Printability and performance of 3D conductive graphite structures

Frketic, 2017, Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: an additive review of contemporary and modern techniques for advanced materials manufacturing, Addit. Manuf., 14, 69 Roy, 2015 Bonaccorso, 2016, 2D‐crystal‐based functional inks, Adv. Mater., 28, 6136, 10.1002/adma.201506410 Fu, 2016, Graphene oxide‐based electrode inks for 3D‐printed lithium‐ion batteries, Adv. Mater., 28, 2587, 10.1002/adma.201505391 Chen, 2013, Lightweight and flexible graphene foam composites for high‐performance electromagnetic interference shielding, Adv. Mater., 25, 1296, 10.1002/adma.201204196 Shen, 2014, Ultrathin flexible graphene film: an excellent thermal conducting material with efficient EMI shielding, Adv. Funct. Mater., 24, 4542, 10.1002/adfm.201400079 Tang, 2010, Cellulose Whisker/Epoxy resin nanocomposites, ACS Appl. Mater. Interfaces, 2, 1073, 10.1021/am900830h Yu, 2008, Enhanced thermal conductivity in a hybrid graphite nanoplatelet – carbon nanotube filler for epoxy composites, Adv. Mater., 20, 4740, 10.1002/adma.200800401 Nguyen, 2017, Direct printing of thermal management device using low-cost composite ink, Macromol. Mater. Eng., 302, 1700135, 10.1002/mame.201700135 Supova, 2011, Effect of nanofillers dispersion in polymer matrices: a review, Sci. Adv. Mater., 3, 1, 10.1166/sam.2011.1136 Karyappa, 2019, Chocolate-based ink three-dimensional printing (Ci3DP), Sci. Rep., 9, 14178, 10.1038/s41598-019-50583-5 Elsayed, 2019, Direct ink writing of three dimensional Ti2AlC porous structures, Addit. Manuf., 28, 365 Farahani, 2018, Printing polymer nanocomposites and composites in three dimensions, Adv. Eng. Mater., 20, 1700539, 10.1002/adem.201700539 Hmeidat, 2018, High-strength epoxy nanocomposites for 3D printing, Compos. Sci. Technol., 160, 10.1016/j.compscitech.2018.03.008 Huang, 2018, Anisotropy of graphene scaffolds assembled by three-dimensional printing, Carbon, 130, 1, 10.1016/j.carbon.2017.12.120 Kang, 2016, A 3D bioprinting system to produce human-scale tissue constructs with structural integrity, Nat. Biotechnol., 34, 312, 10.1038/nbt.3413 Roy, 2020, Effects of geometry constraints and fiber orientation in field assisted extrusion-based processing, Addit. Manuf., 32, 101022 Compton, 2014 Compton, 2018, Electrical and mechanical properties of 3D-printed graphene-reinforced epoxy, JOM, 70, 292, 10.1007/s11837-017-2707-x Hmeidat, 2020, Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing, Addit. Manuf., 34, 101385 Peng, 1999, Orientation effects in freeformed short-fiber composites, Compos. Part A Appl. Sci. Manuf., 30, 133, 10.1016/S1359-835X(98)00110-9 Lewis, 2006, Direct ink writing of three‐dimensional ceramic structures, J. Am. Ceram. Soc., 89, 3599, 10.1111/j.1551-2916.2006.01382.x Rauzan, 2018, A printing-centric approach to the electrostatic modification of polymer/clay composites for use in 3D direct-ink writing, Adv. Mater. Interfaces, 5, 1701579, 10.1002/admi.201701579 Paxton, 2017, Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability, Biofabrication, 9, 044107, 10.1088/1758-5090/aa8dd8 Gao, 2018, Optimization of gelatin-alginate composite bioink printability using rheological parameters: a systematic approach, Biofabrication, 10, 034106, 10.1088/1758-5090/aacdc7 King, 2013, Mechanical properties of graphene nanoplatelet/epoxy composites, J. Appl. Polym. Sci., 128, 4217, 10.1002/app.38645 Paton, 2014, Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids, Nat. Mater., 13, 624, 10.1038/nmat3944 Penu, 2012, Rheological and electrical percolation thresholds of carbon nanotube/polymer nanocomposites, Polym. Eng. Sci., 52, 2173, 10.1002/pen.23162 Al Sheheri, 2019, The preparation of carbon nanofillers and their role on the performance of variable polymer nanocomposites, Des. Monomers Polym., 22, 8, 10.1080/15685551.2019.1565664 King, 2012 Kota, 2007, Electrical and rheological percolation in polystyrene/MWCNT nanocomposites, Macromolecules, 40, 7400, 10.1021/ma0711792 Krieg, 2018, Tensile and conductivity properties of epoxy composites containing carbon black and graphene nanoplatelets, J. Compos. Mater., 52, 3909, 10.1177/0021998318771460 Li, 2005, Conductive graphite nanoplatelet/epoxy nanocomposites: effects of exfoliation and UV/ozone treatment of graphite, Scr. Mater., 53, 235, 10.1016/j.scriptamat.2005.03.034 Pradhan, 2019, Graphene nanoplatelets in polychloroprene matrix: an insight to dispersion with a special emphasize to electro-mechanical properties, Polym. Compos., 40, E1871, 10.1002/pc.25180 Billaud, 2016, Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries, Nat. Energy, 1, 1, 10.1038/nenergy.2016.97 Duan, 2019, Effect of carbon nanofiller dimension on synergistic EMI shielding network of epoxy/metal conductive foams, Compos. Part A Appl. Sci. Manuf., 118, 41, 10.1016/j.compositesa.2018.12.016 Jin, 2011, Graphene-based nanostructured hybrid materials for conductive and superhydrophobic functional coatings, J. Nanosci. Nanotechnol., 11, 7715, 10.1166/jnn.2011.4730 Oh, 2018, Fabrication of high-performance graphene nanoplatelet-based transparent electrodes via self-interlayer-exfoliation control, Nanoscale, 10, 2351, 10.1039/C7NR08078F Wei, 2015, 3D printable graphene composite, Sci. Rep., 5 Wu, 2018, A self-healing, adaptive and conductive polymer composite ink for 3D printing of gas sensors, J. Mater. Chem. C, 6, 6200, 10.1039/C8TC01092G Prolongo, 2014, Advantages and disadvantages of the addition of graphene nanoplatelets to epoxy resins, Eur. Polym. J., 61, 206, 10.1016/j.eurpolymj.2014.09.022 Fallon, 2019, Highly loaded fiber filled polymers for material extrusion: a review of current understanding, Addit. Manuf., 30, 100810 Jiang, 2017, Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication, Addit. Manuf., 84 Wu, 2015, Aligning multilayer graphene flakes with an external electric field to improve multifunctional properties of epoxy nanocomposites, Carbon, 94, 607, 10.1016/j.carbon.2015.07.026 Botta, 2018, Reprocessing of PLA/graphene nanoplatelets nanocomposites, Polymers, 10, 18, 10.3390/polym10010018 Xu, 2019, In situ alignment of graphene nanoplatelets in poly(vinyl alcohol) nanocomposite fibers with controlled stepwise interfacial exfoliation, Nanoscale Adv., 2510, 10.1039/C9NA00191C Prolongo, 2013, In situ processing of epoxy composites reinforced with graphene nanoplatelets, Compos. Sci. Technol., 86, 185, 10.1016/j.compscitech.2013.06.020 Zhao, 2006, Facile preparation of epoxy-based composite with oriented graphite nanosheets, Polymer, 47, 8401, 10.1016/j.polymer.2006.09.025 Jia, 2017, High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing, Compos. Sci. Technol., 145, 55, 10.1016/j.compscitech.2017.03.035 Kojima, 1995, Novel preferred orientation in injection‐molded nylon 6‐clay hybrid, J. Polym. Sci. Part B: Polym. Phys., 10.1002/polb.1995.090330707 Okamoto, 2001, A house of cards structure in polypropylene/clay nanocomposites under elongational flow, Nano Lett., 1, 295, 10.1021/nl0100163 Okamoto, 2001, Biaxial flow-induced alignment of silicate layers in polypropylene/clay nanocomposite foam, Nano Lett., 1, 503, 10.1021/nl010051+