Contribution of ultrasonic traveling wave to chemical–mechanical polishing

Markus Forsberg. Chemical Mechanical Polishing of Silicon and Silicon Dioxide in Front End Processing. Acta Universitatis Upsaliensis Uppsala, 2004. Oliver, 2004 Dejule, 1997, CMP challenge below a quarter micron, Semicond. Int., 20, 54 Shi, 1998, Modeling of chemical–mechanical polishing with soft pads, Appl. Phys. A, 67, 249, 10.1007/s003390050766 Kuo, 2001, Superior chemical–mechanical polishing performance of silica slurry made of surface-active siloxane/acrylic polymers, Colloid Polym. Sci., 279, 1212, 10.1007/s003960100579 Preston, 1927, The theory and design of plate glass polishing machine, J. Soc. Glass Technol., 11, 214 Nguyen, 2000, Modeling of the removal rate in chemical mechanical polishing, Proc. SPIE Int. Soc. Opt. Eng., 4181, 161 Fu, 2001, A Plasticity-based model of material removal in chemical–mechanical polishing (CMP), IEEE Trans. Semicond. Manuf., 14, 406, 10.1109/66.964328 Luo, 2003, Effects of abrasive size distribution in chemical mechanical planarization–modeling and verification, IEEE Trans. Semicond. Manuf., 16, 469, 10.1109/TSM.2003.815199 Runnels, 1998, Modeling tool for chemical–mechanical polishing design and evaluation, IEEE Trans. Semicond. Manuf., 11, 501, 10.1109/66.705385 Litton, 2001, Modeling of hydrophilic wafer bonding by molecular dynamics simulations, J. Appl. Phys., 89, 6013, 10.1063/1.1351538 Kasai, 2008, Physics and tribology of chemical mechanical planarization, J. Phys.: Condens. Matter, 20 Park, 2007, Effects of pad properties on material removal in chemical mechanical polishing, J. Mater. Process. Technol., 187–188, 73, 10.1016/j.jmatprotec.2006.11.216 Steigerwald, 1997 Thoe, 1988, Review on ultrasonic machining, Int. J. Mech. Tools Manuf., 38, 239, 10.1016/S0890-6955(97)00036-9 Pei, 1995, Rotary ultrasonic machining of structural ceramics – a review, Ceram. Eng. Sci. Proc., 16, 259, 10.1002/9780470314616.ch37 Legge, 1966, Machining without abrasive slurry, Ultrasonic, 4, 157, 10.1016/0041-624X(66)90123-5 Legge, 1964, Ultrasonic drilling of ceramics, Ind. Diamond Rev., 24, 20 Ishikawa, 1998, A study on combined vibration drilling by ultrasonic and low-frequency vibrations for hard and brittle materials, Prec. Eng., 22, 196, 10.1016/S0141-6359(98)00014-2 Per, 1995, Rotary ultrasonic machining for face milling of ceramics, Int. J. Mach. Tool Manuf., 35, 1033, 10.1016/0890-6955(94)00100-X Rajurkar, 1999, Micro removal of ceramic material (Al203) in the precision ultrasonic machining, Prec. Eng., 23, 73, 10.1016/S0141-6359(98)00026-9 Tsain, 2012, Combined ultrasonic vibration and chemical mechanical polishing of copper substrates, Int. J. Mach. Tools Manuf, 53, 69, 10.1016/j.ijmachtools.2011.09.009 Xu, 2010, Ultrasonic flexural vibration assisted chemical mechanical polishing for sapphire substrate, Appl. Surf. Sci., 256, 3936, 10.1016/j.apsusc.2010.01.053 Tso, 2010, Study on chemical mechanical polishing with ultrasonic vibration, Adv. Mater. Res., 126–128, 311, 10.4028/www.scientific.net/AMR.126-128.311 Suzuki, 2010, Ultraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing, CIRP Annals – Manuf. Technol., 59, 347, 10.1016/j.cirp.2010.03.117 McGrath, 2004, Polishing pad surface characterisation in chemical mechanical planarisation, J. Mater. Process. Technol., 153–154, 666, 10.1016/j.jmatprotec.2004.04.094