Performance monitoring and modeling of an uncovered photovoltaic-thermal (PVT) water collector

Solar Energy - Tập 135 - Trang 551-568 - 2016
Niccolò Aste1, Claudio Del Pero1, Fabrizio Leonforte1, Massimiliano Manfren1
1Architecture, Built Environment and Construction Engineering A.B.C., Politecnico di Milano, Via Bonardi 9, 20133 Milano, Italy

Tài liệu tham khảo

Aste, 2006, Simulation model for forecast of the energy performance of PV plants, 14 Aste, 2013, Simulation and model validation of uncovered PVT solar system Aste, 2014, Water flat plate PV–thermal collectors: a review, Sol. Energy, 102, 98, 10.1016/j.solener.2014.01.025 Aste, 2015, Design, modeling and performance monitoring of a photovoltaic–thermal (PVT) water collector, Sol. Energy, 112, 85, 10.1016/j.solener.2014.11.025 Aste, 2008, Design, development and performance monitoring of a photovoltaic-thermal (PVT) air collector, Renew. Energy, 33, 914, 10.1016/j.renene.2007.06.022 Aste, 2012, Thermal-electrical optimization of the configuration a liquid PVT collector, Energy Procedia, 30, 1, 10.1016/j.egypro.2012.11.002 Bakker, 2005, Performance and costs of a roof-sized PV/thermal array combined with a ground coupled heat pump, Sol. Energy, 78, 331, 10.1016/j.solener.2004.09.019 Chen, 2010, Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept, Sol. Energy, 84, 1892, 10.1016/j.solener.2010.06.013 Chow, 2006, Hybrid photovoltaic-thermosyphon water heating system for residential application, Sol. Energy, 80, 298, 10.1016/j.solener.2005.02.003 Chow, 2010, A review on photovoltaic/thermal hybrid solar technology, Appl. Energy, 87, 365, 10.1016/j.apenergy.2009.06.037 Chow, 2009, Energy and exergy analysis of photovoltaic-thermal collector with and without glass cover, Appl. Energy, 86, 310, 10.1016/j.apenergy.2008.04.016 Coleman, 2009 Dodson, 2014 Dupeyrat, 2011, Efficient single glazed flat plate photovoltaic-thermal hybrid collector for domestic hot water system, Sol. Energy, 85, 1457, 10.1016/j.solener.2011.04.002 Duffie, 1974 Gang, 2012, Performance study and parametric analysis of a novel heat pipe PV/T system, Energy, 37, 384, 10.1016/j.energy.2011.11.017 Evola, 2014, Exergy and thermoeconomic optimization of a water-cooled glazed hybrid photovoltaic/thermal (PVT) collector, Sol. Energy, 107, 12, 10.1016/j.solener.2014.05.041 Fraisse, 2007, Energy performance of water hybrid PV/T collectors applied to combisystems of direct solar floor type, Sol. Energy, 81, 1426, 10.1016/j.solener.2006.11.017 Goos, 2011 Hermann, M., 2011. Develop of a Bionic solar collector with aluminium roll-bond absorber. Final Report, Seventh framework programme. Ibrahim, 2011, Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors, Renew. Sustain. Energy Rev., 15, 352, 10.1016/j.rser.2010.09.024 Ievers, 2009, Numerical simulation of three-dimensional flow dynamics in a hot water storage tank, Appl. Energy, 86, 2604, 10.1016/j.apenergy.2009.04.010 King, D.L., Kratochvil, J.A., Boyson, W.E., 2004. Photovoltaic Array Performance Model. Sandia Report. Klein, 2000 Hecktheuer, 2001, The effects on the photovoltaic system response of reflection, spectrum, voltage drop and temperature Lambarski, T.J., 1984. Electrical design guidelines for photovoltaic/thermal systems. In: Conf. Rec. IEEE Photovoltaic Spec. Conf.; (United States) (No. CONF-840561-), pp. 1045–1050. Oberkampf, 2010 Osterwald, 2014, Photovoltaic module calibration value versus optical air mass: the air mass function, Prog. Photovoltaics Res. Appl., 22, 560, 10.1002/pip.2303 Pathak, 2014, Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems, Appl. Energy, 120, 115, 10.1016/j.apenergy.2014.01.041 Pieper, 2011, A simple and accurate numerical network flow model for bionic micro heat exchangers, Heat Mass Transfer, 47, 491, 10.1007/s00231-010-0739-7 Reich, 2009, Crystalline silicon cell performance at low light intensities, Sol. Energy Mater. Sol. Cells, 93, 1471, 10.1016/j.solmat.2009.03.018 Rosa-Clot, 2011, TESPI: thermal electric solar panel integration, Sol. Energy, 85, 2433, 10.1016/j.solener.2011.07.003 Roy, 2011, A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing, Comput. Methods Appl. Mech. Eng., 200, 10.1016/j.cma.2011.03.016 Tiwari, 2006, Performance evaluation of solar PV/T system: an experimental validation, Sol. Energy, 80, 751, 10.1016/j.solener.2005.07.006 Unsworth, 1975, Long-wave radiation at the ground I. Angular distribution of incoming radiation, Quart. J. Roy. Meteorol. Soc., 101, 13, 10.1002/qj.49710143029 Vokas, 2006, Hybrid photovoltaic–thermal systems for domestic heating and cooling—A theoretical approach, Sol. Energy, 80, 607, 10.1016/j.solener.2005.03.011 Watmuff, 1977, Solar and wind induced external coefficients – solar collectors, Cooperation Mediterraneenne pour l’Energie Solaire Zondag, 2003, The yield of different combined PV-thermal collector designs, Sol. Energy, 74, 253, 10.1016/S0038-092X(03)00121-X