Effect of different silica particles on flowability of gypsum powder for 3D powder printing
Tóm tắt
Từ khóa
Tài liệu tham khảo
Feng, 2015, Mechanical properties of structures 3D printed with cementitious powders, Constr. Build. Mater., 93, 486, 10.1016/j.conbuildmat.2015.05.132
Shakor, 2017, Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing, Constr. Build. Mater., 138, 398, 10.1016/j.conbuildmat.2017.02.037
Sachs E M, Haggerty J S, Cima M J, et al. Three-dimensional printing techniques: U.S. Patent 5,204,055. 1993-4-20.
Castilho, 2015, Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing, Biofabrication, 7, 10.1088/1758-5090/7/1/015004
Jariwala, 2015, 3d printing of personalized artificial bone scaffolds, 3D Print. Add. Manuf., 2, 56, 10.1089/3dp.2015.0001
Snyder, 2014, 3D systems' technology overview and new applications in manufacturing, engineering, science, and education, 3D Print. Add. Manuf., 1, 169, 10.1089/3dp.2014.1502
Utela, 2008, A review of process development steps for new material systems in three dimensional printing (3DP), J. Manuf. Processes, 10, 96, 10.1016/j.jmapro.2009.03.002
Suwanprateeb, 2006, Three-dimensional printing of porous polyethylene structure using water-based binders, J. Biomed. Mater. Res. B Appl. Biomater., 78, 138, 10.1002/jbm.b.30469
Moon, 2002, Ink-jet printing of binders for ceramic components, J. Am. Ceram. Soc., 85, 755, 10.1111/j.1151-2916.2002.tb00168.x
Dreßler, 2010, Temperature distribution in powder beds during 3D printing, Rapid Prototyping J., 16, 328, 10.1108/13552541011065722
Gbureck, 2007, Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing, Adv. Funct. Mater., 17, 3940, 10.1002/adfm.200700019
Gbureck, 2007, Direct printing of bioceramic implants with spatially localized angiogenic factors, Adv. Mater., 19, 795, 10.1002/adma.200601370
Vorndran, 2008, 3D powder printing of β-tricalcium phosphate ceramics using different strategies, Adv. Eng. Mater., 10, B67, 10.1002/adem.200800179
Mróz, 2017, Hydration kinetics of calcium sulphate hemihydrate modified by water-soluble polymers, Int. J. Eng. Res. Sci, 3, 5, 10.25125/engineering-journal-IJOER-MAY-2017-25
Bobby, 2014, Influence of moisture in the gypsum moulds made by 3D printing, Proc. Eng., 97, 1618, 10.1016/j.proeng.2014.12.312
Polzin, 2013, Characterization and evaluation of a PMMA-based 3D printing process, Rapid Prototyping J., 19, 37, 10.1108/13552541311292718
Ruzaidi, 2017, Glidant effect of hydrophobic and hydrophilic nanosilica on a cohesive powder: Comparison of different flow characterization techniques, Particuology, 31, 69, 10.1016/j.partic.2016.04.006
Butscher, 2012, Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds, Acta Biomater., 8, 373, 10.1016/j.actbio.2011.08.027
Lefebvre, 2011, Dry coating of talc particles with fumed silica: Influence of the silica concentration on the wettability and dispersibility of the composite particles, Powder Technol., 208, 372, 10.1016/j.powtec.2010.08.031
Blümel, 2015, Increasing flowability and bulk density of PE-HD powders by a dry particle coating process and impact on LBM processes, Rapid Prototyping J., 21, 697, 10.1108/RPJ-07-2013-0074
Stöber, 1968, Controlled growth of monodisperse silica spheres in the micron size range, J. Colloid Interface Sci., 26, 62, 10.1016/0021-9797(68)90272-5
BaoGuo, 2017, One-pot in-situ surface modification of silica nanosphere by siloxane-coupled polycarboxylate with improved aqueous dispersion stability, J. Sol-Gel Sci. Technol., 83, 582, 10.1007/s10971-017-4443-7
Shah, 2008, Comparative evaluation of flow for pharmaceutical powders and granules, AAPS PharmSciTech, 9, 250, 10.1208/s12249-008-9046-8