Performance of sustainable lightweight foam concrete prepared using palm oil fuel ash as a sand replacement

Usman, 2021, Palm oil fuel ash application in cold mix dense-graded bituminous mixture, Constr. Build. Mater., 287, 10.1016/j.conbuildmat.2021.123033 Hamada, 2021, Sustainable use of palm oil fuel ash as a supplementary cementitious material: A comprehensive review, Journal of Building Engineering, 10.1016/j.jobe.2021.102286 Thomas, 2017, Sustainable concrete containing palm oil fuel ash as a supplementary cementitious material–A review, Renew. Sustain. Energy Rev., 80, 550, 10.1016/j.rser.2017.05.128 Shafigh, 2013, Engineering properties of oil palm shell lightweight concrete containing fly ash, Mater. Des., 49, 613, 10.1016/j.matdes.2013.02.004 Mo, 2015, Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete, Mater. Struct., 48, 2545, 10.1617/s11527-014-0336-1 Muthusamy, 2019, Properties of high strength palm oil clinker lightweight concrete containing palm oil fuel ash in tropical climate, Constr. Build. Mater., 199, 163, 10.1016/j.conbuildmat.2018.11.211 Shakir, 2019, Characterization of Palm Oil Fuel Ash as Cementitious Supplement: A Review, ACI Mater. J., 116, 31 Hamada, 2018, The present state of the use of palm oil fuel ash (POFA) in concrete, Constr. Build. Mater., 175, 26, 10.1016/j.conbuildmat.2018.03.227 Chandara, 2010, The effect of unburned carbon in palm oil fuel ash on fluidity of cement pastes containing superplasticizer, Constr. Build. Mater., 24, 1590, 10.1016/j.conbuildmat.2010.02.036 Nagaratnam, 2019, Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete, Constr. Build. Mater., 202, 103, 10.1016/j.conbuildmat.2018.12.139 Alsubari, 2018, Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture waste, Constr. Build. Mater., 167, 44, 10.1016/j.conbuildmat.2018.01.134 Al-Shwaiter, 2020, The influence of superplasticisers on the fresh and mechanical behaviour of foam concrete utilizing pofa as sand replacement, Jurnal Teknologi, 83, 57, 10.11113/jurnalteknologi.v83.14984 Munir, 2015, Utilization of palm oil fuel ash (POFA) in producing lightweight foamed concrete for non-structural building material, Procedia Eng., 125, 739, 10.1016/j.proeng.2015.11.119 Hadi, 2015, The Effect of Oil Palm Ash Incorporation in Foamed Concrete, Jurnal Teknologi, 75, 10.11113/jt.v75.4996 Islam, 2016, Durability properties of sustainable concrete containing high volume palm oil waste materials, J. Cleaner Prod., 137, 167, 10.1016/j.jclepro.2016.07.061 Awang, 2016, Strength of Sieved Only Oil Palm Ash Foamed Concrete, Int. J. Eng. Technol, 8, 354, 10.7763/IJET.2016.V8.912 Muthusamy, 2016, Mechanical properties of oil palm shell lightweight aggregate concrete containing palm oil fuel ash as partial cement replacement, KSCE J. Civ. Eng., 20, 1473, 10.1007/s12205-015-1104-7 Alnahhal, 2021, Synthesis of sustainable lightweight foamed concrete using palm oil fuel ash as a cement replacement material, J. Build. Eng., 35 Zeyad, 2016, Efficiency of treated and untreated palm oil fuel ash as a supplementary binder on engineering and fluid transport properties of high-strength concrete, Constr. Build. Mater., 125, 1066, 10.1016/j.conbuildmat.2016.08.065 Alsubari, 2016, Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concrete, J. Cleaner Prod., 137, 982, 10.1016/j.jclepro.2016.07.133 Parvathy, 2019, Comparative study on synthesis and properties of geopolymer fine aggregate from fly ashes, Constr. Build. Mater., 198, 359, 10.1016/j.conbuildmat.2018.11.231 Alwaeli, 2020, Recycle option for metallurgical sludge waste as a partial replacement for natural sand in mortars containing CSA cement to save the environment and natural resources, J. Hazard. Mater., 398, 10.1016/j.jhazmat.2020.123101 Zhai, 2020, An optimization model of sand and gravel mining quantity considering healthy ecosystem in Yangtze River, China, J. Clean. Product., 242, 10.1016/j.jclepro.2019.118385 Ayyam, 2019, Sand mining and strategies for Its management, 201 Yao, 2019, Quantifying the hydrodynamic impacts of cumulative sand mining on a large river-connected floodplain lake: Poyang Lake, J. Hydrol., 579, 10.1016/j.jhydrol.2019.124156 Barman, 2019, Impact of sand mining on alluvial channel flow characteristics, Ecol. Eng., 135, 36, 10.1016/j.ecoleng.2019.05.013 Zhang, 2020, Toward intelligent construction: Prediction of mechanical properties of manufactured-sand concrete using tree-based models, J. Cleaner Prod., 258, 10.1016/j.jclepro.2020.120665 Ghorbani, 2019, Using statistical analysis and laboratory testing to evaluate the effect of magnetized water on the stability of foaming agents and foam concrete, Constr. Build. Mater., 207, 28, 10.1016/j.conbuildmat.2019.02.098 Jose, 2020, Influence of mixture composition on the properties of foamed concrete, Mater. Today:. Proc. Li, 2020, Preparation and properties of sulphoaluminate cement-based foamed concrete with high performance, Constr. Build. Mater., 263, 10.1016/j.conbuildmat.2020.120945 Hou, 2019, Effect of nanopartic on foaming agent and the foamed concrete, Constr. Build. Mater., 227, 10.1016/j.conbuildmat.2019.116698 Cho, 2021, Rheology and application of buoyant foam concrete for digital fabrication, Compos. B Eng., 215, 10.1016/j.compositesb.2021.108800 Ni, 2020, The potential use of lightweight cellular concrete in pavement application: a review, Int. J. Pavement Res. Technol., 13, 686, 10.1007/s42947-020-6003-8 Koksal, 2020, Influence of expanded vermiculite powder and silica fume on properties of foam concretes, Constr. Build. Mater., 257, 10.1016/j.conbuildmat.2020.119547 Raj, 2019, Physical and functional characteristics of foam concrete: A review, Constr. Build. Mater., 221, 787, 10.1016/j.conbuildmat.2019.06.052 Chica, 2019, Cellular concrete review: New trends for application in construction, Constr. Build. Mater., 200, 637, 10.1016/j.conbuildmat.2018.12.136 Nambiar, 2006, Influence of filler type on the properties of foam concrete, Cem. Concr. Compos., 28, 475, 10.1016/j.cemconcomp.2005.12.001 Qin, 2018, Recycling of raw rice husk to manufacture magnesium oxysulfate cement based lightweight building materials, J. Cleaner Prod., 191, 220, 10.1016/j.jclepro.2018.04.238 Lim, 2013, Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler, Constr. Build. Mater., 46, 39, 10.1016/j.conbuildmat.2013.04.015 She, 2018, Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds, Constr. Build. Mater., 170, 153, 10.1016/j.conbuildmat.2018.02.207 Jones, 2005, A.Utilising unprocessed low-lime coal fly ash in foamed concrete, Fuel, 84, 1398, 10.1016/j.fuel.2004.09.030 Hilal, 2015, On void structure and strength of foamed concrete made without/with additives, Constr. Build. Mater., 85, 157, 10.1016/j.conbuildmat.2015.03.093 Nambiar, 2007, Air-void characterisation of foam concrete, Cem. Concr. Res., 37, 221, 10.1016/j.cemconres.2006.10.009 Yahaya, 2015, Long term investigation on sulphate resistance of aerated concrete containing palm oil fuel ash, ARPN J. Eng. Appl. Sci., 11, 2406 MS EN 197-1, Cement- part 1: Copmposition, specifications, and comformity criteria for common cement, 2014. Ramamurthy, 2009, A classification of studies on properties of foam concrete, Cem. Concr. Compos., 31, 388, 10.1016/j.cemconcomp.2009.04.006 Al-Shwaiter, 2021, The Influence of Superplasticiser on Mechanical, Transport and Microstructure Properties of Foam Concrete, J. King Saud Univers.-Eng. Sci. BS-EN12350-6, Testing Fresh Concrete: Density, 2009. ASTM C157 / C157M, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete. 2007, ASTM. BS-EN-12390-3, Testing concrete -Part 116: Method for determination of compressive strength of concrete cubes. 2009. BS-EN-12390-5, Testing hardened concrete Part 5: Flexural strength of test specimens. 2009. BS-EN-12390-6, Testing hardened concrete Part 6: Tensile splitting strength of test specimens. 2009. BS EN 12504-4, Testing Concrete. Determination of ultrasonic pulse velocity. BSI Standards Publication, 2004. Astm, 2017, E111, Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus, American Society for Testing Materials ASTM C78, Standard test method for flexural strength of concrete (using simple beam with third-point loading). American society for testing and materials, 2010. 100: p. 19428-2959. BS-1881-122, Method for determination of water absorption, in Testing concrete-Part 122. 2011, BSI. Hall, 1989, Water sorptivity of mortars and concretes: a review, Mag. Concr. Res., 41, 51, 10.1680/macr.1989.41.147.51 J. Cabrera, C. Lynsdale, A new gas permeameter for measuring the permeability of mortar and concrete. Magaz. Concr. Res., 1988. 40(144): p. 177-182. H. Grube, C. Lawrence, Permeability of concrete to oxygen. 1984: Cement and Concrete Association. ASTM, C.-a., Standard Test Method for Length Change of Hydroulic-Cement Mortars Exposed to a Sulfate Solution. Annual book of ASTM Standards, Section, 2004: pp. 450-456. Zhutovsky, 2017, Experimental study on physical sulfate salt attack, Mater. Struct./Materiaux et Constructions, 50 Ukpata, 2019, Expansion of CEM I and slag-blended cement mortars exposed to combined chloride-sulphate environments, Cem. Concr. Res., 123, 10.1016/j.cemconres.2019.105794 Jiménez, 2015, Thermal stability of ettringite exposed to atmosphere: Implications for the uptake of harmful ions by cement, Environ. Sci. Technol., 49, 7957, 10.1021/acs.est.5b00536 Abd Elrahman, 2019, Preparation and characterization of ultra-lightweight foamed concrete incorporating lightweight aggregates, Appl. Sci., 9, 1447, 10.3390/app9071447 Chandni, 2018, Utilization of recycled waste as filler in foam concrete, J. Build. Eng., 19, 154, 10.1016/j.jobe.2018.04.032 Oren, 2020, Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate, Constr. Build. Mater., 238, 10.1016/j.conbuildmat.2019.117774 Hajimohammadi, 2018, Enhancing the strength of pre-made foams for foam concrete applications, Cem. Concr. Compos., 87, 164, 10.1016/j.cemconcomp.2017.12.014 Hajimohammadi, 2017, Alkali activated slag foams: the effect of the alkali reaction on foam characteristics, J. Cleaner Prod., 147, 330, 10.1016/j.jclepro.2017.01.134 Zhang, 2020, Effect of silica fume and waste marble powder on the mechanical and durability properties of cellular concrete, Constr. Build. Mater., 241, 10.1016/j.conbuildmat.2019.117980 Hadipramana, J., et al., The energy absorption of modified foamed concrete with rice husk ash subjected to impact loading. 2015. Yang, 2020, Properties of the foam concrete containing waste brick powder derived from construction and demolition waste, J. Build. Eng., 32 Kearsley, 1999 Safiuddin, 2005, Comparison of ASTM saturation techniques for measuring the permeable porosity of concrete, Cem. Concr. Res., 35, 1008, 10.1016/j.cemconres.2004.09.017 Gökçe, 2019, Effect of fly ash and silica fume on hardened properties of foam concrete, Constr. Build. Mater., 194, 1, 10.1016/j.conbuildmat.2018.11.036 Yang, 2021, Preparation and properties of ready-to-use low-density foamed concrete derived from industrial solid wastes, Constr. Build. Mater., 287, 10.1016/j.conbuildmat.2021.122946 Hilal, 2015, On entrained pore size distribution of foamed concrete, Constr. Build. Mater., 75, 227, 10.1016/j.conbuildmat.2014.09.117 Falliano, 2018, Experimental investigation on the compressive strength of foamed concrete: effect of curing conditions, cement type, foaming agent and dry density, Constr. Build. Mater., 165, 735, 10.1016/j.conbuildmat.2017.12.241 Moghaddam, 2019, The effect of fly ash fineness on heat of hydration, microstructure, flow and compressive strength of blended cement pastes, Case Stud. Constr. Mater., 10 Jaturapitakkul, 2011, Filler effect and pozzolanic reaction of ground palm oil fuel ash, Constr. Build. Mater., 25, 4287, 10.1016/j.conbuildmat.2011.04.073 Kroehong, 2011, Effect of palm oil fuel ash fineness on packing effect and pozzolanic reaction of blended cement paste, Procedia Eng., 14, 361, 10.1016/j.proeng.2011.07.045 Zhang, 2019, Concrete gas permeability from different methods: Correlation analysis, Cem. Concr. Compos., 104, 10.1016/j.cemconcomp.2019.103379 Khawaja, 2021, Eco-friendly incorporation of sugarcane bagasse ash as partial replacement of sand in foam concrete. Cleaner, Eng. Technol. Cong, 2015, Properties of a foamed concrete with soil as filler, Constr. Build. Mater., 76, 61, 10.1016/j.conbuildmat.2014.11.066 Zaccardi, 2017, Improved model for capillary absorption in cementitious materials: Progress over the fourth root of time, Cem. Concr. Res., 100, 153, 10.1016/j.cemconres.2017.07.003 Amran, 2015, Properties and applications of foamed concrete; a review, Constr. Build. Mater., 101, 990, 10.1016/j.conbuildmat.2015.10.112 Liu, 2014, Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete, Energy Build., 72, 238, 10.1016/j.enbuild.2013.12.029 Bayraktar, 2021, Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw, Constr. Build. Mater., 302, 10.1016/j.conbuildmat.2021.124229 Kearsley, 2001, Porosity and permeability of foamed concrete, Cem. Concr. Res., 31, 805, 10.1016/S0008-8846(01)00490-2 Miah, 2019, The effect of compressive loading on the residual gas permeability of concrete, Constr. Build. Mater., 217, 12, 10.1016/j.conbuildmat.2019.05.057 Laukaitis, 2006, Acoustical properties of aerated autoclaved concrete, Appl. Acoust., 67, 284, 10.1016/j.apacoust.2005.07.003 Zhang, 2020, Effects of different control methods on the mechanical and thermal properties of ultra-light foamed concrete, Constr. Build. Mater., 262, 10.1016/j.conbuildmat.2020.120082 Lim, 2017, Utilizing high volumes quarry wastes in the production of lightweight foamed concrete, Constr. Build. Mater., 151, 441, 10.1016/j.conbuildmat.2017.06.091 Jones, 2003, Moving fly ash utilization in concrete forward: A UK perspective, 20 N. Aravind D. Sathyan K. Mini Rice husk incorporated foam concrete wall panels as a thermal insulating material in buildings Indoor Built Environ. 2019 p. 1420326X19862017. Mostofinejad, 2020, Durability of concrete containing recycled concrete coarse and fine aggregates and milled waste glass in magnesium sulfate environment, J. Build. Eng., 29 Ranjani, 2012, Behaviour of foam concrete under sulphate environments, Cem. Concr. Compos., 34, 825, 10.1016/j.cemconcomp.2012.03.007 Boudali, 2016, Performance of self-compacting concrete incorporating recycled concrete fines and aggregate exposed to sulphate attack, Constr. Build. Mater., 124, 705, 10.1016/j.conbuildmat.2016.06.058 Łukowski, 2020, Effect of polymer addition on performance of Portland cement mortar exposed to sulphate attack, Materials, 13, 71, 10.3390/ma13010071 El-Hachem, 2012, New procedure to investigate external sulphate attack on cementitious materials, Cem. Concr. Compos., 34, 357, 10.1016/j.cemconcomp.2011.11.010 Irassar, 2009, Sulfate attack on cementitious materials containing limestone filler—A review, Cem. Concr. Res., 39, 241, 10.1016/j.cemconres.2008.11.007 Lorente, 2011, Sulfate transfer through concrete: Migration and diffusion results, Cem. Concr. Compos., 33, 735, 10.1016/j.cemconcomp.2011.05.001 Elahi, 2021, Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review, Constr. Build. Mater., 281, 10.1016/j.conbuildmat.2021.122628 Othman, 2020, Evaluation of the sulphate resistance of foamed concrete containing processed spent bleaching earth, Europ. J. Environ. Civil Eng., 1 Mamun, 2011, Sulphate resistance of fibre reinforced cement-based foams, Constr. Build. Mater., 25, 3427, 10.1016/j.conbuildmat.2011.03.034 Tian, 2000, Does gypsum formation during sulfate attack on concrete lead to expansion?, Cem. Concr. Res., 30, 117, 10.1016/S0008-8846(99)00211-2