Recent advances in potassium-based adsorbents for CO2 capture and separation: a review

Aaron, 2005, Separation of CO2 from flue gas: a review, Sep. Sci. Technol., 40, 321, 10.1081/SS-200042244 Adanez, 2012, Progress in chemical-looping combustion and reforming technologies, Prog. Energy Combust. Sci., 38, 215, 10.1016/j.pecs.2011.09.001 Amiri, 2018, Optimization of CO2 capture from simulated flue gas using K2CO3/Al2O3 in a Micro fluidized bed reactor, Energy Fuels, 32, 7978, 10.1021/acs.energyfuels.8b00789 An, 2020, Cu (II) and As (V) Adsorption Kinetic Characteristic of the Multifunctional Amino Groups in Chitosan, Processes, 8, 1194, 10.3390/pr8091194 Arellano-Treviño, 2019, Catalysts and adsorbents for CO2 capture and conversion with dual function materials: Limitations of Ni-containing DFMs for flue gas applications, J. CO2 Util., 31, 143, 10.1016/j.jcou.2019.03.009 Balsamo, 2016, Carbon Dioxide Capture from Model Marine Diesel Engine Exhaust by means of K2CO3-Based Sorbents, Chemical Engineering Transactions, 52, 415 Bararpour, 2020, Application of Core-Shell-Structured K2CO3-Based Sorbents in Postcombustion CO2 Capture: Statistical Analysis and Optimization Using Response Surface Methodology, Energy Fuels, 34, 3429, 10.1021/acs.energyfuels.9b03442 Bararpour, 2018, Post-combustion CO2 capture using supported K2CO3: Comparing physical mixing and incipient wetness impregnation preparation methods, Chem. Eng. Res. Des., 137, 319, 10.1016/j.cherd.2018.07.027 Bararpour, 2019, Investigation of the effect of alumina-aerogel support on the CO2 capture performance of K2CO3, Fuel, 242, 124, 10.1016/j.fuel.2018.12.123 BITTER, 2019, Direct CO2 capture from air-What is the best sorbent? Boonprasop, 2019, CO2 sorption and sorbent depressurized regeneration in circulating-turbulent fluidized bed regime, J. Environ. Chem. Eng., 7, 10.1016/j.jece.2019.102928 Bu, 2017, Oxy-fuel conversion of sub-bituminous coal particles in fluidized bed and pulverized combustors, Proc. Combust. Inst., 36, 3331, 10.1016/j.proci.2016.08.075 Bu, 2014, Ignition behavior of single coal particle in a fluidized bed under O2/CO2 and O2/N2 atmospheres: a combination of visual image and particle temperature, Appl. Energy, 115, 301, 10.1016/j.apenergy.2013.10.040 Buhre, 2005, Oxy-fuel combustion technology for coal-fired power generation, Prog. Energy Combust. Sci., 31, 283, 10.1016/j.pecs.2005.07.001 Bui, 2018, Carbon capture and storage (CCS): the way forward, Energy Environ. Sci., 11, 1062, 10.1039/C7EE02342A Byun, 2016, Novel method for investigation of a K–Mg-based CO2 sorbent for sorption-enhanced water–gas shift reaction, Renew. Energy, 87, 415, 10.1016/j.renene.2015.10.020 Chae, 2016, Potassium-based dry sorbents for removal of sulfur dioxide at low temperatures, J. Ind. Eng. Chem., 36, 35, 10.1016/j.jiec.2016.02.020 Chai, 2020, Effect of CO2 adsorbents on the Ni-based dual-function materials for CO2 capturing and in situ methanation, J. Chin. Chem. Soc., 67, 998, 10.1002/jccs.202000086 Chaiwang, 2016, Thermogravimetric analysis and chemical kinetics for regeneration of sodium and potassium carbonate solid sorbents, Chem. Eng. Commun., 203, 581, 10.1080/00986445.2015.1078796 Chaiwang, 2019, Carbon Dioxide Capture from Flue Gas Using a Potassium-Based Sorbent in a Circulating-Turbulent Fluidized Bed, Eng. J., 23, 13, 10.4186/ej.2019.23.5.13 Charoenchaipet, 2020, Development of CO2 capture capacity by using impregnation method in base condition for K2CO3/Al2O3, Energy Rep, 6, 25, 10.1016/j.egyr.2019.11.037 Chioyama, 2015, Temperature-Dependent Double-Step CO2 Occlusion of K2CO3 under Moist Conditions, Adsorpt. Sci. Technol., 33, 243, 10.1260/0263-6174.33.3.243 Cho, 2019, Optimum design and characteristics of potassium-based sorbents using SiO2 for post-combustion CO2 capture, Renew. Energy, 144, 107, 10.1016/j.renene.2018.10.057 Cho, 2018, Characterization of new potassium-based solid sorbents prepared using metal silicates for post-combustion CO2 capture, Process Saf. Environ. Prot., 117, 296, 10.1016/j.psep.2018.05.010 Cho, 2016, Preparation and performance of potassium-based sorbent using SnO2 for post-combustion CO2 capture, Adsorption, 22, 1119, 10.1007/s10450-016-9835-4 Choi, 2009, Adsorbent materials for carbon dioxide capture from large anthropogenic point sources, ChemSusChem: Chemistry & Sustainability Energy & Materials, 2, 796, 10.1002/cssc.200900036 Choi, 2011, Amine-tethered solid adsorbents coupling high adsorption capacity and regenerability for CO2 capture from ambient air, ChemSusChem, 4, 628, 10.1002/cssc.201000355 Derevschikov, 2014, Direct CO2 capture from ambient air using K2CO3/Y2O3 composite sorbent, Fuel, 127, 212, 10.1016/j.fuel.2013.09.060 Dong, 2021, China's Carbon Neutrality Policy: Objectives, Impacts and Paths, East Asian Policy, 13, 5, 10.1142/S1793930521000015 Dong, 2015, Na2CO3/MgO/Al2O3 Solid Sorbents for Low-Temperature CO2 Capture, Energy Fuels, 29, 968, 10.1021/ef502400s Duan, 2012, Ab initio thermodynamic study of the CO2 capture properties of potassium carbonate sesquihydrate, K2CO3•1.5H2O, J. Phys. Chem. C, 116, 14461, 10.1021/jp303844t Duan, 2010, CO2 capture properties of alkaline earth metal oxides and hydroxides: A combined density functional theory and lattice phonon dynamics study, J. Chem. Phys., 133, 10.1063/1.3473043 Duan, 2011, CO2 capture properties of M–C–O–H (M= Li, Na, K) systems: a combined density functional theory and lattice phonon dynamics study, J. Solid State Chem., 184, 304, 10.1016/j.jssc.2010.12.005 Durán-Guevara, 2015, Potassium-based sorbents using mesostructured γ-alumina supports for low temperature CO2 capture, Ceram. Int., 41, 3036, 10.1016/j.ceramint.2014.10.140 Duyar, 2015, Dual function materials for CO2 capture and conversion using renewable H2, Appl. Catal. B-Environ., 168, 370, 10.1016/j.apcatb.2014.12.025 Duyar, 2016, CO2 utilization with a novel dual function material (DFM) for capture and catalytic conversion to synthetic natural gas: An update, J. CO2 Util., 15, 65, 10.1016/j.jcou.2016.05.003 Esmaili, 2013, Study on the effect of preparation parameters of K2CO3/Al2O3 sorbent on CO2 capture capacity at flue gas operating conditions, Journal of Encapsulation and Adsorption Sciences, 3, 57, 10.4236/jeas.2013.32007 Esmaili, 2014, Development of new potassium carbonate sorbent for CO2 capture under real flue gas conditions, Iranian Journal of Oil & Gas Science and Technology, 3, 39 Fan, 2018, Study on adsorption mechanism and failure characteristics of CO2 adsorption by potassium-based adsorbents with different supports, Materials, 11, 2424, 10.3390/ma11122424 Gao, 2013, First principles study on the adsorption of CO2 and H2O on the K2CO3 (001) surface, Surf Sci, 609, 140, 10.1016/j.susc.2012.11.014 Gao, 2017, Molten salts-modified MgO-based adsorbents for intermediate-temperature CO2 capture: A review, J. Energy Chem., 26, 830, 10.1016/j.jechem.2017.06.005 Gao, 2017, The 2°C global temperature target and the evolution of the long-term goal of addressing climate change-from the United Nations framework convention on climate change to the Paris agreement, Engineering, 3, 272, 10.1016/J.ENG.2017.01.022 Garg, 2010, Continuum simulations of CO2 capture by dry regenerable potassium based sorbents, 1 GCP, Global Carbon Project. http://www.globalcarbonproject.org/. Gomez, 2016, Experimental verification of the reaction mechanism of solid K2CO3 during postcombustion CO2 capture, Ind. Eng. Chem. Res., 55, 11022, 10.1021/acs.iecr.6b02916 Gouedard, 2012, Amine degradation in CO2 capture. I. A review, Int. J. Greenh. Gas Control, 10, 244, 10.1016/j.ijggc.2012.06.015 Guo, 2020, Experiment and kinetic model study on modified potassium-based CO2 adsorbent, Chem. Eng. J., 10.1016/j.cej.2020.125849 Guo, 2020, Experiment and regeneration kinetic model study on CO2 adsorbent prepared from fly ash, Chem. Eng. J., 10.1016/j.cej.2020.125849 Guo, 2020, Study on CO2 Capture Characteristics and Kinetics of Modified Potassium-Based Adsorbents, Materials, 13, 877, 10.3390/ma13040877 Guo, 2015, K2CO3-Modified Potassium Feldspar for CO2 Capture from Post-combustion Flue Gas, Energy Fuels, 29, 8151, 10.1021/acs.energyfuels.5b02207 Guo, 2016, Understanding the deactivation of K2CO3/AC for low-concentration CO2 removal in the presence of trace SO2 and NO2, Chem. Eng. J., 301, 325, 10.1016/j.cej.2016.05.011 Guo, 2017, Efficacious means for inhibiting the deactivation of K2CO3/AC for low-concentration CO2 removal in the presence of SO2 and NO2, Chem. Eng. J., 308, 516, 10.1016/j.cej.2016.09.085 Guo, 2020, Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption, Chem. Eng. J., 381, 10.1016/j.cej.2019.122736 Guo, 2018, Nanostructured MgO sorbents derived from organometallic magnesium precursors for post-combustion CO2 capture, Energy Fuels, 32, 6910, 10.1021/acs.energyfuels.8b00866 Guo, 2020, Structure-performance relationships of magnesium-based CO2 adsorbents prepared with different methods, Chem. Eng. J., 379, 10.1016/j.cej.2019.122277 Guo, 2019, Kinetic study on CO2 adsorption behaviors of amine-modified co-firing fly ash, J. Taiwan Inst. Chem. Eng., 96, 374, 10.1016/j.jtice.2018.12.003 Guo, 2015, CO2 adsorption kinetics of K2CO3/activated carbon for low-concentration CO2 removal from confined spaces, Chem. Eng. Technol., 38, 891, 10.1002/ceat.201400383 Guo, 2015, Thermogravimetric analysis of carbonation behaviors of several potassium-based sorbents in low concentration CO2, J. Therm. Anal. Calorim., 119, 441, 10.1007/s10973-014-4207-3 Guo, 2015, Thermogravimetric analysis of kinetic characteristics of K2CO3-impregnated mesoporous silicas in low-concentration CO2, Journal of Thermal Analysis and Calorimetry, 121, 1393, 10.1007/s10973-015-4537-9 Guo, 2014, Application of PEI–K2CO3/AC for capturing CO2 from flue gas after combustion, Appl. Energy, 129, 17, 10.1016/j.apenergy.2014.05.003 Guo, 2015, CO2 sorption and reaction kinetic performance of K2CO3/AC in low temperature and CO2 concentration, Chem. Eng. J., 260, 596, 10.1016/j.cej.2014.09.052 Guo, 2018, Facile synthesis of silica aerogel supported K2CO3 sorbents with enhanced CO2 capture capacity for ultra-dilute flue gas treatment, Fuel, 215, 735, 10.1016/j.fuel.2017.11.113 Haites, 2018, Carbon taxes and greenhouse gas emissions trading systems: what have we learned?, Climate Policy, 18, 955, 10.1080/14693062.2018.1492897 Hayashi, 1998, Efficient recovery of carbon dioxide from flue gases of coal-fired power plants by cyclic fixed-bed operations over K2CO3-on-carbon, Ind. Eng. Chem. Res., 37, 185, 10.1021/ie9704455 He, 2012, Membranes for environmentally friendly energy processes, Membranes, 2, 706, 10.3390/membranes2040706 Hu, 2021, Bifunctional Ni-Ca based material for integrated CO2 capture and conversion via calcium-looping dry reforming, Appl. Catal. B-Environ., 284, 10.1016/j.apcatb.2020.119734 Hu, 2018, Continuous CO2 capture and reduction in one process: CO2 methanation over unpromoted and promoted Ni/ZrO2, J. CO2 Util., 25, 323, 10.1016/j.jcou.2018.03.013 Hu, 2019, CO2 capture by Li4SiO4 sorbents and their applications: current developments and new trends, Chem. Eng. J., 359, 604, 10.1016/j.cej.2018.11.128 Jaiboon, 2013, Effect of flow patterns/regimes on CO2 capture using K2CO3 solid sorbent in fluidized bed/circulating fluidized bed, Chem. Eng. J., 219, 262, 10.1016/j.cej.2012.12.081 Jaiboon, 2015, Effect of regeneration temperature on the composition and carbon dioxide sorption ability of a K2CO3/Al2O3 solid sorbent in a bubbling fluidized bed reactor, Chem. Eng. Commun., 202, 361, 10.1080/00986445.2013.838163 Jayakumar, 2016, Post-combustion CO2 capture using solid K2CO3: Discovering the carbonation reaction mechanism, Appl. Energy, 179, 531, 10.1016/j.apenergy.2016.06.149 Jayakumar, 2017, Kinetic behavior of solid K2CO3 under postcombustion CO2 capture conditions, Ind. Eng. Chem. Res., 56, 853, 10.1021/acs.iecr.6b04498 Jo, 2016, Regenerable potassium-based alumina sorbents prepared by CO2 thermal treatment for post-combustion carbon dioxide capture, Korean J. Chem. Eng., 33, 3207, 10.1007/s11814-016-0162-y Jo, 2020, CO2 green technologies in CO2 capture and direct utilization processes: methanation, reverse water-gas shift, and dry reforming of methane, Sustainable Energy Fuels, 4, 5543, 10.1039/D0SE00951B Jongartklang, 2016, Correlations of kinetic parameters with various system operating conditions for CO2 sorption using K2CO3/Al2O3 solid sorbent in a fixed/fluidized bed reactor, J. Environ. Chem. Eng., 4, 1938, 10.1016/j.jece.2016.03.019 Kim, 2016, The absorption breakthrough characteristics of hydrogen chloride gas mixture on potassium-based solid sorbent at high temperature and high pressure, Energy Fuels, 30, 2268, 10.1021/acs.energyfuels.5b02473 Kim, 2012, Analysis of K2CO3/Al2O3 CO2 sorbent tested with coal-fired power plant flue gas: effect of SOx, Int. J. Greenh. Gas Control, 9, 347, 10.1016/j.ijggc.2012.04.004 Kosaka, 2021, Enhanced Activity of Integrated CO2 Capture and Reduction to CH4 under Pressurized Conditions toward Atmospheric CO2 Utilization, ACS Sustain. Chem. Eng., 9, 3452, 10.1021/acssuschemeng.0c07162 Kumar, 2014, A comparative study of CO2 sorption properties for different oxides, Mater. Renew. Sustain., 3, 30, 10.1007/s40243-014-0030-9 Largitte, 2016, A review of the kinetics adsorption models and their application to the adsorption of lead by an activated carbon, Chem. Eng. Res. Des., 109, 495, 10.1016/j.cherd.2016.02.006 Lee, 2013, Kinetic expression for the carbonation reaction of K2CO3/ZrO2 sorbent for CO2 capture, Ind. Eng. Chem. Res., 52, 9323, 10.1021/ie401407j Lee, 2011, The effect of relative humidity on CO2 capture capacity of potassium-based sorbents, Korean J. Chem. Eng., 28, 480, 10.1007/s11814-010-0398-x Lee, 2014, Effects of alumina phases on CO2 sorption and regeneration properties of potassium-based alumina sorbents, Adsorption, 20, 331, 10.1007/s10450-013-9596-2 Lee, 2006, CO2 absorption and regeneration of alkali metal-based solid sorbents, Catal. Today, 111, 385, 10.1016/j.cattod.2005.10.051 Lee, 2006, The effect of water on the activation and the CO2 capture capacities of alkali metal-based sorbents, Korean J. Chem. Eng., 23, 374, 10.1007/BF02706737 Lee, 2007, Dry potassium-based sorbents for CO2 capture, Catal. Surv. Asia, 11, 171, 10.1007/s10563-007-9035-z Lee, 2013, Improving regeneration properties of potassium-based alumina sorbents for carbon dioxide capture from flue gas, Fuel, 104, 882, 10.1016/j.fuel.2012.05.037 Lee, 2014, Excellent thermal stability of potassium-based sorbent using ZrO2 for post combustion CO2 capture, Fuel, 115, 97, 10.1016/j.fuel.2013.07.007 Lee, 2010, Structure effects of potassium-based TiO2 sorbents on the CO2 capture capacity, Top. Catal., 53, 641, 10.1007/s11244-010-9499-3 Lee, 2011, Development of new alumina-modified sorbents for CO2 sorption and regeneration at temperatures below 200°C, Fuel, 90, 1465, 10.1016/j.fuel.2010.11.006 Li, 2011, CO2 capture over K2CO3/MgO/Al2O3 dry sorbent in a fluidized bed, Energy Fuels, 25, 3835, 10.1021/ef200499b Li, 2019, Optimal design of negative emission hybrid renewable energy systems with biochar production, Appl. Energy, 243, 233, 10.1016/j.apenergy.2019.03.183 Li, 2013, Study of the novel KMgAl sorbents for CO2 capture, Energy Fuels, 27, 5388, 10.1021/ef4010412 Liang, 2020, Highly Dispersed Potassium-Based Nanowire Structure for Selectively Capturing Trace Hydrogen Chloride in H2S/CO2 Environments, Energy Fuels, 34, 11712, 10.1021/acs.energyfuels.0c02298 Liu, 2017, Insights into the mechanism of the capture of CO2 by K2CO3 sorbent: a DFT study, Phys. Chem. Chem. Phys., 19, 24357, 10.1039/C7CP02579C Liu, 2012, Performance enhancement of calcium oxide sorbents for cyclic CO2 capture-A review, Energy Fuels, 26, 2751, 10.1021/ef300220x Luo, 2015, Kinetics and structural changes in CO2 capture of K2CO3 under a moist condition, Energy Fuels, 29, 4472, 10.1021/acs.energyfuels.5b00578 Ma, 2019, Preparation of a morph-genetic CaO-based sorbent using paper fibre as a biotemplate for enhanced CO2 capture, Chem. Eng. J., 361, 235, 10.1016/j.cej.2018.12.061 Mao, 2006, Studies on the performance of CO2 adsorption using LiOH combined with activated carbon fiber, 297 Meis, 2013, Carbon nanofiber-supported K2CO3 as an efficient low-temperature regenerable CO2 sorbent for post-combustion capture, Ind. Eng. Chem. Res., 52, 12812, 10.1021/ie4017072 Nandy, 2016, Present status and overview of Chemical Looping Combustion technology, Renew. Sust. Energ. Rev., 59, 597, 10.1016/j.rser.2016.01.003 NASA, Climate Change and Global Warming. https://climate.nasa.gov/. Nasiman, 2020, CO2 Capture by a K2CO3–Carbon Composite under Moist Conditions, Ind. Eng. Chem. Res., 59, 3405, 10.1021/acs.iecr.9b05498 NOAA, Earth System Research Laboratories. https://www.esrl.noaa.gov/. Olk, 2015 Omodolor, 2020, Dual-Function Materials for CO2 Capture and Conversion: A Review, Ind. Eng. Chem. Res., 59, 17612, 10.1021/acs.iecr.0c02218 Onischak, M., Gidaspow, D., 1972. Kinetics of the reaction of CO2 with solid K2CO3, 73rd National AIChE Meeting. Pachauri, 2014, Climate change 2014: synthesis report Park, 2006, Carbonation kinetics of potassium carbonate by carbon dioxide, Journal of Industrial and Engineering Chemistry, 12, 522 Park, 2009, Effect of bed height on the carbon dioxide capture by carbonation/regeneration cyclic operations using dry potassium-based sorbents, Korean J. Chem. Eng., 26, 874, 10.1007/s11814-009-0146-2 Qin, 2014, Effect of support material on the performance of K2CO3-based pellets for cyclic CO2 capture, Appl. Energy, 136, 280, 10.1016/j.apenergy.2014.09.043 Qin, 2018, Application of density functional theory in studying CO2 capture with TiO2-supported K2CO3 being an example, Appl. Energy, 231, 167, 10.1016/j.apenergy.2018.09.114 Qiu, 2009, Critical review in adsorption kinetic models, J. Zhejiang Univ.-SCI A, 10, 716, 10.1631/jzus.A0820524 Querejeta, 2019, Enhanced capacity to CO2 sorption in humid conditions with a K-doped biocarbon, J. Energy Chem., 34, 208, 10.1016/j.jechem.2018.09.023 Raganati, 2021, Adsorption of Carbon Dioxide for Post-combustion Capture: A Review, Energy Fuels, 35, 12845, 10.1021/acs.energyfuels.1c01618 Rodríguez-Mosqueda, 2018, Parametrical study on CO2 capture from ambient air using hydrated K2CO3 supported on an activated carbon honeycomb, Ind. Eng. Chem. Res., 57, 3628, 10.1021/acs.iecr.8b00566 Rodríguez-Mosqueda, 2019, Low temperature water vapor pressure swing for the regeneration of adsorbents for CO2 enrichment in greenhouses via direct air capture, J. CO2 Util., 29, 65, 10.1016/j.jcou.2018.11.010 Samanta, 2011, Post-combustion CO2 capture using solid sorbents: a review, Ind. Eng. Chem. Res., 51, 1438, 10.1021/ie200686q Sanna, 2016, Potassium-based sorbents from fly ash for high-temperature CO2 capture, Environ. Sci. Pollut. Res., 23, 22242, 10.1007/s11356-016-6378-x Santos, F.M., Gonçalves, A.L., Pires, J.C., 2019. Negative emission technologies, Bioenergy with Carbon Capture and Storage. Elsevier, pp. 1-13. Satyapal, 2001, Performance and properties of a solid amine sorbent for carbon dioxide removal in space life support applications, Energy Fuels, 15, 250, 10.1021/ef0002391 Sengupta, 2018, Circulating Fluid-Bed Studies for CO2 Capture from Flue Gas using K2CO3/Al2O3 Adsorbent, Energy Fuels, 32, 8594, 10.1021/acs.energyfuels.8b01383 Sengupta, 2014, Effects of the adsorbent preparation method for CO2 capture from flue gas using K2CO3/Al2O3 adsorbents, Energy Fuels, 29, 287, 10.1021/ef501792c Sengupta, 2014, Improvement in regeneration properties and multicycle stability for K2CO3/Al2O3 adsorbents for CO2 removal from flue gas, Energy Fuels, 28, 5354, 10.1021/ef501174m Seo, 2009, Effect of reaction temperature on CO2 capture using potassium-based solid sorbent in bubbling fluidized-bed reactor, J. Environ. Eng., 135, 473, 10.1061/(ASCE)0733-9372(2009)135:6(473) Seo, 2007, Effect of water pretreatment on CO2 capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor, Korean J. Chem. Eng., 24, 457, 10.1007/s11814-007-0079-6 Shigemoto, 2006, Material balance and energy consumption for CO2 recovery from moist flue gas employing K2CO3-on-activated carbon and its evaluation for practical adaptation, Energy Fuels, 20, 721, 10.1021/ef058027x Song, 2018, Review of reactor for chemical looping combustion of solid fuels, Int. J. Greenh. Gas Control, 76, 92, 10.1016/j.ijggc.2018.06.004 Sun, 2019, Dual functional catalytic materials of Ni over Ce-modified CaO sorbents for integrated CO2 capture and conversion, Appl. Catal. B-Environ., 244, 63, 10.1016/j.apcatb.2018.11.040 Sun, 2020, Direct and highly selective conversion of captured CO2 into methane through integrated carbon capture and utilization over dual functional materials, J. CO2 Util., 38, 262, 10.1016/j.jcou.2020.02.001 Sun, 2019, Evaluation of high-temperature CO2 capture performance of cellulose-templated CaO-based pellets, Fuel, 239, 1046, 10.1016/j.fuel.2018.11.123 Sun, 2021, Recent advances in integrated CO2 capture and utilization: A review, Sustainable Energy Fuels, 5, 4546, 10.1039/D1SE00797A Tanzer, 2019, When are negative emissions negative emissions?, Energy Environ. Sci., 12, 1210, 10.1039/C8EE03338B Thiruvenkatachari, 2009, Post combustion CO2 capture by carbon fibre monolithic adsorbents, Prog. Energy Combust. Sci., 35, 438, 10.1016/j.pecs.2009.05.003 Tuwati, 2013, New CO2 sorbent synthesized with nanoporous TiO(OH)2 and K2CO3, Energy Fuels, 27, 7628, 10.1021/ef401368n Veselovskaya, 2015, Direct CO2 capture from ambient air by K2CO3/alumina composite sorbent for synthesis of renewable methane, Renewable Bioresources, 3, 1, 10.7243/2052-6237-3-1 Veselovskaya, 2013, Direct CO2 capture from ambient air using K2CO3/Al2O3 composite sorbent, Int. J. Greenh. Gas Control, 17, 332, 10.1016/j.ijggc.2013.05.006 Veselovskaya, 2018, Catalytic methanation of carbon dioxide captured from ambient air, Energy, 159, 766, 10.1016/j.energy.2018.06.180 Veselovskaya, 2018, A Novel Process for Renewable Methane Production: Combining Direct Air Capture by K2CO3/Alumina Sorbent with CO2 Methanation over Ru/Alumina Catalyst, Top. Catal., 61, 1528, 10.1007/s11244-018-0997-z Veselovskaya, 2017, Catalytic process for methane production from atmospheric carbon dioxide utilizing renewable energy, Catal. Today, 298, 117, 10.1016/j.cattod.2017.05.044 Wall, 2007, Combustion processes for carbon capture, Proc. Combust. Inst., 31, 31, 10.1016/j.proci.2006.08.123 Wang, 2014, Recent advances in solid sorbents for CO2 capture and new development trends, Energy Environ. Sci., 7, 3478, 10.1039/C4EE01647E Wang, 2013, Regeneration dynamics of potassium-based sediment sorbents for CO2 capture, Korean J. Chem. Eng., 30, 1631, 10.1007/s11814-013-0090-z Wang, 2011, Post-combustion CO2 capture with chemical absorption: A state-of-the-art review, Chem. Eng. Res. Des., 89, 1609, 10.1016/j.cherd.2010.11.005 Wang, 2019, Structurally improved, urea-templated, K2CO3-based sorbent pellets for CO2 capture, Chem. Eng. J., 374, 20, 10.1016/j.cej.2019.05.091 Wang, 2011, CO2 capture by solid adsorbents and their applications: current status and new trends, Energy Environ. Sci., 4, 42, 10.1039/C0EE00064G Wang, 2011, Recent advances in capture of carbon dioxide using alkali-metal-based oxides, Energy Environ. Sci., 4, 3805, 10.1039/c1ee01116b Wang, 2015, Tetraethylenepentamine-modified MCM-41/silica gel with hierarchical mesoporous structure for CO2 capture, Chem. Eng. J., 273, 472, 10.1016/j.cej.2015.03.098 Wang, 2020, K2CO3-Impregnated Al/Si Aerogel Prepared by Ambient Pressure Drying for CO2 Capture: Synthesis, Characterization and Adsorption Characteristics, Materials, 13, 3741, 10.3390/ma13173741 Won, 2020, Post-combustion CO2 capture process in a circulated fluidized bed reactor using 200 kg potassium-based sorbent: The optimization of regeneration condition, Energy, 208, 10.1016/j.energy.2020.118188 Wu, 2015, The negative effects of SO2 on CO2 capture with K2CO3/Al2O3, J. Therm. Anal. Calorim., 122, 1041, 10.1007/s10973-015-4839-y Wu, 2013, K2CO3/Al2O3 for Capturing CO2 in Flue Gas from Power Plants. Part 5: Carbonation and Failure Behavior of K2CO3/Al2O3 in the Continuous CO2 Sorption–Desorption System, Energy Fuels, 27, 4804, 10.1021/ef400778d Wu, 2015, Development of K and N based composite CO2 sorbents (KN) dried with a supercritical fluid, Chem. Eng. J., 262, 1192, 10.1016/j.cej.2014.10.027 Wu, 2014, Inexpensive calcium-modified potassium carbonate sorbent for CO2 capture from flue gas: improved SO2 resistance, enhanced capacity and stability, Fuel, 125, 50, 10.1016/j.fuel.2014.02.014 Wu, 2011, Study on the failure mechanism of potassium-based sorbent for CO2 capture and the improving measure, Int. J. Greenh. Gas Control, 5, 1184, 10.1016/j.ijggc.2011.05.034 Wu, 2011, Effects of SO2/NO on CO2 capture characteristics of K2CO3/Al2O3 in a bubbling fluidized-bed reactor, 1321 Yang, 2016, CO2 Capture by Carbon Aerogel–Potassium Carbonate Nanocomposites, Int. J. Chem. Eng. 2016, 1 Yang, 2008, Progress in carbon dioxide separation and capture: A review, J. Environ. Sci., 20, 14, 10.1016/S1001-0742(08)60002-9 Yang, 2018, One-step synthesis of porous Li4SiO4-based adsorbent pellets via graphite moulding method for cyclic CO2 capture, Chem. Eng. J., 353, 92, 10.1016/j.cej.2018.07.044 Yi, 2007, Continuous operation of the potassium-based dry sorbent CO2 capture process with two fluidized-bed reactors, Int. J. Greenh. Gas Control, 1, 31, 10.1016/S1750-5836(07)00014-X Yi, 2014, Simultaneous Adsorption of SO2, NO, and CO2 by K2CO3-Modified γ-Alumina, Chem. Eng. Technol., 37, 1049, 10.1002/ceat.201300749 Zhang, 2011, CO2 separation by a new solid K−Fe sorbent, Energy Fuels, 25, 1919, 10.1021/ef200005x Zhang, 2020, Regeneration reaction characteristics and mechanism model of K2CO3/Al2O3 sorbent for CO2 capture, Asia-Pacific Journal of Chemical Engineering, e2557 Zhao, 2013, Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent, Prog. Energy Combust. Sci., 39, 515, 10.1016/j.pecs.2013.05.001 Zhao, 2009, Characteristics of regeneration reaction of dry potassium-based sorbent for CO2 capture, Journal of Engineering Thermophysics, 30, 2145 Zhao, 2009, CO2 absorption using dry potassium-based sorbents with different supports, Energy Fuels, 23, 4683, 10.1021/ef900182d Zhao, 2009, Effect of crystal structure on CO2 capture characteristics of dry potassium-based sorbents, Chemosphere, 75, 1401, 10.1016/j.chemosphere.2009.02.045 Zhao, 2010, Study on CO2 capture using dry potassium-based sorbents through orthogonal test method, Int. J. Greenh. Gas Control, 4, 655, 10.1016/j.ijggc.2009.12.010 Zhao, 2011, Carbonation and active-component-distribution behaviors of several potassium-based sorbents, Ind. Eng. Chem. Res., 50, 4464, 10.1021/ie200153c Zhao, 2012, Carbonation behavior and the reaction kinetic of a new dry potassium-based sorbent for CO2 capture, Ind. Eng. Chem. Res., 51, 14361, 10.1021/ie302497r Zhao, 2012, K2CO3/Al2O3 for capturing CO2 in flue gas from power plants. Part 1: Carbonation behaviors of K2CO3/Al2O3, Energy Fuels, 26, 1401, 10.1021/ef200725z Zhao, 2012, K2CO3/Al2O3 for capturing CO2 in flue gas from power plants. Part 2: Regeneration behaviors of K2CO3/Al2O3, Energy Fuels, 26, 1406, 10.1021/ef200866y Zhao, 2009, Carbonation and hydration characteristics of dry potassium-based sorbents for CO2 capture, Energy Fuels, 23, 1766, 10.1021/ef800889m Zhao, 2012, K2CO3/Al2O3 for capturing CO2 in flue gas from power plants. Part 3: CO2 capture behaviors of K2CO3/Al2O3 in a bubbling fluidized-bed reactor, Energy Fuels, 26, 3062, 10.1021/ef300225a Zhao, 2014, Carbonation behavior of K2CO3/AC in low reaction temperature and CO2 concentration, Chem. Eng. J., 254, 524, 10.1016/j.cej.2014.05.062 Zhao, 2014, Removal of low concentration CO2 at ambient temperature using several potassium-based sorbents, Appl. Energy, 124, 241, 10.1016/j.apenergy.2014.02.054 Zhao, 2017, Experimental and modeling investigation on CO2 sorption kinetics over K2CO3-modified silica aerogels, Chem. Eng. J., 312, 50, 10.1016/j.cej.2016.11.121 Zhao, 2013, Effect of K2CO3•1.5H2O on the regeneration energy consumption of potassium-based sorbents for CO2 capture, Appl. Energy, 112, 381, 10.1016/j.apenergy.2013.06.018 Zhao, 2017, Density functional theory and reactive dynamics study of catalytic performance of TiO2 on CO2 desorption process with KHCO3/TiO2/Al2O3 sorbent, Mol. Catal., 439, 143, 10.1016/j.mcat.2017.06.025 Zhou, 2020, 2D-Layered Ni–MgO–Al2O3 Nanosheets for Integrated Capture and Methanation of CO2, ChemSusChem, 13, 360, 10.1002/cssc.201902828