Plasma spray deposition of tri-layer environmental barrier coatings

Boyce, 2011 Giampaolo, 2003 Walsh, 2004 Perepezko, 2009, The hotter the engine, the better, Science, 326, 1068, 10.1126/science.1179327 DeMasi-Marcin, 1994, Protective coatings in the gas turbine engine, Surf Coat Technol, 68–69, 1, 10.1016/0257-8972(94)90129-5 Williams, 2003, Progress in structural materials for aerospace systems, Acta Mater, 51, 5775, 10.1016/j.actamat.2003.08.023 McBride, 1996, 84 Schafrik R. Personal Communication; 2008. Evans, 2001, Mechanisms controlling the durability of thermal barrier coatings, Prog Mater Sci, 46, 505, 10.1016/S0079-6425(00)00020-7 Evans, 2007, The mechanics of coating delamination in thermal gradients, Surf Coat Technol, 201, 7905, 10.1016/j.surfcoat.2007.03.029 Zhao, 2010, The influence of coating compliance on the delamination of thermal barrier coatings, Surf Coat Technol, 204, 2432, 10.1016/j.surfcoat.2010.01.018 Begley, 2011, Delamination of ceramic coatings with embedded metal layers, J Am Ceram Soc, 94, s96, 10.1111/j.1551-2916.2011.04436.x Begley, 2012, Delamination resistance of thermal barrier coatings containing embedded ductile layers, Acta Mater, 60, 2497, 10.1016/j.actamat.2011.12.039 Davis, 2006, Some effects of imperfection geometry on the cyclic distortion of thermally grown oxides, Oxid Met, 65, 1, 10.1007/s11085-006-9000-7 Davis, 2006, Effects of bond coat misfit strains on the rumpling of thermally grown oxides, Metall Mater Trans A, 37, 2085, 10.1007/BF02586129 Yu, 2011, The vapor deposition and oxidation of platinum-and yttria-stabilized zirconia multilayers, J Am Ceram Soc, 94, 2671, 10.1111/j.1551-2916.2011.04427.x Krämer, 2006, Thermochemical interaction of thermal barrier coatings with molten CaO–MgO–Al2O3–SiO2 (CMAS) deposits, J Am Ceram Soc, 89, 3167, 10.1111/j.1551-2916.2006.01209.x Krämer, 2008, Infiltration-inhibiting reaction of gadolinium zirconate thermal barrier coatings with CMAS melts, J Am Ceram Soc, 91, 576, 10.1111/j.1551-2916.2007.02175.x Wellman, 2008, Erosion, corrosion and erosion–corrosion of EB PVD thermal barrier coatings, Tribol Int, 41, 657, 10.1016/j.triboint.2007.10.004 Nicholls, 1999, A comparison between the erosion behaviour of thermal spray and electron beam physical vapour deposition thermal barrier coatings, Wear, 233, 352, 10.1016/S0043-1648(99)00214-8 Chen, 2004, Mechanisms governing the high temperature erosion of thermal barrier coatings, Wear, 256, 735, 10.1016/S0043-1648(03)00446-0 Fleck, 2010, The erosion of EB-PVD thermal barrier coatings: the competition between mechanisms, Wear, 268, 1214, 10.1016/j.wear.2009.12.020 Chen, 2003, Foreign object damage in a thermal barrier system: mechanisms and simulations, Mater Sci Eng A, 352, 221 Christin, 2002, Design, fabrication, and application of thermostructural composites (TSC) like C/C, C/SiC, and SiC/SiC composites, Adv Eng Mater, 4, 903, 10.1002/adem.200290001 Igawa, 2005, Fabrication of SiC fiber reinforced SiC composite by chemical vapor infiltration for excellent mechanical properties, J Phys Chem Solids, 66, 551, 10.1016/j.jpcs.2004.06.030 Park, 2008, Fabrication of SiC fiber–SiC matrix composites by reaction sintering, J Kor Ceram Soc, 45, 204, 10.4191/KCERS.2008.45.4.204 Naslain, 2003, SiC-matrix composite materials for advanced jet engines, MRS Bull, 28, 654, 10.1557/mrs2003.193 Evans, 1991, The role of interfaces in fiber-reinforced brittle matrix composites, Compos Sci Technol, 42, 3, 10.1016/0266-3538(91)90010-M Rühle, 1989, High toughness ceramics and ceramic composites, Prog Mater Sci, 33, 85, 10.1016/0079-6425(89)90005-4 Marshall, 1985, Failure mechanisms in ceramic-fiber/ceramic-matrix composites, J Am Ceram Soc, 68, 225, 10.1111/j.1151-2916.1985.tb15313.x Evans, 1989, Overview no. 85 The mechanical behavior of ceramic matrix composites, Acta Metall, 37, 2567, 10.1016/0001-6160(89)90291-5 Wilson, 2001, High performance oxide fibers for metal and ceramic composites, Compos A: Appl Sci Manuf, 32, 1143, 10.1016/S1359-835X(00)00176-7 Wilson, 2008, High temperature properties of Nextel 610 and alumina-based nanocomposite fibers, 609 Wilson, 2008, Nextel™ 650 Ceramic Oxide Fiber: new alumina-based fiber for high temperature composite reinforcement, 363 Zawada, 2003, Characterization and high-temperature mechanical behavior of an oxide/oxide composite, J Am Ceram Soc, 86, 981, 10.1111/j.1151-2916.2003.tb03406.x Tressler, 1999, Recent developments in fibers and interphases for high temperature ceramic matrix composites, Compos A: Appl Sci Manuf, 30, 429, 10.1016/S1359-835X(98)00131-6 Ruggles-Wrenn, 2006, Creep behavior of Nextel™ 610/Monazite/Alumina composite at elevated temperatures, Compos Sci Technol, 66, 2089, 10.1016/j.compscitech.2005.12.026 Levi, 1998, Processing and performance of an all-oxide ceramic composite, J Am Ceram Soc, 81, 2077, 10.1111/j.1151-2916.1998.tb02590.x DiCarlo, 2005, SiC/SiC composites for 1200°C and above, 77 Zhu, 1998, Creep and fatigue behavior in an enhanced SiC/SiC composite at high temperature, J Am Ceram Soc, 81, 2269, 10.1111/j.1151-2916.1998.tb02621.x Morscher, 2008, Tensile creep and fatigue of Sylramic-iBN melt-infiltrated SiC matrix composites: retained properties, damage development, and failure mechanisms, Compos Sci Technol, 68, 3305, 10.1016/j.compscitech.2008.08.028 Yun, 1999, Comparison of the tensile, creep, and rupture strength properties of stoichiometric SiC fibers, 259 Takeda, 1994, High performance silicon carbide fiber Hi-Nicalon for ceramic matrix composites, 37 Costello, 1986, Oxidation kinetics of silicon carbide crystals and ceramics: I. In dry oxygen, J Am Ceram Soc, 69, 674, 10.1111/j.1151-2916.1986.tb07470.x Opila, 2003, Oxidation and volatilization of silica formers in water vapor, J Am Ceram Soc, 86, 1238, 10.1111/j.1151-2916.2003.tb03459.x Opila, 1997, Mass spectrometric identification of Si–O–H(g) species from the reaction of silica with water vapor at atmospheric pressure, J Am Ceram Soc, 80, 1009, 10.1111/j.1151-2916.1997.tb02935.x Opila, 1997, Paralinear oxidation of CVD SiC in water vapor, J Am Ceram Soc, 80, 197, 10.1111/j.1151-2916.1997.tb02810.x Opila, 1999, SiC recession caused by SiO2 scale volatility under combustion conditions: II. Thermodynamics and gaseous-diffusion model, J Am Ceram Soc, 82, 1826, 10.1111/j.1151-2916.1999.tb02005.x Opila, 1999, Variation of the oxidation rate of silicon carbide with water-vapor pressure, J Am Ceram Soc, 82, 625, 10.1111/j.1151-2916.1999.tb01810.x Lee, 1995, New generation of plasma-sprayed mullite coatings on silicon carbide, J Am Ceram Soc, 78, 705, 10.1111/j.1151-2916.1995.tb08236.x Lee, 2000, Key durability issues with mullite-based environmental barrier coatings for Si-based ceramics, J Eng Gas Turbines Power, 122, 632, 10.1115/1.1287584 Lee, 1996, Development and environmental durability of mullite and mullite/YSZ dual layer coatings for SiC and Si3N4 ceramics, Surf Coat Technol, 86–87, 142, 10.1016/S0257-8972(96)03074-5 He, 2003, Simulation of stresses and delamination in a plasma-sprayed thermal barrier system upon thermal cycling, Mater Sci Eng A, 345, 172, 10.1016/S0921-5093(02)00458-6 Evans, 2007, The mechanics of coating delamination in thermal gradients, Surf Coat Technol, 201, 7905, 10.1016/j.surfcoat.2007.03.029 Ambrico, 2001, Stress and shape evolution of irregularities in oxide films on elastic–plastic substrates due to thermal cycling and film growth, Acta Mater, 49, 1577, 10.1016/S1359-6454(01)00059-3 Hsueh, 2002, Thermal stresses in elastic multilayer systems, Thin Solid Films, 418, 182, 10.1016/S0040-6090(02)00699-5 Lee, 2006 Lee, 2005, Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics, Corros Ceram Matrix Compos, 25, 1705 Bondar, 1982, Rare-earth silicates, Ceram Int, 8, 83, 10.1016/0272-8842(82)90022-0 Fukudome, 2002, Development and evaluation of ceramic components for gas turbine Toropov, 1962, Phase diagram of the scandia—silica binary system, Zh Neorg Khim, 7, 1938 Chen, 2010, Hydrothermal synthesis of ytterbium silicate nanoparticles, Inorg Chem, 49, 1942, 10.1021/ic9023585 Stecura, 1960 Zinkevich, 2007, Thermodynamics of rare earth sesquioxides, Prog Mater Sci, 52, 597, 10.1016/j.pmatsci.2006.09.002 Lee, 2003, Upper temperature limit of environmental barrier coatings based on mullite and BSAS, J Am Ceram Soc, 86, 1299, 10.1111/j.1151-2916.2003.tb03466.x Aksaf, 1975, Stable and metastable equilibria in the system SiO2–Al2O3, J Am Ceram Soc, 58, 507, 10.1111/j.1151-2916.1975.tb18770.x Munro, 1997, Evaluated material properties for a sintered alpha-alumina, J Am Ceram Soc, 80, 1919, 10.1111/j.1151-2916.1997.tb03074.x Patnaik, 2002, 344 Hull, 1999 Olesinski, 1984, The C–Si (Carbon–Silicon) system, Bull Alloy Phase Diagrams, 5, 486, 10.1007/BF02872902 Ma, 2005, The thermodynamic assessment of the Ti–Si–N system and the interfacial reaction analysis, J Alloys Compd, 394, 138, 10.1016/j.jallcom.2004.09.027 Lee, 2000, Current status of environmental barrier coatings for Si-based ceramics, Surf Coat Technol, 133–134, 1 Fitzpatrick, 2005 Heinrich, 1966, 1509 Reuter, 1972, The ionization function and its application to the electron probe analysis of thin films, 121 Sumithra, 2004, Role of crystal structure on the thermal expansion of Ln2W3O12 (Ln=La, Nd, Dy, Y, Er and Yb), Solid State Sci, 6, 1313, 10.1016/j.solidstatesciences.2004.07.023 Williamson, 2000, A computational examination of the sources of statistical variance in particle parameters during thermal plasma spraying, Plasma Chem Plasma Process, 20, 299, 10.1023/A:1007088110319 Remesh, 2003, Computational study and experimental comparison of the in-flight particle behavior for an external injection plasma spray process, J Therm Spray Technol, 12, 508, 10.1361/105996303772082251 Remesh, 2003, Influence of process parameters on the deposition footprint in plasma-spray coating, J Therm Spray Technol, 12, 377, 10.1361/105996303770348258 Zhang, 2006, Computer model to simulate the random behaviour of particles in a thermal-spray jet, Surf Coat Technol, 201, 3552, 10.1016/j.surfcoat.2006.08.108 Williamson, 2002, Numerical study of the relative importance of turbulence, particle size and density, and injection parameters on particle behavior during thermal plasma spraying, J Therm Spray Technol, 11, 107, 10.1361/105996302770349041 Dru, 2010, Plasma spraying of lanthanum silicate electrolytes for intermediate temperature solid oxide fuel cells (ITSOFCs), Surf Coat Technol, 205, 1060, 10.1016/j.surfcoat.2010.05.034 Pecharsky, 2008 Di Girolamo, 2010, Microstructural and thermal properties of plasma sprayed mullite coatings, Ceram Int, 36, 1389, 10.1016/j.ceramint.2010.02.007 Bale, 2002, FactSage thermochemical software and databases, Calphad, 26, 189, 10.1016/S0364-5916(02)00035-4 Ramachandran, 2003, 3D modeling of plasma–particle interactions in a plasma jet under dense loading conditions, Thin Solid Films, 435, 298, 10.1016/S0040-6090(03)00335-3 Ramachandran, 2004, Fully coupled 3D modeling of plasma–particle interactions in a plasma jet, Thin Solid Films, 457, 158, 10.1016/j.tsf.2003.12.031 Meillot, 2008, Plasma spraying modeling: particle injection in a time-fluctuating plasma jet, Surf Coat Technol, 202, 4465, 10.1016/j.surfcoat.2008.04.028 Li, 2001, Three-dimensional simulation of a plasma jet with transverse particle and carrier gas injection, Thin Solid Films, 390, 175, 10.1016/S0040-6090(01)00915-4 Xiong, 2004, Three-dimensional simulation of plasma spray: effects of carrier gas flow and particle injection on plasma jet and entrained particle behavior, Int J Heat Mass Transfer, 47, 5189, 10.1016/j.ijheatmasstransfer.2004.07.005 Townsend, 1987, Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrate, J Appl Phys, 62, 4438, 10.1063/1.339082 Hsueh, 2002, Modeling of elastic deformation of multilayers due to residual stresses and external bending, J Appl Phys, 91, 9652, 10.1063/1.1478137 Skinner, 1966, Section 6: thermal expansion, Geol Soc Am Memoirs, 97, 75, 10.1130/MEM97-p75 Sun, 2007, γ-Y2Si2O7, a machinable silicate ceramic: mechanical properties and machinability, J Am Ceram Soc, 90, 2535, 10.1111/j.1551-2916.2007.01803.x Phani, 1987, Elastic modulus-porosity relation in polycrystalline rare-earth oxides, J Am Ceram Soc, 70, C362, 10.1111/j.1151-2916.1987.tb04920.x Desmaison-Brut, 1995, Influence of processing conditions on the microstructure and mechanical properties of sintered yttrium oxides, J Am Ceram Soc, 78, 716, 10.1111/j.1151-2916.1995.tb08238.x Ledbetter, 1998, Elastic properties of mullite, J Am Ceram Soc, 81, 1025, 10.1111/j.1151-2916.1998.tb02441.x Mah, 1983, Mechanical properties of mullite, J Am Ceram Soc, 66, 699, 10.1111/j.1151-2916.1983.tb10532.x Harder, 2009, In situ stress analysis of multilayer environmental barrier coatings, Powder Diffr, 24, 94, 10.1154/1.3120602 Harder, 2009, Residual stress analysis of multilayer environmental barrier coatings, J Am Ceram Soc, 92, 452, 10.1111/j.1551-2916.2008.02888.x Harder, 2010, Transformation kinetics in plasma-sprayed barium- and strontium-doped aluminosilicate (BSAS), Scr Mater, 62, 282, 10.1016/j.scriptamat.2009.11.019 O’Bryan, 1988, Thermal expansion of Y2SiO5 single crystals, J Am Ceram Soc, 71, C42 Kriven, 1983, Solid solution range and microstructures of melt-grown mullite, J Am Ceram Soc, 66, 649, 10.1111/j.1151-2916.1983.tb10615.x Spitsberg IT, Wang H, Heidorn RW. Method for thermally spraying crack-free mullite coatings on ceramic-based substrates. Google Patents; 2001. Shackelford, 2008 Schneider, 1994 McPherson, 1981, The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings, Thin Solid Films, 83, 297, 10.1016/0040-6090(81)90633-7 Deal, 1965, General relationship for the thermal oxidation of silicon, J Appl Phys, 36, 3770, 10.1063/1.1713945