Revisiting the designing criteria of advanced solid electrolyte interphase on lithium metal anode under practical condition

Xu, 2014, Lithium metal anodes for rechargeable batteries, Energy Environ. Sci., 7, 513, 10.1039/C3EE40795K Zheng, 2020, Regulating electrodeposition morphology of lithium: towards commercially relevant secondary Li metal batteries, Chem. Soc. Rev., 49, 2701, 10.1039/C9CS00883G Louli, 2020, Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis, Nat. Energy, 5, 693, 10.1038/s41560-020-0668-8 Ren, 2019, Enabling high-voltage lithium-metal batteries under practical conditions, Joule, 3, 1662, 10.1016/j.joule.2019.05.006 Yuan, 2020, Salt-rich solid electrolyte interphase for safer high-energy-density Li metal batteries with limited Li excess, Chem. Commun., 56, 8257, 10.1039/D0CC02481C Wang, 2020, Topological design of ultrastrong MXene paper hosted Li enables ultrathin and fully flexible lithium metal batteries, Nano Energy, 74, 10.1016/j.nanoen.2020.104817 Xu, 2020, Air‐stable and dendrite‐free lithium metal anodes enabled by a hybrid interphase of C60 and Mg, Adv. Energy Mater., 10, 10.1002/aenm.201903292 Yuan, 2019, A versatile single-ion electrolyte with a Grotthuss-like Li conduction mechanism for dendrite-free Li metal batteries, Energy Environ. Sci., 12, 2741, 10.1039/C9EE01473J Yue, 2019, Wettable carbon felt framework for high loading Li-metal composite anode, Nano Energy, 60, 257, 10.1016/j.nanoen.2019.03.057 Zhao, 2018, Carbon paper interlayers: a universal and effective approach for highly stable Li metal anodes, Nano Energy, 43, 368, 10.1016/j.nanoen.2017.11.032 Bae, 2019, Polar polymer–solvent interaction derived favorable interphase for stable lithium metal batteries, Energy Environ. Sci., 12, 3319, 10.1039/C9EE02558H Gao, 2020, Multifunctional silanization interface for high‐energy and low‐gassing lithium metal pouch cells, Adv. Energy Mater., 10, 10.1002/aenm.201903362 Chi, 2017, Prestoring lithium into stable 3D nickel foam host as dendrite-free lithium metal anode, Adv. Funct. Mater., 27, 10.1002/adfm.201700348 Liu, 2018, Ladderlike carbon nanoarrays on 3D conducting skeletons enable uniform lithium nucleation for stable lithium metal anodes, Chem. Commun., 54, 5330, 10.1039/C8CC02672F Yuan, 2019, Dual lithiophilic structure for uniform Li deposition, ACS Appl. Mater. Interfaces, 11, 10616, 10.1021/acsami.8b19654 Wang, 2021, Lithiophilic 3D SnS2@carbon fiber cloth for stable Li metal anode, Acta Phys. Chim. Sin., 37 Qian, 2015, High rate and stable cycling of lithium metal anode, Nat. Commun., 6, 6362, 10.1038/ncomms7362 Alvarado, 2019, Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes, Energy Environ. Sci., 12, 780, 10.1039/C8EE02601G Fan, 2018, Highly fluorinated interphases enable high-voltage Li-metal batteries, Chem, 4, 174, 10.1016/j.chempr.2017.10.017 Yang, 2020, Liquefied gas electrolytes for wide-temperature lithium metal batteries, Energy Environ. Sci., 13, 2209, 10.1039/D0EE01446J Ren, 2018, Localized high-concentration sulfone electrolytes for high-efficiency lithium-metal batteries, Chem, 4, 1877, 10.1016/j.chempr.2018.05.002 Chen, 2018, High-voltage lithium-metal batteries enabled by localized high-concentration electrolytes, Adv. Mater., 30 Fan, 2018, Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries, Nat. Nanotechnol., 13, 715, 10.1038/s41565-018-0183-2 Wang, 2020, Glassy Li metal anode for high-performance rechargeable Li batteries, Nat. Mater., 19, 1339, 10.1038/s41563-020-0729-1 Yu, 2020, Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries, Nat. Energy, 5, 526, 10.1038/s41560-020-0634-5 Chang, 2020, A liquid electrolyte with de-solvated lithium ions for lithium-metal battery, Joule, 4, 1776, 10.1016/j.joule.2020.06.011 Zhang, 2020, Colossal granular lithium deposits enabled by the grain‐coarsening effect for high‐efficiency lithium metal full batteries, Adv. Mater., 32 Zhang, 2020, A sustainable solid electrolyte interphase for high‐energy‐density lithium metal batteries under practical conditions, Angew. Chem. Int. Ed., 59, 3252, 10.1002/anie.201911724 Hwang, 2019, Customizing a Li–metal battery that survives practical operating conditions for electric vehicle applications, Energy Environ. Sci., 12, 2174, 10.1039/C9EE00716D Yu, 2020, Flame-retardant concentrated electrolyte enabling a LiF-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries, J. Energy Chem., 51, 154, 10.1016/j.jechem.2020.03.034 Zhang, 2018, Highly stable lithium metal batteries enabled by regulating the solvation of lithium ions in nonaqueous electrolytes, Angew. Chem. Int. Ed., 57, 5301, 10.1002/anie.201801513 Markevich, 2017, Very stable lithium metal stripping–plating at a high rate and high areal capacity in fluoroethylene carbonate-based organic electrolyte solution, ACS Energy Lett., 2, 1321, 10.1021/acsenergylett.7b00300 Zhao, 2019, Stable Li metal anode by a polyvinyl alcohol protection layer via modifying solid-electrolyte interphase layer, Nano Energy, 64, 10.1016/j.nanoen.2019.103893 Masias, 2019, Elastic, plastic, and creep mechanical properties of lithium metal, J. Mater. Sci., 54, 2585, 10.1007/s10853-018-2971-3 Shen, 2020, The failure of solid electrolyte interphase on Li metal anode: structural uniformity or mechanical strength, Adv. Energy Mater., 10 Lee, 2020, Fluorine-incorporated interface enhances cycling stability of lithium metal batteries with Ni-rich NCM cathodes, Nano Energy, 67, 10.1016/j.nanoen.2019.104309 Liu, 2017, Theoretical studies of the reduction of cyclic esters on the anode interface of lithium batteries, J. Electrochem. Soc., 164, A3144, 10.1149/2.0951713jes Zhang, 2020, Engineering solid electrolyte interphase composition by assessing decomposition pathways of fluorinated organic solvents in lithium metal batteries, J. Electrochem. Soc., 167 Liu, 2020, A LiPO2F2/LiPF6 dual-salt electrolyte enabled stable cycling performance of nickel-rich lithium ion batteries, RSC Adv., 10, 1704, 10.1039/C9RA09841K Huang, 2020, Resolving nanoscopic and mesoscopic heterogeneity of fluorinated species in battery solid-electrolyte interphases by cryogenic electron microscopy, ACS Energy Lett., 5, 1128, 10.1021/acsenergylett.0c00194 Adams, 2018, Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries, Adv. Energy Mater., 8, 10.1002/aenm.201702097 Xue, 2020, FSI-inspired solvent and “full fluorosulfonyl” electrolyte for 4 V class lithium-metal batteries, Energy Environ. Sci., 13, 212, 10.1039/C9EE02538C