Effect of aggregate and fibre types on ultra-high-performance concrete designed for radiation shielding

2020 Choi, 2019, Agricultural bio-waste for adsorptive removal of crude oil in aqueous solution, J. Mater. Cycles Waste Manag., 21, 356, 10.1007/s10163-018-0797-3 Sharma, 2019, Recycling and utilization of agro-food waste ashes: syntheses of the glasses for wide-band gap semiconductor applications, J. Mater. Cycles Waste Manag., 21, 801, 10.1007/s10163-019-00839-z Ecke, 2002, Treatment-oriented characterization of dry scrubber residue from municipal solid waste incineration, J. Mater. Cycles Waste Manag., 4, 117 Chan, 2017, The development of low cost adsorbents from clay and waste materials: a review, J. Mater. Cycles Waste Manag., 19, 1, 10.1007/s10163-015-0396-5 AbuAlRoos, 2019, Chemistry, Conventional and new lead-free radiation shielding materials for radiation protection in nuclear medicine, A review, 165 Tyagi, 2021, Radiation Shielding Concrete with alternate constituents: an approach to address multiple hazards, J. Hazard Mater., 404, 10.1016/j.jhazmat.2020.124201 Makarious, 1996, On the utilization of heavy concrete for radiation shielding, Ann. Nucl. Energy, 23, 195, 10.1016/0306-4549(95)00021-1 Zorla, 2017, Radiation shielding properties of high performance concrete reinforced with basalt fibers infused with natural and enriched boron, Nucl. Eng. Des., 313, 306, 10.1016/j.nucengdes.2016.12.029 Ouda, 2016, Estimation of radiation properties of high-performance concrete for use in nuclear installations, J. Mater. Civ. Eng., 28, 10.1061/(ASCE)MT.1943-5533.0001638 Mesbahi, 2018, Shielding properties of the ordinary concrete loaded with micro-and nano-particles against neutron and gamma radiations, Appl. Radiat. Isot., 136, 27, 10.1016/j.apradiso.2018.02.004 Hassan, 2015, Studying the effect of nano lead compounds additives on the concrete shielding properties for γ-rays, Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, 360, 81, 10.1016/j.nimb.2015.07.126 Gencel, 2011, Determination and calculation of gamma and neutron shielding characteristics of concretes containing different hematite proportions, Ann. Nucl. Energy, 38, 2719, 10.1016/j.anucene.2011.08.010 Azeez, 2013, The effect of various waste materials' contents on the attenuation level of anti-radiation shielding concrete, Materials, 6, 4836, 10.3390/ma6104836 Akkurt, 2011 Kharita, 2008, Development of special radiation shielding concretes using natural local materials and evaluation of their shielding characteristics, Prog. Nucl. Energy, 50, 33, 10.1016/j.pnucene.2007.10.004 Zayed, 2021, Physical, mechanical, and radiation attenuation properties of serpentine concrete containing boric acid, Construct. Build. Mater., 272, 10.1016/j.conbuildmat.2020.121641 Roslan, 2019, High-density concrete: exploring Ferro boron effects in neutron and gamma radiation shielding, Construct. Build. Mater., 215, 718, 10.1016/j.conbuildmat.2019.04.105 El‐Samrah, 2018, Study characteristics of new concrete mixes and their mechanical, physical, and gamma radiation attenuation features, Z. Anorg. Allg. Chem., 644, 92, 10.1002/zaac.201700420 Amin, 2021, Effect of high temperatures on mechanical, radiation attenuation and microstructure properties of heavyweight geopolymer concrete, Struct. Eng. Mech., 80, 181 Heniegal, 2016, Influence of anti washout admixtures and coarse aggregate types on self-flowing underwater concrete properties, Int. J. Civ. Struct. Eng., 6, 245 Azreen, 2020, Simulation of ultra-high-performance concrete mixed with hematite and barite aggregates using Monte Carlo for dry cask storage, Construct. Build. Mater., 263, 10.1016/j.conbuildmat.2020.120161 Shams, 2018, Investigation of gamma radiation attenuation in heavy concrete shields containing hematite and barite aggregates in multi-layered and mixed forms, Construct. Build. Mater., 182, 35, 10.1016/j.conbuildmat.2018.06.032 Masoud, 2020, Insights into the effect of the mineralogical composition of serpentine aggregates on the radiation attenuation properties of their concretes, Construct. Build. Mater., 263, 10.1016/j.conbuildmat.2020.120141 Oto, 2015, Neutron shielding qualities and gamma ray buildup factors of concretes containing limonite ore, Nucl. Eng. Des., 293, 166, 10.1016/j.nucengdes.2015.07.060 Magbool, 2021, The effect of various steel fibers and volcanic pumice powder on fracture characteristics of Self-Compacting concrete, Construct. Build. Mater., 312, 10.1016/j.conbuildmat.2021.125444 Zeyad, 2020, Effect of fibers types on fresh properties and flexural toughness of self-compacting concrete, J. Mater. Res. Technol., 9, 4147, 10.1016/j.jmrt.2020.02.042 Abdullah, 2022, The effect of openings on the performance of self-compacting concrete with volcanic pumice powder and different steel fibers, Case Stud. Constr. Mater., 17 Maslehuddin, 2013, Radiation shielding properties of concrete with electric arc furnace slag aggregates and steel shots, Ann. Nucl. Energy, 53, 192, 10.1016/j.anucene.2012.09.006 Sharma, 2009, Experimental investigations on mechanical and radiation shielding properties of hybrid lead–steel fiber reinforced concrete, Nucl. Eng. Des., 239, 1180, 10.1016/j.nucengdes.2009.02.017 Li, 2017, Radiation shielding property of structural polymer composite: continuous basalt fiber reinforced epoxy matrix composite containing erbium oxide, Compos. Sci. Technol., 143, 67, 10.1016/j.compscitech.2017.03.002 Başyigit, 2010, Prediction of compressive strength of heavyweight concrete by ANN and FL models, Neural Comput. Appl., 19, 507, 10.1007/s00521-009-0292-9 Mahdy, 2002, 5 Ouda, 2015, Development of high-performance heavy density concrete using different aggregates for gamma-ray shielding, Prog. Nucl. Energy, 79, 48, 10.1016/j.pnucene.2014.11.009 Verdipoor, 2018, Photon mass attenuation coefficients of a silicon resin loaded with WO3, PbO, and Bi2O3 Micro and Nano-particles for radiation shielding, Radiat. Phys. Chem., 147, 85, 10.1016/j.radphyschem.2018.02.017 Kadik, 2020, Glass powder admixture effect on the dynamic properties of concrete, multi-excitation method, Struct. Eng. Mech., 74, 671 Mohammed, 2014, Improving the engineering and fluid transport properties of ultra-high strength concrete utilizing ultrafine palm oil fuel ash, J. Adv. Concr. Technol., 12, 127, 10.3151/jact.12.127 Agwa, 2022, Effect of different burning degrees of sugarcane leaf ash on the properties of ultrahigh-strength concrete, J. Build. Eng., 56 Khan, 2020, Shielding performance of heavy-weight ultra-high-performance concrete against nuclear radiation, Prog. Nucl. Energy, 130, 10.1016/j.pnucene.2020.103550 Amin, 2022, Effect of ferrosilicon and silica fume on mechanical, durability, and microstructure characteristics of ultra high-performance concrete, Construct. Build. Mater., 320, 10.1016/j.conbuildmat.2021.126233 Han, 2022, Preparation and comprehensive properties of a high-radiation-shielding UHPC by using magnetite fine aggregate, Materials, 15, 978, 10.3390/ma15030978 Amin, 2021, Effects of nano cotton stalk and palm leaf ashes on ultrahigh-performance concrete properties incorporating recycled concrete aggregates, Construct. Build. Mater., 302, 10.1016/j.conbuildmat.2021.124196 Tufekci, 2018, Development of heavyweight high performance fiber reinforced cementitious composites (HPFRCC)–Part II: X-ray and gamma radiation shielding properties, Construct. Build. Mater., 163, 326, 10.1016/j.conbuildmat.2017.12.086 Ding, 2021, Preparation of heavyweight ultra-high performance concrete using barite sand and Titanium-rich heavy slag sand, J. Wuhan Univ. Technol.-Materials Sci. Ed., 36, 644, 10.1007/s11595-021-2456-0 2011 2010 Yu, 2014, Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC), Cement Concr. Res., 56, 29, 10.1016/j.cemconres.2013.11.002 Azreen, 2018, Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass, Construct. Build. Mater., 172, 370, 10.1016/j.conbuildmat.2018.03.243 Topçu, 2003, Properties of heavyweight concrete produced with barite, Cement Concr. Res., 33, 815, 10.1016/S0008-8846(02)01063-3 Khalaf, 2019, The constituents, properties and application of heavyweight concrete: a review, Construct. Build. Mater., 215, 73, 10.1016/j.conbuildmat.2019.04.146 H.C.-W. Admixture, Nonchloride, Noncorrosive, Accelerating Admixture Complying with ASTM C 494/C 494M, Type C, and Recommended by Manufacturer for Use in Masonry Mortar of Composition Indicated 1. Shi, 2015, A review on ultra high performance concrete: Part I. Raw materials and mixture design, Construct. Build. Mater., 101, 741, 10.1016/j.conbuildmat.2015.10.088 2015 2003 2013 Naderi, 2021, Experimental study of the effect of aggregate type on concrete strength and permeability, J. Build. Eng., 37 2009 2010 s.t.a. at, 2007, Recommendation of RILEM TC 200-HTC: mechanical concrete properties at high temperatures—modelling and applications: Part 1, Introduction—General presentation, Materials and Structures, 40, 841 Amin, 2021, Effects of nano cotton stalk and palm leaf ashes on ultrahigh-performance concrete properties incorporating recycled concrete aggregates, Construct. Build. Mater., 302, 10.1016/j.conbuildmat.2021.124196 Amin, 2021, Engineering properties of self-cured normal and high strength concrete produced using polyethylene glycol and porous ceramic waste as coarse aggregate, Construct. Build. Mater., 299, 10.1016/j.conbuildmat.2021.124243 Agwa, 2022, Effect of different burning degrees of sugarcane leaf ash on the properties of ultrahigh-strength concrete, J. Build. Eng., 10.1016/j.jobe.2022.104773 Bouarroudj, 2019, Use of a reference limestone fine aggregate to study the fresh and hard behavior of mortar made with recycled fine aggregate, Mater. Struct., 52, 1, 10.1617/s11527-019-1325-1 Li, 2019, Effects of geometry and fraction of polypropylene fibers on permeability of ultra-high performance concrete after heat exposure, Cement Concr. Res., 116, 168, 10.1016/j.cemconres.2018.11.009 Horszczaruk, 2015, Mechanical properties of shielding concrete with magnetite aggregate subjected to high temperature, Procedia Eng., 108, 39, 10.1016/j.proeng.2015.06.117 Nadeem, 2012, Experimental investigation of using slag as an alternative to normal aggregates (coarse and fine) in concrete, Int. J. Civ. Struct. Eng., 3, 117 Saad, 2020, Improving the brittle behavior of high strength concrete using banana and palm leaf sheath fibers, Mech. Adv. Mater. Struct., 1 Abdelsamie1a, 2021, Improving the brittle behaviour of high-strength concrete using keratin and glass fibres, ADVANCES IN CONCRETE CONSTRUCTION, 12, 469 Amin, 2022, Influence of recycled aggregates and carbon nanofibres on properties of ultra-high-performance concrete under elevated temperatures, Case Stud. Constr. Mater. Amin, 2020, Investigating the mechanical and microstructure properties of fibre-reinforced lightweight concrete under elevated temperatures, Case Stud. Constr. Mater., 13 Thomas, 2019, Effect of elevated temperature on the mechanical properties and microstructure of heavy-weight magnetite concrete with steel fibers, Cement Concr. Compos., 103, 80, 10.1016/j.cemconcomp.2019.04.029 Xu, 2001, Impact of high temperature on PFA concrete, 31, 1065 Khoury, 1992, Compressive strength of concrete at high temperatures: a reassessment, Mag. Concr. Res., 44, 291, 10.1680/macr.1992.44.161.291 Georgali, 2005, Microstructure of fire-damaged concrete. A case study, Cement Concr. Compos., 27, 255, 10.1016/j.cemconcomp.2004.02.022 Ergün, 2013, The effect of cement dosage on mechanical properties of concrete exposed to high temperatures, Fire Saf. J., 55, 160, 10.1016/j.firesaf.2012.10.016 Yüzer, 2004, Compressive strength–color change relation in mortars at high temperature, Cement Concr. Res., 34, 1803, 10.1016/j.cemconres.2004.01.015 Horszczaruk, 2019, Investigation of gamma ray shielding efficiency and physicomechanical performances of heavyweight concrete subjected to high temperature, Construct. Build. Mater., 195, 574, 10.1016/j.conbuildmat.2018.09.113 Monte, 2014, Thermo-mechanical behavior of baritic concrete exposed to high temperature, Cement Concr. Compos., 53, 305, 10.1016/j.cemconcomp.2014.07.009 Ashkezari, 2020, Thermal and mechanical evaluation of ultra-high performance fiber-reinforced concrete and conventional concrete subjected to high temperatures, J. Build. Eng., 32 Shin, 2011 Nikbin, 2020, Effect of high temperature on the radiation shielding properties of cementitious composites containing nano-Bi2O3, J. Mater. Res. Technol., 9, 11135, 10.1016/j.jmrt.2020.08.018 Rashid, 2020, Effect of elevated temperature to radiation shielding of ultra-high performance concrete with silica sand or magnetite, Construct. Build. Mater., 262, 10.1016/j.conbuildmat.2020.120567