, 258, 10.1016/j.apsusc.2004.03.231

Wang, 2005, Effect of discharge pulsating on microarc oxidation coatings formed on Ti6Al4V alloy, Mater. Chem. Phys., 90, 128, 10.1016/j.matchemphys.2004.10.025

Weng, 1999, Preparation and characterization of hydroxyapatite coatings on Ti6Al4V alloy by a sol–gel method, J. Am. Ceram. Soc., 82, 27, 10.1111/j.1151-2916.1999.tb01719.x

Yu, 2007, Amorphous sol–gel SiO2 film for protection of Ti6Al4V alloy against high temperature oxidation, Surf. Coat. Technol., 201, 5967, 10.1016/j.surfcoat.2006.11.004

Carradó, 2010, Structural, microstructural, and residual stress investigations of plasma-sprayed hydroxyapatite on Ti-6Al-4V, ACS Appl. Mater. Interfaces, 2, 561, 10.1021/am900763j

Roy, 2012, MgO-doped tantalum coating on Ti: microstructural study and biocompatibility evaluation, ACS Appl. Mater. Interfaces, 4, 577, 10.1021/am201365e

Souto, 2004, Electrochemical behavior of different preparations of plasma-sprayed hydroxyapatite coatings on Ti6Al4V substrate, J. Biomed. Mater. Res. A, 70A, 59, 10.1002/jbm.a.30061

Park, 2000, Polyimide-silica hybrids containing novel phenylethynyl imide silanes as coupling agents for surface-treated titanium alloy, Int. J. Adhes. Adhes., 20, 457, 10.1016/S0143-7496(00)00017-8

Yao, 2011, Effects of 3,4-dihydrophenyl groups in water-soluble phospholipid polymer on stable surface modification of titanium alloy, Colloids Surf. B: Biointerfaces, 88, 215, 10.1016/j.colsurfb.2011.06.034

He, 2013, Surface microstructures and epoxy bonded shear strength of Ti6Al4V alloy anodized at various temperatures, Compos. Sci. Technol., 82, 15, 10.1016/j.compscitech.2013.04.007

He, 2015, Effects of primer and annealing treatments on the shear strength between anodized Ti6Al4V and epoxy, Int. J. Adhes. Adhes., 57, 49, 10.1016/j.ijadhadh.2014.10.004

Su, 2008, Formation mechanism of porous anodic aluminium and titanium oxides, Adv. Mater., 20, 3663, 10.1002/adma.200800845

Xiong, 2011, Interfacial chemistry and adhesion between titanium dioxide nanotube layers and titanium substrates, J. Phys. Chem. C, 115, 4768, 10.1021/jp111651d

Milošev, 2000, Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy, Biomaterials, 21, 2103, 10.1016/S0142-9612(00)00145-9

Bico, 2002, Wetting of textured surfaces, Colloids Surf. A: Physicochem. Eng. Aspects, 206, 41, 10.1016/S0927-7757(02)00061-4

Bentadjine, 2001, Organo-metallic complex characterization formed when liquid epoxy-diamine mixtures are applied onto metallic substrates, Polymer, 42, 6271, 10.1016/S0032-3861(01)00034-9

Aufray, 2008, Is gold always chemically passive?, Appl. Surf. Sci., 254, 1936, 10.1016/j.apsusc.2007.07.192

Roche, 2002, Formation of epoxy-diamine/metal interphases, Int. J. Adhes. Adhes., 22, 431, 10.1016/S0143-7496(02)00021-0

Meiser, 2010, Electron microscopic studies on the diffusion of metal ions in epoxy-metal interphases, Int. J. Adhes. Adhes., 30, 170, 10.1016/j.ijadhadh.2009.12.001

Gallardo, 2006, Spontaneous attachment of amines to carbon and metallic surfaces, J. Phys. Chem. B, 110, 19521, 10.1021/jp063368c