Simplified progressive collapse simulation of RC frame–wall structures
Tóm tắt
Từ khóa
Tài liệu tham khảo
General Services Administration. Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. Washington (DC); 2003.
Department of Defense. Design of buildings to resist progressive collapse. Unified Facilities Criteria. UFC, 4-023-03. Washington (DC); 2005.
Kaewkuchai, 2004, Beam element formulation and solution procedure for dynamic progressive collapse analysis, Comput Struct, 82, 639, 10.1016/j.compstruc.2003.12.001
Grierson, 2005, Progressive-failure analysis of buildings subjected to abnormal loading, Comput-Aided Civ Infrastruct Eng, 20, 155, 10.1111/j.1467-8667.2005.00384.x
Marjanishvili, 2006, Comparison of various procedures for progressive collapse analysis, J Perform Constr Facil, 20, 365, 10.1061/(ASCE)0887-3828(2006)20:4(365)
Bazant, 2007, Mechanics of progressive collapse: learning from world trade center and building demolitions, J Eng Mech, 133, 308, 10.1061/(ASCE)0733-9399(2007)133:3(308)
Kunnath, 1990, Analytical modeling of inelastic seismic response of R/C structures, J Struct Eng, ASCE, 116, 996, 10.1061/(ASCE)0733-9445(1990)116:4(996)
Williams, 1997, Evaluation of seismic damage indices for concrete elements loaded in combined shear and flexure, ACI Struct J, 94, 315
Hindi, 2005, Prediction of damage in R/C shear panels subjected to reversed cyclic loading, J Earthq Eng, 9, 41, 10.1080/13632460509350533
Thomson, 2009, Simplified model for damage in squat RC shear walls, Eng Struct, 31, 2215, 10.1016/j.engstruct.2009.05.020
Martinelli, 2009, Simulation of the shaking table test of seven-story shear wall building, Earthq Eng Struct Dyn, 38, 587, 10.1002/eqe.897
Vulcano, 1992, Macroscopic modeling for nonlinear analysis of RC structural walls, 81
Ghobarah, 1999, Modeling of reinforced concrete structural walls, Eng Struct, 21, 912, 10.1016/S0141-0296(98)00044-3
Orakcal, 2004, Flexural modeling of reinforced concrete walls—model attributes, ACI Struct J, 101, 688
Colotti, 1993, Shear behavior of RC structural walls, ASCE J Struct Eng, 119, 728, 10.1061/(ASCE)0733-9445(1993)119:3(728)
Ayoub, 1998, Nonlinear finite-element analysis of RC shear panels and walls, J Struct Eng, 124, 298, 10.1061/(ASCE)0733-9445(1998)124:3(298)
Massone, 2010, Strength prediction of squat structural walls via calibration of a shear–flexure interaction model, Eng Struct, 32, 922, 10.1016/j.engstruct.2009.12.018
McKenna F, Fenves GL, Scott MH. Open system for earthquake engineering simulation. Berkeley (CA): Univ. of Calif.; 2000.
Bao, 2008, Macromodel-based simulation of progressive collapse: RC frame structures, ASCE J Struct Eng, 134, 1079, 10.1061/(ASCE)0733-9445(2008)134:7(1079)
Kabeyasawa, 1983, Analysis of the full-scale seven-story reinforced concrete test structure, J Fac Eng, XXXVII, 432
Vulcano A, Bertero VV, Colotti V. Analytical modeling of RC structural walls. In: Proceeding, 9th world conference on earthquake engineering, vol. 6. 1988. p. 41–6.
Fischinger, 1992, Nonlinear seismic analysis of structural walls using the multiple-vertical-line-element model, 191
Shen Q, Ghosh SK. Assessing ability of seismic structural systems to withstand progressive collapse: design and progressive collapse analysis of concrete shear wall buildings. Skokie (IL): SK Ghosh and Associates; 2007.
DIANA. Finite element analysis, release 9.2. TNO building and construction research, Delft (The Netherlands); 2007.
Thorenfeldt E, Tomaszewicz A, Jensen JJ. Mechanical properties of high strength concrete and application in design. In: Proceeding, symposium of utilization of high strength concrete. 1987.
Hordijk DA. Local approach to fatigue of concrete. Ph.D. dissertation. Delft (The Netherlands): Delft University of Technology; 1991.
Lowes LN, Mitra N, Altoontash A. A beam–column joint model for simulating the earthquake response of reinforced concrete frames. Technical rep. no. PEER 2003/10. PEER. Berkeley (CA).
Vecchio, 1986, The modified-compression field theory for reinforced-concrete elements subjected to shear, ACI J, 83, 219