Dynamic modeling and performance evaluation of a vibrating beam microgyroscope under general support motion

Bhat, 1976, Natural frequencies of a uniform cantilever with a tip mass slender in the axial direction, Journal of Sound and Vibration, 45, 304, 10.1016/0022-460X(76)90606-4 Anderson, 1978, Natural frequencies of a cantilever with an asymmetrically attached tip mass, AIAA Journal, 16, 281, 10.2514/3.7522 Parnell, 1976, Lateral displacement of a vibrating cantilever with a concentrated mass, Journal of Sound and Vibration, 44, 499, 10.1016/0022-460X(76)90092-4 Laura, 1974, A note on the vibrations of a clamped-free beam with a mass at the free end, Journal of Sound and Vibration, 37, 161, 10.1016/S0022-460X(74)80325-1 Gürgöze, 1996, On the eigenfrequencies of a cantilever beam with attached tip mass and a spring mass system, Journal of Sound and Vibration, 190, 149, 10.1006/jsvi.1996.0053 Ho, 1977, Direct path method for flexible multibody spacecraft dynamics, Journal of Spacecraft and Rockets, 14, 102, 10.2514/3.57167 C.S. Bodley, A.D. Devers, A.C. Park, H.P. Frisch, A digital computer for dynamic interaction simulation of controls and structure (DISCOS), NASA Technical Paper, 1978, p. 1219. Barbour, 2001, Inertial sensor technology trends, IEEE Sensors Journal, 1, 332, 10.1109/7361.983473 Yazdi, 1998, Micro-machined inertial sensors, Proceedings of IEEE, 86, 1640, 10.1109/5.704269 A. Shkel, R. Horowitz, A. Seshia, S. Park, R.T. Howe, Dynamics and control of micro-machined gyroscopes, American Control Conference, San Diego, CA, USA, 1999, pp. 2119–2124. A. Shekel, R.T. Howe, R. Horowitz, Modeling and simulation of micromachined gyroscopes in the presence of imperfections, International Conference on Modeling and Simulation of Microsystems, San Juan, Puerto Rico, 1999, pp. 605–608. S. Park, R. Horowitz, Adaptive control for z-axis MEMS gyroscopes, American Control Conference, Arlington, VA, USA, 2001, pp. 496–501. W.A. Clark, Micromachined Vibratory Rate Gyroscope, PhD Dissertation, University of California, Berkeley, 1994. W.O. Davis, Mechanical Analysis of Vibratory Micromachined Gyroscopes, PhD Dissertation, University of California, Berkeley, 2001. S.D. Park, W.K. Chung, Y. Youm, J.W. Lee, Analysis of the motion of a cart with an inverted flexible beam and a concentrated tip mass, Proceedings of Korean Automatic Control Conference (KACC), Pusan, Korea, 1998, 367–372. Fung, 1997, Vibration frequencies of a constrained flexible arm carrying an end mass, Journal of Sound and Vibration, 204, 259, 10.1006/jsvi.1997.0950 Liu, 1988, Free vibration of a restrained beam carrying concentrated masses, Journal of Sound and Vibration, 123, 31, 10.1016/S0022-460X(88)80075-0 Stephen, 1982, Note on the combined use of Dunkerley's and Southwell's method, Journal of Sound and Vibration, 83, 585, 10.1016/S0022-460X(82)80110-7 Park, 2000, Natural frequencies and open-loop responses of an elastic beam fixed on a moving cart and carrying an intermediate lumped mass, Journal of Sound and Vibration, 230, 591, 10.1006/jsvi.1999.2631 Gürgöze, 2002, Comments on a technical note by C.A. Rossi and P.A.A. Laura, Ocean Engineering, 29, 299, 10.1016/S0029-8018(01)00104-4