A review on cathode processes and materials for electro-reduction of carbon dioxide in solid oxide electrolysis cells

Daily CO2, URL:co2.earth/daily-co2. , 2020 (accessed 16 Dec 2020). Hoegh-Guldberg, 2019, The human imperative of stabilizing global climate change at 1.5 degrees C, Science, 365, 1, 10.1126/science.aaw6974 Martin, 2015, Towards sustainable fuels and chemicals through the electrochemical reduction of CO2: lessons from water electrolysis, Green Chem., 17, 5114, 10.1039/C5GC01893E Hauch, 2020, Recent advances in solid oxide cell technology for electrolysis, Science, 370, 10.1126/science.aba6118 Zheng, 2017, Energy related CO2 conversion and utilization: advanced materials/nanomaterials, reaction mechanisms and technologies, Nanomater. Energy, 40, 512, 10.1016/j.nanoen.2017.08.049 Opitz, 2017, Surface chemistry of perovskite-type electrodes during high Temperature CO2 electrolysis investigated by operando photoelectron spectroscopy, ACS Appl. Mater. Interfaces, 9, 35847, 10.1021/acsami.7b10673 Yang, 2019, CO2 activation and reduction on Pt-CeO2-Based catalysts, J. Phys. Chem. C, 123, 17092, 10.1021/acs.jpcc.9b02878 Ren, 2018, First-principles based microkinetic modeling of CO2 reduction at the Ni/SDC cathode of a solid oxide electrolysis cell, J. Phys. Chem. C, 122, 21151, 10.1021/acs.jpcc.8b05312 Zheng, 2018, Barium carbonate as a synergistic catalyst for the H2O/CO2 reduction reaction at Ni–yttria stabilized zirconia cathodes for solid oxide electrolysis cells, J. Mater. Chem., 6, 2721, 10.1039/C7TA08249E Stoots, 2009, Results of recent high temperature coelectrolysis studies at the Idaho National Laboratory, Int. J. Hydrogen Energy, 34, 4208, 10.1016/j.ijhydene.2008.08.029 Ebbesen, 2014, High temperature electrolysis in alkaline cells, solid proton conducting cells, and solid oxide cells, Chem. Rev., 114, 10697, 10.1021/cr5000865 Shi, 2019, Controllable CO2 conversion in high performance proton conducting solid oxide electrolysis cells and the possible mechanisms, J. Mater. Chem., 7, 4855, 10.1039/C8TA12458B Duan, 2019, Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production, Nature Energy, 4, 230, 10.1038/s41560-019-0333-2 Ruiz-Trejo, 2013, Electrolysis of CO2 in a proton conducting membrane, Solid State Ionics, 252, 157, 10.1016/j.ssi.2013.05.021 Danilov, 2018, CO2-promoted hydrogen production in a protonic ceramic electrolysis cell, J. Mater. Chem., 6, 16341, 10.1039/C8TA05820B Gan, 2016, Demonstration of direct conversion of CO2/H2O into syngas in a symmetrical proton-conducting solid oxide electrolyzer, Int. J. Hydrogen Energy, 41, 1170, 10.1016/j.ijhydene.2015.11.032 Wu, 2013, Electrochemical conversion of H2O/CO2 to fuel in a proton-conducting solid oxide electrolyser, J. Power Sources, 232, 187, 10.1016/j.jpowsour.2013.01.039 Murphy, 2020, A new family of proton‐conducting electrolytes for reversible solid oxide cells: BaHfxCe0.8-xY0.1Yb0.1O3-δ, Adv. Funct. Mater., 30, 2002265, 10.1002/adfm.202002265 Li, 2015, Heterogeneous catalytic conversion of CO2: a comprehensive theoretical review, Nanoscale, 7, 8663, 10.1039/C5NR00092K Nakamura, 2015, A basic quantum chemical review on the activation of CO2, 123 Liu, 2016, Highly stable and efficient catalyst with in Situ exsolved Fe–Ni alloy nanospheres socketed on an oxygen deficient perovskite for direct CO2 electrolysis, ACS Catal., 6, 6219, 10.1021/acscatal.6b01555 Xu, 2013, Direct electrolysis of CO2 using an oxygen-ion conducting solid oxide electrolyzer based on La0.75Sr0.25Cr0.5Mn0.5O3 − δ electrode, J. Power Sources, 230, 115, 10.1016/j.jpowsour.2012.12.068 Menon, 2015, A model-based understanding of solid-oxide electrolysis cells (SOECs) for syngas production by H2O/CO2 co-electrolysis, J. Power Sources, 274, 768, 10.1016/j.jpowsour.2014.09.158 Narasimhaiah, 2013, Modeling CO2 electrolysis in solid oxide electrolysis cell, J. Solid State Electrochem., 17, 2361, 10.1007/s10008-013-2081-8 Gu, 2017, First-principles study of high temperature CO2 electrolysis on transition metal electrocatalysts, Ind. Eng. Chem. Res., 56, 6155, 10.1021/acs.iecr.7b00854 Wang, 2007, Factors controlling the interaction of CO2 with transition metal surfaces, J. Phys. Chem. C, 111, 16934, 10.1021/jp074570y Ko, 2016, Density functional theory study for catalytic activation and dissociation of CO2 on bimetallic alloy surfaces, J. Phys. Chem. C, 120, 3438, 10.1021/acs.jpcc.6b00221 Ding, 2007, Interaction of carbon dioxide with Ni(110): a combined experimental and theoretical study, Phys. Rev. B, 76, 195425, 10.1103/PhysRevB.76.195425 Norton, 1976, Photoelectron spectroscopic studies of the adsorption of CO and CO2 on nickel, platinum and copper, Chem. Phys. Lett., 38, 207, 10.1016/0009-2614(76)85136-6 Wang, 2005, Chemisorption of CO2 on nickel surface, J. Phys. Chem. B, 109, 18956, 10.1021/jp052355g Hess, 1995, The adsorption and catalytic decomposition of CO2 on Fe (111) surfaces studied with high resolution EELS, Surf. Sci., 331, 138, 10.1016/0039-6028(95)00177-8 Víctor, 2008, Evidence for spontaneous CO2 activation on cobalt surfaces, Chem. Phys. Lett., 454, 262, 10.1016/j.cplett.2008.02.004 Liu, 2012, CO2 reduction on transition metal (Fe, Co, Ni, and Cu) surfaces: in comparison with homogeneous catalysis, J. Phys. Chem. C, 116, 5681, 10.1021/jp210480c Bligaard, 2004, The Brønsted–Evans–Polanyi relation and the volcano curve in heterogeneous catalysis, J. Catal., 224, 206, 10.1016/j.jcat.2004.02.034 Auroux, 1990, Microcalorimetric study of the acidity and basicity of metal oxide surfaces, J. Phys. Chem. C, 94, 6371, 10.1021/j100379a041 Yong, 2002, Adsorption of carbon dioxide at high temperature—a review, Separ. Purif. Technol., 26, 195, 10.1016/S1383-5866(01)00165-4 Yan, 2008, A temperature programmed desorption investigation on the interaction of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite oxides with CO2 in the absence and presence of H2O and O2, Appl. Catal. B Environ., 80, 24, 10.1016/j.apcatb.2007.11.007 Ye, 2017, Highly efficient CO2 electrolysis on cathodes with exsolved alkaline earth oxide nanostructures, ACS Appl. Mater. Interfaces, 9, 25350, 10.1021/acsami.7b07039 Hu, 2019, Detrimental phase evolution triggered by Ni in perovskite-type cathodes for CO2 electroreduction, J. Energy Chem., 36, 87, 10.1016/j.jechem.2019.06.001 Qi, 2014, Remarkable chemical adsorption of manganese-doped titanate for direct carbon dioxide electrolysis, J. Mater. Chem., 2, 6904, 10.1039/C4TA00344F Kumari, 2016, Role of reduced CeO2(110) surface for CO2 reduction to CO and methanol, J. Phys. Chem. C, 120, 16626, 10.1021/acs.jpcc.6b02860 Jiang, 2019, Sr2Fe1.4Mn0.1Mo0.5O6−δ perovskite cathode for highly efficient CO2 electrolysis, J. Mater. Chem., 7, 22939, 10.1039/C9TA07689A Ackermann, 2015, Kinetics of CO2 reduction over nonstoichiometric ceria, J. Phys. Chem. C, 119, 16452, 10.1021/acs.jpcc.5b03464 Yu, 2014, CO2 activation and carbonate intermediates: an operando AP-XPS study of CO2 electrolysis reactions on solid oxide electrochemical cells, Phys. Chem. Chem. Phys., 16, 11633, 10.1039/C4CP01054J Feng, 2015, Surface electrochemistry of CO2 reduction and CO oxidation on Sm-doped CeO(2-x): coupling between Ce (3+) and carbonate adsorbates, Phys. Chem. Chem. Phys., 17, 12273, 10.1039/C5CP00114E Skafte, 2019, Selective high-temperature CO2 electrolysis enabled by oxidized carbon intermediates, Nature Energy, 4, 846, 10.1038/s41560-019-0457-4 Wang, 2019, Threshold catalytic onset of carbon formation on CeO2 during CO2 electrolysis: mechanism and inhibition, J. Mater. Chem., 7, 15233, 10.1039/C9TA03265G Cheng, 2013, Carbon dioxide activation and dissociation on ceria (110): a density functional theory study, J. Chem. Phys., 138, 10.1063/1.4773248 Hahn, 2015, Functionalization of CeO2 (1 1 1) by deposition of small Ni clusters: effects on CO2 adsorption and O vacancy formation, ChemCatChem, 7, 625, 10.1002/cctc.201402906 Yang, 2018, The electrochemical performance and CO2 reduction mechanism on strontium doped lanthanum ferrite fuel electrode in solid oxide electrolysis cell, Electrochim. Acta, 284, 159, 10.1016/j.electacta.2018.07.187 Ren, 2020, A theoretical study on CO2 electrolysis through synergistic manipulation of Ni/Mn doping and oxygen vacancies in La(Sr)FeO3, J. Catal., 383, 273, 10.1016/j.jcat.2020.01.033 Li, 2019, Perovskite oxyfluoride electrode enabling direct electrolyzing carbon dioxide with excellent electrochemical performances, Adv. Energy Mater., 9, 1803156, 10.1002/aenm.201803156 Sullivan, 1995, In-situ-produced methane and methane/carbon monoxide mixtures for return propulsion from Mars, J. Propul. Power, 11, 1056, 10.2514/3.23935 Sridhar, 1997, Oxygen production on Mars using solid oxide electrolysis, Solid State Ionics, 93, 321, 10.1016/S0167-2738(96)00513-9 Sridhar, 1997, Effect of oxygen-containing species on the impedance of the Pt/YSZ interface, Solid State Ionics, 100, 17, 10.1016/S0167-2738(97)00322-6 Sridhar, 2004, Combined H2O/CO2 solid oxide electrolysis for Mars in situ resource utilization, J. Propul. Power, 20, 892, 10.2514/1.3480 Tao, 2004, Study of carbon dioxide electrolysis at electrode/electrolyte interface: Part I. Pt/YSZ interface, Solid State Ionics, 175, 615, 10.1016/j.ssi.2004.01.077 Tao, 2004, Study of carbon dioxide electrolysis at electrode/electrolyte interface: Part II. Pt-YSZ cermet/YSZ interface, Solid State Ionics, 175, 621, 10.1016/j.ssi.2004.02.075 Wang, 2013, Ni–Fe bimetallic cathodes for intermediate temperature CO2 electrolyzers using a La0.9Sr0.1Ga0.8Mg0.2O3 electrolyte, J. Mater. Chem., 1, 12455, 10.1039/c3ta11863k Wang, 2015, Ni-Fe-La(Sr)Fe(Mn)O3as a new active cermet cathode for intermediate-temperature CO2 electrolysis using a LaGaO3-based electrolyte, Adv. Energy Mater., 5, 1401003, 10.1002/aenm.201401003 Mogensen, 1996, Kinetic and geometric aspects of solid oxide fuel cell electrodes, Solid State Ionics, 86–8, 1151, 10.1016/0167-2738(96)00280-9 Wang, 2014, Electrical conductivity relaxation of Sr2Fe1.5Mo0.5O6−δ–Sm0.2Ce0.8O1.9 dual-phase composites, J. Mater. Chem., 2, 136, 10.1039/C3TA12787G Hu, 2015, Measuring oxygen surface exchange kinetics on mixed-conducting composites by electrical conductivity relaxation, J. Mater. Chem., 3, 10296, 10.1039/C5TA00510H Nakagawa, 1995, Evaluation of the effective reaction zone at Ni (NiO)/zirconia anode by using an electrode with a novel structure, J. Electrochem. Soc., 142, 3474, 10.1149/1.2050007 Jensen, 2007, Hydrogen and synthetic fuel production from renewable energy sources, Int. J. Hydrogen Energy, 32, 3253, 10.1016/j.ijhydene.2007.04.042 Ebbesen, 2009, Electrolysis of carbon dioxide in solid oxide electrolysis cells, J. Power Sources, 193, 349, 10.1016/j.jpowsour.2009.02.093 Zhan, 2010, Electrochemical reduction of CO2 in solid oxide electrolysis cells, J. Power Sources, 195, 7250, 10.1016/j.jpowsour.2010.05.037 Graves, 2011, Co-electrolysis of CO2 and H2O in solid oxide cells: performance and durability, Solid State Ionics, 192, 398, 10.1016/j.ssi.2010.06.014 Shi, 2013, Experimental characterization and modeling of the electrochemical reduction of CO2 in solid oxide electrolysis cells, Electrochim. Acta, 88, 644, 10.1016/j.electacta.2012.10.107 Yan, 2014, High-efficiency intermediate temperature solid oxide electrolyzer cells for the conversion of carbon dioxide to fuels, J. Power Sources, 252, 79, 10.1016/j.jpowsour.2013.11.047 Dipu, 2015, Electrolysis of carbon dioxide for carbon monoxide production in a tubular solid oxide electrolysis cell, Ann. Nucl. Energy, 81, 257, 10.1016/j.anucene.2015.02.046 Liu, 2017, A highly-performed, dual-layered cathode supported solid oxide electrolysis cell for efficient CO2 electrolysis fabricated by phase inversion Co-tape casting method, J. Electrochem. Soc., 164, F1130, 10.1149/2.0841712jes Dong, 2017, Hierarchically ordered porous Ni-based cathode-supported solid oxide electrolysis cells for stable CO2 electrolysis without safe gas, J. Mater. Chem., 5, 24098, 10.1039/C7TA06839E Song, 2018, Pure CO2 electrolysis over Ni/YSZ cathode in solid oxide electrolysis cell, J. Mater. Chem., 6, 13661, 10.1039/C8TA02858C Luo, 2017, Mechanism for reversible CO/CO2 electrochemical conversion on a patterned nickel electrode, J. Power Sources, 366, 93, 10.1016/j.jpowsour.2017.09.019 Wang, 2019, Enhanced carbon dioxide electrolysis at redox manipulated interfaces, Nat. Commun., 10, 1 Rabuni, 2020, High performance micro-monolithic reversible solid oxide electrochemical reactor, J. Power Sources, 458, 228026, 10.1016/j.jpowsour.2020.228026 Zhang, 2017, Electrochemical characterization and mechanism analysis of high temperature Co-electrolysis of CO2 and H2O in a solid oxide electrolysis cell, Int. J. Hydrogen Energy, 42, 29911, 10.1016/j.ijhydene.2017.06.225 Hauch, 2005, Stability of solid oxide electrolyser cells, 216 Zhan, 2009, Syngas production by coelectrolysis of CO2/H2O: the basis for a renewable energy cycle, Energy & Fuels, 23, 3089, 10.1021/ef900111f Ebbesen, 2009, Production of synthetic fuels by co-electrolysis of steam and carbon dioxide, Int. J. Green Energy, 6, 646, 10.1080/15435070903372577 Ebbesen, 2012, Co-electrolysis of steam and carbon dioxide in solid oxide cells, J. Electrochem. Soc., 159, F482, 10.1149/2.076208jes Chen, 2013, Microstructural degradation of Ni/YSZ electrodes in solid oxide electrolysis cells under high current, J. Electrochem. Soc., 160, F883, 10.1149/2.098308jes Mahmood, 2015, Effect of operating conditions on the performance of solid electrolyte membrane reactor for steam and CO2 electrolysis, J. Membr. Sci., 473, 8, 10.1016/j.memsci.2014.09.002 Tao, 2016, Degradation of solid oxide cells during co-electrolysis of steam and carbon dioxide at high current densities, J. Power Sources, 328, 452, 10.1016/j.jpowsour.2016.08.055 Skafte, 2018, Carbon deposition and sulfur poisoning during CO2 electrolysis in nickel-based solid oxide cell electrodes, J. Power Sources, 373, 54, 10.1016/j.jpowsour.2017.10.097 Ebbesen, 2010, Poisoning of solid oxide electrolysis cells by impurities, J. Electrochem. Soc., 157, B1419, 10.1149/1.3464804 Singh, 2015, Feasibility of alternative electrode materials for high temperature CO2 reduction on solid oxide electrolysis cell, J. Power Sources, 293, 642, 10.1016/j.jpowsour.2015.05.088 Singh, 2016, Influence of fabrication routes on microstructure and electrochemical performance of Ni–GDC cathode for high temperature CO2 reduction in solid oxide electrolysis cells, J. Electrochem. Soc., 163, F3084, 10.1149/2.0111611jes Xie, 2015, Electrolysis of carbon dioxide in a solid oxide electrolyzer with silver-gadolinium-doped ceria cathode, J. Electrochem. Soc., 162, 10.1149/2.0501504jes Cheng, 2013, Reduction of CO2 to CO at Cu–ceria-gadolinia (CGO) cathode in solid oxide electrolyser, J. Appl. Electrochem., 43, 1131, 10.1007/s10800-013-0566-x Kumari, 2019, Carbon dioxide reduction on the composite of copper and praseodymium-doped ceria electrode in a solid oxide electrolysis cells, Ionics, 25, 3165, 10.1007/s11581-019-02837-5 Hu, 2019, Active and stable Ni/Cr2O3-δ cathodes for high temperature CO2 electrolysis, J. Power Sources, 430, 20, 10.1016/j.jpowsour.2019.05.014 Bidrawn, 2008, Efficient reduction of CO2 in a solid oxide electrolyzer, Electrochem. Solid State Lett., 11, B167, 10.1149/1.2943664 Li, 2016, A nanostructured ceramic fuel electrode for efficient CO2/H2O electrolysis without safe gas, J. Mater. Chem., 4, 9236, 10.1039/C6TA02830F Zhang, 2018, La0.75Sr0.25)0.95(Cr0.5Mn0.5)O3-δ-Ce0.8Gd0.2O1.9 scaffolded composite cathode for high temperature CO2 electroreduction in solid oxide electrolysis cell, J. Power Sources, 400, 104, 10.1016/j.jpowsour.2018.08.017 Huang, 2019, Efficient CO2 electroreduction on a solid oxide electrolysis cell with La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.2Ce0.8O2-δ infiltrated electrode, J. Power Sources, 434, 226730, 10.1016/j.jpowsour.2019.226730 Yue, 2017, Modification of LSCM–GDC cathodes to enhance performance for high temperature CO2 electrolysis using solid oxide electrolysis cells (SOECs), J. Mater. Chem., 5, 7081, 10.1039/C6TA09421J Nolan, 2009, Molecular adsorption on the doped (110) ceria surface, J. Phys. Chem. C, 113, 2425, 10.1021/jp809292u Kumari, 2015, Density functional theory study of CO2 adsorption and reduction on stoichiometric and doped ceria, ECS Transactions, 68, 155, 10.1149/06803.0155ecst Yang, 2017, Carbon dioxide adsorption on CeO2 (110): an XPS and NEXAFS study, ChemPhysChem, 18, 1874, 10.1002/cphc.201700240 Ju, 2019, Insights into the CO2 deoxygenation to CO over oxygen vacancies of CeO2, Catal. Sci. Technol., 9, 2118, 10.1039/C9CY00111E Ren, 2018, Fabrication and characterization of microtubular solid oxide cells for CO2/CO redox operations, J. Appl. Electrochem., 48, 959, 10.1007/s10800-018-1225-z Robert, 2008, Green, Stuart B. Adler, Carbon dioxide reduction on gadolinia-doped ceria cathodes, Solid State Ionics, 179, 647, 10.1016/j.ssi.2008.04.024 Qi, 2014, Single-phase nickel-doped ceria cathode with in situ grown nickel nanocatalyst for direct high-temperature carbon dioxide electrolysis, RSC Adv., 4, 40494, 10.1039/C4RA06712F Shin, 2015, Ce(Mn,Fe)O2–(La,Sr)(Fe,Mn)O3 composite as an active cathode for electrochemical reduction of CO2 in proton conducting solid oxide cells, Solid State Ionics, 275, 106, 10.1016/j.ssi.2015.03.015 Huang, 2019, Charge transfer reactions in CO₂ electroreduction on manganese doped ceria, ChemElectroChem, 6, 1668, 10.1002/celc.201801427 Su, 2019, Kinetics of CO2 electrolysis on composite electrodes consisting of Cu and samaria-doped ceria, J. Mater. Chem., 7, 1598, 10.1039/C8TA09015G Huang, 2020, Enhancing cathode performance for CO2 electrolysis with Ce0.9M0.1O2−δ (M=Fe, Co, Ni) catalysts in solid oxide electrolysis cell, J. Energy Chem., 40, 46, 10.1016/j.jechem.2019.02.007 Wu, 2020, Electrochemical performance of La0.3Sr0.7Ti0.3Fe0.7O3-δ/CeO2 composite cathode for CO2 reduction in solid oxide electrolysis cells, J. Power Sources, 451, 227334, 10.1016/j.jpowsour.2019.227334 Feng, 2020, Platinum‐decorated ceria enhances CO2 electroreduction in solid oxide electrolysis cells, ChemSusChem, 13, 1, 10.1002/cssc.202001002 Xu, 2019, Double perovskites in catalysis, electrocatalysis, and photo(electro)catalysis, Trends in Chemistry, 1, 410, 10.1016/j.trechm.2019.05.006 Tao, 2003, A redox-stable efficient anode for solid-oxide fuel cells, Nat. Mater., 2, 320, 10.1038/nmat871 Yue, 2012, Alternative cathode material for CO2 reduction by high temperature solid oxide electrolysis cells, J. Electrochem. Soc., 159, F441, 10.1149/2.040208jes Yue, 2012, Impedance studies on LSCM/GDC cathode for high temperature CO2 electrolysis, Electrochem. Solid State Lett., 15, B31, 10.1149/2.021203esl Yue, 2015, Understanding of CO2 electrochemical reduction reaction process via high temperature solid oxide electrolysers, ECS Transactions, 68, 3535, 10.1149/06801.3535ecst Pan, 2020, Highly active and stable A-site Pr-doped LaSrCrMnO-based fuel electrode for direct CO2 solid oxide electrolyzer cells, Int. J. Hydrogen Energy, 366, 93 Li, 2014, Chromate cathode decorated with in-situ growth of copper nanocatalyst for high temperature carbon dioxide electrolysis, Int. J. Hydrogen Energy, 39, 20888, 10.1016/j.ijhydene.2014.10.053 Zhang, 2016, Perovskite LSCM impregnated with vanadium pentoxide for high temperature carbon dioxide electrolysis, Electrochim. Acta, 212, 32, 10.1016/j.electacta.2016.06.137 Zhu, 2017, Efficient carbon dioxide electrolysis with metal nanoparticles loaded La0.75Sr0.25Cr0.5Mn0.5O3-δ cathodes, J. Power Sources, 363, 177, 10.1016/j.jpowsour.2017.07.070 Zhang, 2019, Nano-CeO2-modified cathodes for direct electrochemical CO2 reduction in solid oxide electrolysis cells, ACS Sustain. Chem. Eng., 7, 9629, 10.1021/acssuschemeng.9b01183 Ruan, 2015, A redox-stable chromate cathode decorated with in situ grown nickel nanocatalyst for efficient carbon dioxide electrolysis, Catal. Sci. Technol., 5, 1929, 10.1039/C4CY01254B Xing, 2015, Co-electrolysis of steam and CO2 in a solid oxide electrolysis cell with La0.75Sr0.25Cr0.5Mn0.5O3−δ –Cu ceramic composite electrode, J. Power Sources, 274, 260, 10.1016/j.jpowsour.2014.10.066 Yoon, 2015, Improvements in co-electrolysis performance and long-term stability of solid oxide electrolysis cells based on ceramic composite cathodes, Int. J. Hydrogen Energy, 40, 13558, 10.1016/j.ijhydene.2015.08.012 Kwon, 2019, Long-term durability of La0.75Sr0.25Cr0.5Mn0.5O3 as a fuel electrode of solid oxide electrolysis cells for co-electrolysis, J. CO2 Util., 31, 192, 10.1016/j.jcou.2019.03.004 Zhou, 2019, Study of CO2 and H2O direct co-electrolysis in an electrolyte-supported solid oxide electrolysis cell by aqueous tape casting technique, Int. J. Hydrogen Energy, 44, 28939, 10.1016/j.ijhydene.2019.09.141 Addo, 2015, CO/CO2 study of high performance La0.3Sr0.7Fe0.7Cr0.3O3-δ reversible SOFC electrodes, Fuel Cell., 15, 689, 10.1002/fuce.201400196 Molero-Sanchez, 2015, Electrochemistry of La0.3Sr0.7Fe0.7Cr0.3O3-δ as an oxygen and fuel electrode for RSOFCs, Faraday Discuss, 182, 159, 10.1039/C5FD00029G Yao, 2015, Perovskite chromate doped with titanium for direct carbon dioxide electrolysis, New J. Chem., 39, 2956, 10.1039/C4NJ01868K Zhang, 2016, Highly active and redox-stable Ce-doped LaSrCrFeO-based cathode catalyst for CO2 SOECs, ACS Appl. Mater. Interfaces, 8, 6457, 10.1021/acsami.5b11979 Sun, 2020, Direct electrolysis of CO2 in solid oxide cells supported on ceramic fuel electrodes with straight open pores and coated catalysts, Solid State Ionics, 344, 115154, 10.1016/j.ssi.2019.115154 Ding, 2020, A-site deficient perovskite with nano-socketed Ni-Fe alloy particles as highly active and durable catalyst for high-temperature CO2 electrolysis, Electrochim. Acta, 335, 135683, 10.1016/j.electacta.2020.135683 Marina, 2002, Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate, Solid State Ionics, 149, 21, 10.1016/S0167-2738(02)00140-6 Verbraeken, 2015, Modified strontium titanates: from defect chemistry to SOFC anodes, RSC Adv., 5, 1168, 10.1039/C4RA09751C Kamecki, 2018, Structural and electrical transport properties of Pr-doped SrTi0.93Co0.07O3-δ a novel SOEC fuel electrode materials, J. Electroceram., 42, 31, 10.1007/s10832-018-0143-0 Li, 2012, Composite fuel electrode La0.2Sr0.8TiO3-δ-Ce0.8Sm0.2O2-δ for electrolysis of CO2 in an oxygen-ion conducting solid oxide electrolyser, Phys. Chem. Chem. Phys., 14, 15547, 10.1039/c2cp42232h Cumming, 2016, Nickel impregnated cerium-doped strontium titanate fuel electrode: direct carbon dioxide electrolysis and Co-electrolysis, J. Electrochem. Soc., 163, F3057, 10.1149/2.0081611jes Dogu, 2019, CO2 and H2O electrolysis using solid oxide electrolyzer cell (SOEC) with La and Cl- doped strontium titanate cathode, Catal. Lett., 149, 1743, 10.1007/s10562-019-02786-8 Zhang, 2014, In situ formation of oxygen vacancy in perovskite Sr0.95Ti0.8Nb0.1M0.1O3 (M = Mn, Cr) toward efficient carbon dioxide electrolysis, Sci. Rep., 4, 7082, 10.1038/srep07082 Gan, 2016, Titanate cathodes with enhanced electrical properties achieved via growing surface Ni particles toward efficient carbon dioxide electrolysis, Phys. Chem. Chem. Phys., 18, 3137, 10.1039/C5CP06742A Yang, 2014, A composite cathode based on scandium doped titanate with enhanced electrocatalytic activity towards direct carbon dioxide electrolysis, Phys. Chem. Chem. Phys., 16, 21417, 10.1039/C4CP02229G Lu, 2017, Efficient CO2 electrolysis with scandium doped titanate cathode, Int. J. Hydrogen Energy, 42, 8197, 10.1016/j.ijhydene.2017.01.182 Li, 2015, Efficient carbon dioxide electrolysis based on perovskite cathode enhanced with nickel nanocatalyst, Electrochim. Acta, 153, 325, 10.1016/j.electacta.2014.11.151 Ye, 2017, Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures, Nat. Commun., 8, 14785, 10.1038/ncomms14785 Yang, 2020, Achieving strong chemical adsorption ability for efficient carbon dioxide electrolysis, Appl. Catal. B Environ., 272, 118968, 10.1016/j.apcatb.2020.118968 Hu, 2020, Iron stabilized 1/3 A-site deficient La–Ti–O perovskite cathodes for efficient CO2 electroreduction, J. Mater. Chem., 8, 21053, 10.1039/D0TA08088H Zhu, 2018, Perovskite SrFeO3−δ decorated with Ni nanoparticles for high temperature carbon dioxide electrolysis, Int. J. Hydrogen Energy, 43, 17040, 10.1016/j.ijhydene.2018.07.148 Patrakeev, 2004, Ion–electron transport in strontium ferrites: relationships with structural features and stability, Solid State Sci., 6, 907, 10.1016/j.solidstatesciences.2004.05.002 Opitz, 2015, Enhancing electrochemical water-splitting kinetics by polarization-driven formation of near-surface iron(0): an in situ XPS study on perovskite-type electrodes, Angew. Chem. Int. Ed., 54, 2628, 10.1002/anie.201409527 Wang, 2013, La0.6Sr0.4Fe0.9Mn0.1O3 oxide cathode for the high temperature CO2 electrolysis using LSGM electrolyte, ECS Transactions, 57, 3171, 10.1149/05701.3171ecst Ishihara, 2017, Highly active oxide cathode of La(Sr)Fe(Mn)O3 for intermediate temperature CO2 and CO2-H2O co-electrolysis using LSGM electrolyte, Solid State Ionics, 299, 60, 10.1016/j.ssi.2016.09.013 Peng, 2020, An efficient symmetrical solid oxide electrolysis cell with LSFM-based electrodes for direct electrolysis of pure CO2, J. CO2 Util., 36, 18, 10.1016/j.jcou.2019.10.017 Liu, 2017, The excellence of La(Sr)Fe(Ni)O3 as an active and efficient cathode for direct CO2 electrochemical reduction at elevated temperatures, J. Mater. Chem., 5, 2673, 10.1039/C6TA09151B Tian, 2018, Direct electrolysis of CO2 in symmetrical solid oxide electrolysis cell based on La0.6Sr0.4Fe0.8Ni0.2O3-δ electrode, J. Electrochem. Soc., 165, F17, 10.1149/2.0351802jes Tian, 2019, Novel quasi-symmetrical solid oxide electrolysis cells with in-situ exsolved cathode for CO2 electrolysis, J. CO2 Util., 31, 43, 10.1016/j.jcou.2019.02.017 Deka, 2019, Production of syngas with controllable H2/CO ratio by high temperature co-electrolysis of CO2 and H2O over Ni and Co- doped lanthanum strontium ferrite perovskite cathodes, Appl. Catal. B Environ., 248, 487, 10.1016/j.apcatb.2019.02.045 Lv, 2020, Atomic-scale insight into exsolution of CoFe alloy nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3 with efficient CO2 electrolysis, Angew. Chem. Int. Ed., 59, 15968, 10.1002/anie.202006536 Darvish, 2016, Thermodynamic stability maps for the La0.6Sr0.4Co0.2Fe0.8O3±δ–CO2–O2 system for application in solid oxide fuel cells, J. Power Sources, 336, 351, 10.1016/j.jpowsour.2016.10.004 Cao, 2016, Efficient electrolysis of CO2 in symmetrical solid oxide electrolysis cell with highly active La0.3Sr0.7Fe0.7Ti0.3O3 electrode material, Electrochem. Commun., 69, 80, 10.1016/j.elecom.2016.06.008 Xu, 2017, Oxide composite of La0.3Sr0.7Ti0.3Fe0.7O3-δ and CeO2 as an active fuel electrode for reversible solid oxide cells, J. Power Sources, 371, 1, 10.1016/j.jpowsour.2017.10.016 Xu, 2017, Electrochemical performance of highly active ceramic symmetrical electrode La0.3Sr0.7Ti0.3Fe0.7O3-δ-CeO2 for reversible solid oxide cells, Electrochim, Acta, 257, 64 Cao, 2020, Insight into high electrochemical activity of reduced La0.3Sr0.7Fe0.7Ti0.3O3 electrode for high temperature CO2 electrolysis, Electrochim. Acta, 332, 135464, 10.1016/j.electacta.2019.135464 Hou, 2020, High-performance La0.3Sr0.7Fe0.9Ti0.1O3-δ as fuel electrode for directly electrolyzing CO2 in solid oxide electrolysis cells, Electrochim, Acta, 342, 136026 Bian, 2018, Highly Efficient, Redox-Stable, La0.5Sr0.5Fe0.9Nb0.1O3-δ symmetric electrode for both solid-oxide fuel cell and H2O/CO2 co-electrolysis operation, J. Electrochem. Soc., 165, F981, 10.1149/2.0961811jes Yang, 2019, Electrochemical reduction of CO2 in a symmetrical solid oxide electrolysis cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ electrode, J. CO2 Util., 33, 445, 10.1016/j.jcou.2019.07.021 Zhou, 2018, Enhancing CO2 electrolysis performance with vanadium-doped perovskite cathode in solid oxide electrolysis cell, Nanomater. Energy, 50, 43, 10.1016/j.nanoen.2018.04.054 Yoon, 2014, Coelectrolysis of steam and CO2 in a solid oxide electrolysis cell with ceramic composite electrodes, Int. J. Hydrogen Energy, 39, 5497, 10.1016/j.ijhydene.2014.01.124 Hu, 2021, Cathode activation process and CO2 electroreduction mechanism on LnFeO3-δ (Ln=La, Pr and Gd) perovskite cathodes, J. Power Sources, 485, 229343, 10.1016/j.jpowsour.2020.229343 Shin, 2015, Oxygen deficient layered double perovskite as an active cathode for CO2 electrolysis using a solid oxide conductor, Faraday Discuss, 182, 227, 10.1039/C5FD00025D Xu, 2017, Roles of reaction kinetics of CO2 on a PrBaCo2O5.5+δ surfaces, RSC Adv., 7, 40558, 10.1039/C7RA06362H Sun, 2016, New opportunity for in situ exsolution of metallic nanoparticles on perovskite parent, Nano Lett., 16, 5303, 10.1021/acs.nanolett.6b02757 Zhu, 2020, Enhancing CO2 catalytic activation and direct electroreduction on in-situ exsolved Fe/MnOx nanoparticles from (Pr,Ba)2Mn2-yFeyO5+δ layered perovskites for SOEC cathodes, Appl. Catal. B Environ., 268, 118389, 10.1016/j.apcatb.2019.118389 Merkulov, 2019, Non-uniform electron conduction in weakly ordered SrFe1-xMoxO3-δ, Dalton Trans., 48, 4530, 10.1039/C9DT00461K Liu, 2010, A novel electrode material for symmetrical SOFCs, Adv. Mater., 22, 5478, 10.1002/adma.201001044 Xiao, 2011, Sr2Fe1.5Mo0.5O6 as cathodes for intermediate-temperature solid oxide fuel cells with La0.8Sr0.2Ga0.87Mg0.13O3 electrolyte, J. Electrochem. Soc., 158, B455, 10.1149/1.3556085 Wang, 2016, Syngas production on a symmetrical solid oxide H 2O/CO2 co-electrolysis cell with Sr2Fe1.5Mo0.5O6 –Sm 0.2Ce0.8O1.9 electrodes, J. Power Sources, 305, 240, 10.1016/j.jpowsour.2015.11.097 Hou, 2019, Enhancing the performance of high-temperature H2O/CO2 co-electrolysis process on the solid oxide Sr2Fe1.6Mo0.5O6-δ-SDC/LSGM/Sr2Fe1.5Mo0.5O6-δ-SDC cell, Electrochim. Acta, 301, 63, 10.1016/j.electacta.2019.01.164 Li, 2017, Mixed-conductor Sr2Fe1.5Mo0.5O6−δ as robust fuel electrode for pure CO2 reduction in solid oxide electrolysis cell, ACS Sustain. Chem. Eng., 5, 11403, 10.1021/acssuschemeng.7b02511 Li, 2018, Highly efficient electrolysis of pure CO2 with symmetrical nanostructured perovskite electrodes, Catal. Sci. Technol., 8, 980, 10.1039/C7CY02324C Lv, 2018, Infiltration of Ce0.8Gd0.2O1.9 nanoparticles on Sr2Fe1.5Mo0.5O6-δ cathode for CO2 electroreduction in solid oxide electrolysis cell, J. Energy Chem., 35, 71, 10.1016/j.jechem.2018.11.002 Xu, 2019, Cu-Doped Sr2Fe1.5Mo0.5O6-δ as a highly active cathode for solid oxide electrolytic cells, Chem. Commun., 55, 8009, 10.1039/C9CC03455B Li, 2017, A novel fuel electrode enabling direct CO2 electrolysis with excellent and stable cell performance, J. Mater. Chem., 5, 20833, 10.1039/C7TA05750D Lv, 2019, In situ exsolved FeNi3 nanoparticles on nickel doped Sr2Fe1.5Mo0.5O6−δ perovskite for efficient electrochemical CO2 reduction reaction, J. Mater. Chem., 7, 11967, 10.1039/C9TA03065D Lv, 2020, In Situ investigation of reversible exsolution/dissolution of CoFe alloy nanoparticles in a Co-doped Sr2Fe1.5Mo0.5O6-δ cathode for CO2 electrolysis, Adv. Mater., 32, 1906193, 10.1002/adma.201906193 Zhu, 2019, Electrochemical conversion of methane to ethylene in a solid oxide electrolyzer, Nat. Commun., 10, 1173, 10.1038/s41467-019-09083-3 Chen, 2020, Sr2Fe1.5+xMo0.5O6-δ cathode with exsolved Fe nanoparticles for enhanced CO2 electrolysis, Int. J. Hydrogen Energy, 45, 11901, 10.1016/j.ijhydene.2020.02.140 Liu, 2011, A novel redox stable catalytically active electrode for solid oxide fuel cells, ECS Transactions, 35, 1357, 10.1149/1.3570122 Liu, 2016, CO2-to-CO conversion on layered perovskite with in situ exsolved Co–Fe alloy nanoparticles: an active and stable cathode for solid oxide electrolysis cells, J. Mater. Chem., 4, 17521, 10.1039/C6TA06365A Park, 2019, In situ exsolved Co nanoparticles on Ruddlesden-Popper material as highly active catalyst for CO2 electrolysis to CO, Appl. Catal. B Environ., 248, 147, 10.1016/j.apcatb.2019.02.013 Park, 2020, A sulfur-tolerant cathode catalyst fabricated with in situ exsolved CoNi alloy nanoparticles anchored on a Ruddlesden–Popper support for CO2 electrolysis, J. Mater. Chem., 8, 138, 10.1039/C9TA07700F Park, 2020, Improving a sulfur-tolerant ruddlesden–popper catalyst by fluorine doping for CO2 electrolysis reaction, ACS Sustain. Chem. Eng., 8, 6564, 10.1021/acssuschemeng.0c01774 Huan, 2021, Ruddlesden–Popper oxide SrEu2Fe2O7 as a promising symmetrical electrode for pure CO2 electrolysis, J. Mater. Chem., 9, 2706, 10.1039/D0TA09585K Wu, 2019, Spinel-based oxide cathode used for high temperature CO2/H2O co-electrolysis, Solid State Ionics, 329, 46, 10.1016/j.ssi.2018.11.008 Zhang, 2019, Direct electrolysis of CO2 in symmetrical solid oxide electrolysis cell with spinel MnCo2O4 electrode, ChemElectroChem, 6, 1359, 10.1002/celc.201801831 Duan, 2020, Exploring Ni(Mn1/3Cr2/3)2O4 spinel-based electrode for solid oxide cell, J. Mater. Chem., 2988