Bioinspired functionally graded gyroid sandwich panel subjected to impulsive loadings

Bobbert, 2017, Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties, Acta Biomater, 53, 572, 10.1016/j.actbio.2017.02.024 Gibson, 1999 Dharmasena, 2010, Dynamic compression of metallic sandwich structures during planar impulsive loading in water, Eur J Mech A Solid, 29, 56, 10.1016/j.euromechsol.2009.05.003 Fleck, 2004, The resistance of clamped sandwich beams to shock loading, J Appl Mech, 71, 386, 10.1115/1.1629109 Deshpande, 2001, Foam topology: bending versus stretching dominated architectures, Acta Mater, 49, 1035, 10.1016/S1359-6454(00)00379-7 Smith, 2011, The quasi-static and blast response of steel lattice structures, J Sandw Struct Mater, 13, 479, 10.1177/1099636210388983 Radford, 2006, The response of clamped sandwich plates with metallic foam cores to simulated blast loading, Int J Solids Struct, 43, 2243, 10.1016/j.ijsolstr.2005.07.006 McShane, 2006, The response of clamped sandwich plates with lattice cores subjected to shock loading, Eur J Mech A Solid, 25, 215, 10.1016/j.euromechsol.2005.08.001 Ashby, 2006, The properties of foams and lattices, Philos Trans A Math Phys Eng Sci, 364, 15, 10.1098/rsta.2005.1678 Melchels, 2010, Mathematically defined tissue engineering scaffold architectures prepared by stereolithography, Biomaterials, 31, 6909, 10.1016/j.biomaterials.2010.05.068 Daynes, 2017, Optimisation of functionally graded lattice structures using isostatic lines, Mater Des, 127, 215, 10.1016/j.matdes.2017.04.082 Llewellyn-Jones, 2016, 3D printed components with ultrasonically arranged microscale structure, Smart Mater. Struct., 25, 10.1088/0964-1726/25/2/02LT01 Liu, 2017, Additive manufacturing-oriented design of graded lattice structures through explicit topology optimization, J Appl Mech, 84, 10.1115/1.4036941 Wang, 2018, Design of graded lattice structure with optimized mesostructures for additive manufacturing, Mater Des, 142, 114, 10.1016/j.matdes.2018.01.011 Cheng, 2019, Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints, Comput Methods Appl Mech Eng, 344, 334, 10.1016/j.cma.2018.10.010 Mahmoud, 2017, Lattice structures and functionally graded materials applications in additive manufacturing of orthopedic implants: a review, J Manuf Mater Proces, 1 Wegst, 2015, Bioinspired structural materials, Nat Mater, 14, 23, 10.1038/nmat4089 Wolff, 2010, The classic: on the inner architecture of bones and its importance for bone growth,, Clin. Orthop. Relat. Res., 468, 1056, 10.1007/s11999-010-1239-2 Apetre, 2006, Low-velocity impact response of sandwich beams with functionally graded core, Int J Solids Struct, 43, 2479, 10.1016/j.ijsolstr.2005.06.003 Abueidda, 2016, Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces, Mech Mater, 95, 102, 10.1016/j.mechmat.2016.01.004 Maskery, 2017, Compressive failure modes and energy absorption in additively manufactured double gyroid lattices, Addit Manuf, 16, 24, 10.1016/j.addma.2017.04.003 Yan, 2014, Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering, J Mater Process Technol, 214, 856, 10.1016/j.jmatprotec.2013.12.004 Yan, 2014, Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting, Mater Des, 55, 533, 10.1016/j.matdes.2013.10.027 Yan, 2015, Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting, J Mech Behav Biomed Mater, 51, 61, 10.1016/j.jmbbm.2015.06.024 Alsalla, 2016, Fracture toughness and tensile strength of 316L stainless steel cellular lattice structures manufactured using the selective laser melting technique, Mater Sci Eng A, 669, 1, 10.1016/j.msea.2016.05.075 Abueidda, 2019, Mechanical properties of 3D printed polymeric Gyroid cellular structures: experimental and finite element study, Mater Des, 165, 10.1016/j.matdes.2019.107597 Li, 2014, On crushing response of the three-dimensional closed-cell foam based on Voronoi model, Mech Mater, 68, 85, 10.1016/j.mechmat.2013.08.009 Zhang, 2016, Dynamic response of functionally graded cellular materials based on the Voronoi model, Compos B Eng, 85, 176, 10.1016/j.compositesb.2015.09.045 Zhang, 2017, Shock enhancement of cellular materials subjected to intensive pulse loading, Shock Waves, 28, 175, 10.1007/s00193-017-0730-z Han, 2018, An overview of materials with triply periodic minimal surfaces and related geometry: from biological structures to self-assembled systems, Adv Mater, 30, 10.1002/adma.201705708 Kapfer, 2011, Minimal surface scaffold designs for tissue engineering, Biomaterials, 32, 6875, 10.1016/j.biomaterials.2011.06.012 Han, 2015, A new type of low density material: shellular, Adv Mater, 27, 5506, 10.1002/adma.201501546 Al-Ketan, 2018, Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials, Addit Manuf, 19, 167, 10.1016/j.addma.2017.12.006 Jung, 2018, Multiscale mechanics of triply periodic minimal surfaces of three-dimensional graphene foams, Nano Lett, 18, 4845, 10.1021/acs.nanolett.8b01431 Yang, 2019, Continuous graded Gyroid cellular structures fabricated by selective laser melting: design, manufacturing and mechanical properties, Mater Des, 162, 394, 10.1016/j.matdes.2018.12.007 Afshar, 2018, Compressive characteristics of radially graded porosity scaffolds architectured with minimal surfaces, Mater Sci Eng C Mater Biol Appl, 92, 254, 10.1016/j.msec.2018.06.051 Shen, 2016, Propagation of the compaction waves in a cellular block with varying cross-section, Int J Solids Struct, 88–89, 319, 10.1016/j.ijsolstr.2016.01.014 Shen, 2013, Double shock mode in graded cellular rod under impact, Int J Solids Struct, 50, 217, 10.1016/j.ijsolstr.2012.09.021 Shen, 2014, Investigation into the behavior of a graded cellular rod under impact, Int J Impact Eng, 74, 92, 10.1016/j.ijimpeng.2014.02.015 Qi, 2019, In-plane crushing response of tetra-chiral honeycombs, Int J Impact Eng, 130, 247, 10.1016/j.ijimpeng.2019.04.019 Li, 2019, Shock loading simulation using density-graded metallic foam projectiles, Mater Des, 164, 10.1016/j.matdes.2018.107546 Bill Lozanovski, Martin Leary, Phuong Tran, Darpan Shidid, Ma Qian, Peter Choong, Milan Brandt, Computational modelling of strut defects in SLM manufactured lattice structures, Materials & Design, Volume 171, 2019, 107671, ISSN 0264-1275, https://doi.org/10.1016/j.matdes.2019.107671. Khai Chau Nguyen, Phuong Tran, Hung Xuan Nguyen, Multi-material topology optimization for additive manufacturing using polytree-based adaptive polygonal finite elements, Automation in Construction, Volume 99, 2019, Pages 79-90, ISSN 0926-5805, https://doi.org/10.1016/j.autcon.2018.12.005. Bill Lozanovski, David Downing, Phuong Tran, Darpan Shidid, Ma Qian, Peter Choong, Milan Brandt, Martin Leary, A Monte Carlo simulation-based approach to realistic modelling of additively manufactured lattice structures, Additive Manufacturing, Volume 32, 2020, 101092, ISSN 2214-8604, https://doi.org/10.1016/j.addma.2020.101092. Tee, 2020, PolyJet 3D Printing of Composite Materials: Experimental and Modelling Approach, JOM, 10.1007/s11837-020-04014-w Phuong Tran, 2017, Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings, Composites Part B: Engineering, 108, 210, 10.1016/j.compositesb.2016.09.083 Maskery, 2018, Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing, Polymer, 152, 62, 10.1016/j.polymer.2017.11.049 Rajagopalan, 2006, Schwarz meets Schwann: design and fabrication of biomorphic and durataxic tissue engineering scaffolds, Med Image Anal, 10, 693, 10.1016/j.media.2006.06.001 Schnering, 1991, Nodal surfaces of Fourier series: fundamental invariants of structured matter, Z Phys B Condens Matter, 83, 407, 10.1007/BF01313411 Johnson, 1983, 541 Johnson, 1985, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng Fract Mech, 21, 31, 10.1016/0013-7944(85)90052-9 Clausen, 2004, Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality, Mater Sci Eng A, 364, 260, 10.1016/j.msea.2003.08.027 Imbalzano, 2016, A numerical study of auxetic composite panels under blast loadings, Compos Struct, 135, 339, 10.1016/j.compstruct.2015.09.038 2011, vol. 13314, 1 2016 Xing, 2019, Modification of residual stresses in laser additive manufactured AlSi10Mg specimens using an ultrasonic peening technique, Materials (Basel), 12, 10.3390/ma12030455 Imbalzano, 2018, Blast resistance of auxetic and honeycomb sandwich panels: comparisons and parametric designs, Compos Struct, 183, 242, 10.1016/j.compstruct.2017.03.018 Institution, 2008 Kmiecik, 2011, Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration, ArchCiv Mech Eng, 11, 623