Effect of modified polypropylene on the interfacial bonding of polymer–aluminum laminated films

Ryou, 2011, Mussel-inspired polydopamine-treated polyethylene separators for high-power Li-ion batteries, Adv. Mater., 23, 3066, 10.1002/adma.201100303 Wu, 2011, Hierarchical carbon-coated LiFePO4 nanoplate microspheres with high electrochemical performance for Li-ion batteries, Adv. Mater., 23, 1126, 10.1002/adma.201003713 Armand, 2008, Building better batteries, Nature, 451, 652, 10.1038/451652a Ng, 2007, Amorphous carbon-coated silicon nanocomposites: a low-temperature synthesis via spray pyrolysis and their application as high-capacity anodes for lithium-ion batteries, J. Phys. Chem. C, 111, 11131, 10.1021/jp072778d Sundaramurthy, 2014, Electrospun TiO2−δ nanofibers as insertion anode for Li-ion battery applications, J. Phys. Chem. C, 10.1021/jp412787z Sung, 2009, Crystal alignment of graphite as a negative electrode material of the lithium-ion secondary batteries, Mater. Des., 30, 387, 10.1016/j.matdes.2008.04.076 Costa, 2014, Poly(vinylidene fluoride)-based, co-polymer separator electrolyte membranes for lithium-ion battery systems, J. Power Sources, 245, 779, 10.1016/j.jpowsour.2013.06.151 Huang, 2014, Performance evaluation of a non-woven lithium ion battery separator prepared through a paper-making process, J. Power Sources, 256, 96, 10.1016/j.jpowsour.2014.01.080 Xia, 2013, Effect of surface pre-treatment on the hydrophilicity and adhesive properties of multilayered laminate used for lithium battery packaging, Appl. Surf. Sci., 268, 337, 10.1016/j.apsusc.2012.12.091 Mishra, 2007, Corrosion inhibition of aluminum alloy AA 2014 by rare earth chlorides, Corros. Sci., 49, 1027, 10.1016/j.corsci.2006.06.026 Zhao, 2001, Effects of chromate and chromate conversion coatings on corrosion of aluminum alloy 2024-T3, Surf. Coat. Technol., 140, 51, 10.1016/S0257-8972(01)01003-9 Xia, 2000, Storage and release of soluble hexavalent chromium from chromate conversion coatings equilibrium aspects of CrVI concentration, J. Electrochem. Soc., 147, 2556, 10.1149/1.1393568 Zhao, 1998, Corrosion protection of untreated AA-2024-T3 in chloride solution by a chromate conversion coating monitored with Raman spectroscopy, J. Electrochem. Soc., 145, 2258, 10.1149/1.1838630 Kendig, 1993, The mechanism of corrosion inhibition by chromate conversion coatings from X-ray absorption near edge spectroscopy (XANES), Corros. Sci., 34, 41, 10.1016/0010-938X(93)90257-H Chen, 2007, Improvement of shear strength of aluminium–polypropylene lap joints by grafting maleic anhydride onto polypropylene, Int. J. Adhes. Adhes., 27, 175, 10.1016/j.ijadhadh.2006.01.008 Schultz, 1989, Surface properties and adhesion mechanisms of graft polypropylenes, J. Mater. Sci., 24, 4363, 10.1007/BF00544513 Friedrich, 2005, Adhesion of metals to plasma-induced functional groups at polymer surfaces, Surf. Coat. Technol., 200, 565, 10.1016/j.surfcoat.2005.02.042 Tadanori, 1999, Adhesive ability and solvent solubility of propylene–butene copolymers modified with maleic anhydride, Int. J. Adhes. Adhes., 19, 367, 10.1016/S0143-7496(98)00072-4 Goushegir, 2014, Friction spot joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: microstructure and mechanical performance, Mater. Des., 54, 196, 10.1016/j.matdes.2013.08.034 Affrossman, 1996, Adsorption modes of a model adhesive resin, (methylamino)ethanol, on aluminum and phosphated aluminum surfaces, Langmuir, 12, 2090, 10.1021/la950635p Abel, 2000, Interaction of epoxy analogue molecules with organosilane-treated aluminum: a study by XPS and ToF-SIMS, Langmuir, 16, 6510, 10.1021/la9915724 Alexander, 1998, Interfacial interactions of plasma-polymerized acrylic acid and an oxidized aluminium surface investigated using XPS, FTIR and poly(acrylic acid) as a model compound, Surf. Interface Anal., 26, 961, 10.1002/(SICI)1096-9918(199812)26:13<961::AID-SIA432>3.0.CO;2-7 Harun, 2005, The effect of surface modification on the cathodic disbondment rate of epoxy and alkyd coatings, Prog. Org. Coat., 54, 317, 10.1016/j.porgcoat.2005.07.007 Lee, 2009, Surface functionalization of a poly(vinylidene fluoride): effect on the adhesive and piezoelectric properties, ACS Appl. Mater. Interfaces, 12, 2902, 10.1021/am900616s Awaja, 2009, Adhesion of polymers, Prog. Polym. Sci., 34, 948, 10.1016/j.progpolymsci.2009.04.007 Liang, 2014, Molybdate-based conversion treatment for improving the peeling strength between aluminum foil and polypropylene grafted with glycidyl methacrylate, Surf. Coat. Technol., 249, 1, 10.1016/j.surfcoat.2014.03.038 Kwork, 1999, Contact angle measurement and contact angle interpretation, Adv. Colloid Interface Sci., 81, 167, 10.1016/S0001-8686(98)00087-6 Wang, 2004, PH sensitive polypropylene porous membrane prepared by grafting acrylic acid in supercritical carbon dioxide, Polymer, 45, 855, 10.1016/j.polymer.2003.11.042 Sathe, 1994, Grafting of maleic anhydride onto polypropylene: synthesis and characterization, J. Appl. Polym. Sci., 53, 239, 10.1002/app.1994.070530212 Ao, 2007, Compatibilization of PP/SEBS-MAH blends by grafting glycidyl methacrylate onto polypropylene, Polym. Bull., 59, 279, 10.1007/s00289-007-0764-y Burton, 2010, Reactive grafting of glycidyl methacrylate onto polypropylene, J. Appl. Polym. Sci., 117, 2707 Hwang, 2003, UV-induced graft polymerization of polypropylene-g-glycidyl methacrylate membrane in the vapor phase, Macromol. Res., 11, 495, 10.1007/BF03218982 Kataby, 1999, Coating carboxylic acids on amorphous iron nanoparticles, Langmuir, 15, 1703, 10.1021/la981001w Shustak, 2004, Preparation and characterization of n-alkanoic acid self-assembled monolayers adsorbed on 316L stainless steel, Langmuir, 20, 7499, 10.1021/la036470z Thissen, 2010, Formation and stability of organophosphonic acid monolayers on ZnAl alloy coatings, Surf. Coat. Technol., 204, 3578, 10.1016/j.surfcoat.2010.04.027 Taheri, 2013, Bonding mechanisms at buried interfaces between carboxylic polymers and treated zinc surfaces, J. Phys. Chem. C, 117, 2780, 10.1021/jp3093572 Li, 2006, A study on interfacial mechanisms and structure of poly(ethylene-co-methacrylic acid)/copper with reflection–absorption infrared spectroscopy, J. Mater. Sci., 41, 8271, 10.1007/s10853-006-1006-7 Hidetoshi, 1996, Stabilization of the polymer–metal interface, Prog. Org. Coat., 28, 9, 10.1016/0300-9440(95)00587-0