Particle angularity effects on the elevated-temperature erosion–oxidation behaviour of aluminium diffusion coatings on 9% Cr steel

Lyczkowski, 2002, Scaling and guidelines for erosion in fluidised beds, Powder Tech., 125, 217, 10.1016/S0032-5910(01)00509-5 R. Viswanathan, W.T. Bakker, Materials for boilers in ultra supercritical power plants, in: Proceedings of International Joint Power Generation Conference 2000, Miami Beach, FL, USA, American Society of Mechanical Engineers, New Yours, USA, Paper 15049, 2000. Shida, 1985, Particle erosion behaviour of boiler tube materials at elevated temperature, Wear, 103, 281, 10.1016/0043-1648(85)90026-2 Levy, 1986, Elevated temperature combined erosion–corrosion of steels, Wear, 110, 117, 10.1016/0043-1648(86)90142-0 Levy, 1986, The effect of temperature on the erosion–corrosion of 9Cr–1Mo steels, Wear, 111, 161, 10.1016/0043-1648(86)90217-6 Levy, 1986, Elevated temperature erosion–corrosion of 9Cr–1Mo steel, Wear, 111, 135, 10.1016/0043-1648(86)90216-4 V.K. Sethi, R.G. Corey, High temperature erosion of alloys in oxidizing environments, in: Proceedings of Seventh International Conference on Erosion by Liquid and Solid Impacts, Cavendish Laboratory, University of Cambridge, Paper 73, 1987. Levy, 1989, Erosion–corrosion of steels in simulated and actual fluidized bed combustor environments, Wear, 131, 85, 10.1016/0043-1648(89)90247-0 Levy, 1989, Erosion–corrosion mechanisms and rates in Fe–Cr steels, Wear, 131, 39, 10.1016/0043-1648(89)90244-5 Olsson, 1995, Erosion–corrosion characteristics of a 2.25Cr–1Mo steel exposed at low particle velocities, Tribol. Int., 28, 107, 10.1016/0301-679X(95)92700-F Huttunen-Saarivirta, 2005, The erosion–corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature, Mater. Corros., 56, 897, 10.1002/maco.200503921 Stringer, 1995, Practical experience with wastage at elevated temperatures in coal combustion systems, Wear, 186/187, 11, 10.1016/0043-1648(95)07189-X Lamarre, 1990, Solutions for solid-particle erosion, Electr. Power Res. Inst. J., 15, 31 E. Huttunen-Saarivirta, F.H. Stott, V. Rohr, M. Schütze, Degradation mechanisms of aluminium diffusion coatings on 12% chromium steels under elevated temperature erosion–oxidation conditions, Mater. High Temp., in press. Lindsey, 1995, The effect of circulating fluidized bed particle characteristics on erosion of 1020 carbon steel, Wear, 188, 33, 10.1016/0043-1648(94)06588-8 Levy, 1989, Effect of particle variables on the erosion–corrosion of 9Cr1Mo steel, Wear, 131, 53, 10.1016/0043-1648(89)90245-7 MacAdam, 1993, Some effects of bed particle properties on wear in fluidized bed combustors, Wear, 169, 141, 10.1016/0043-1648(93)90291-S Geng, 1992, Effect of calcium sulfate particles on corrosion and erosion–corrosion of carbon steel, Wear, 155, 149, 10.1016/0043-1648(92)90115-O Wang, 1991, Erosivity of particles from operating fluidized bed combustors, Wear, 150, 107, 10.1016/0043-1648(91)90309-I Rohr, 2004, Novel low temperature diffusion coatings for heat exchanger materials, Mater. Sci. Forum, 461, 401, 10.4028/www.scientific.net/MSF.461-464.401 Palm, 1997, The Al–Cr–Fe system—phases and phase equilibria in the Al-rich corner, J. Alloys Compd., 252, 192, 10.1016/S0925-8388(96)02719-3 Finnie, 1980, The mechanisms of erosive wear in ductile metals Hirose, 2003, Defect structure of deformed Fe2Al5 intermetallic compound, Intermetallics, 11, 633, 10.1016/S0966-9795(03)00050-5 Tortorelli, 1998, Critical factors affecting the high-temperature corrosion performance of iron aluminides, Mater. Sci. Eng. A, 258, 115, 10.1016/S0921-5093(98)00924-1 Natesan, 1998, Corrosion performance of iron aluminides in mixed-oxidant environments, Mater. Sci. Eng. A, 258, 126, 10.1016/S0921-5093(98)00925-3 Palasamudram, 1997, Particle characterisation for angularity and the effects of particle size and angularity on erosion in a fluidized bed environment, Wear, 203/204, 455, 10.1016/S0043-1648(96)07444-3 Levy, 1983, The effects of erodent composition and shape on the erosion of steel, Wear, 89, 151, 10.1016/0043-1648(83)90240-5 Sundararajan, 1991, An analysis of the erosion–oxidation interaction mechanisms, Wear, 145, 251, 10.1016/0043-1648(91)90135-H Srivasan, 1988, Effect of erodent hardness on erosion of brittle materials, Wear, 128, 139, 10.1016/0043-1648(88)90180-9 Raask, 1969, Tube erosion by ash impaction, Wear, 13, 301, 10.1016/0043-1648(69)90252-X Kang, 1987, Mechanisms in the simultaneous erosion–oxidation attack of nickel and cobalt at high temperature, Met. Trans., 18A, 1785, 10.1007/BF02646210 Rishel, 1991, Some principal mechanisms in the simultaneous erosion and corrosion attack of metals at high temperatures, Mater. Sci. Eng. A, 143, 197, 10.1016/0921-5093(91)90739-A Stack, 1995, Erosion–corrosion regimes: number, nomenclature and justification?, Tribol. Int., 28, 445, 10.1016/0301-679X(95)00009-S